From: Rasmus Villemoes Date: Thu, 24 Oct 2024 10:01:45 +0000 (+0200) Subject: imx8m: set sane default value for SPL_LOAD_FIT_ADDRESS X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=4f5c48d5fdab0fae189ae9d59a9266aceb261ecd;p=u-boot.git imx8m: set sane default value for SPL_LOAD_FIT_ADDRESS I enabled IMX_HAB on an imx8mp board, but even though I knew about the implementation, I forgot that I had to provide a sane value for SPL_LOAD_FIT_ADDRESS. The help text for IMX_HAB doesn't mention this implicit requirement, and there's no build-time warning; the default 0x0 value just ends up being returned from board_spl_fit_buffer_addr(), obviously resulting in a non-booting board. The existing imx8m* board configs that set a non-zero value currently all use 0x44000000. The actual value doesn't matter too much, but 0 is always wrong for imx8m platforms. So just use 0x44000000 as default for those platforms. Signed-off-by: Rasmus Villemoes --- diff --git a/boot/Kconfig b/boot/Kconfig index b168b6bbcc..b9287c6068 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -233,6 +233,7 @@ config SPL_LOAD_FIT config SPL_LOAD_FIT_ADDRESS hex "load address of fit image" depends on SPL_LOAD_FIT + default 0x44000000 if ARCH_IMX8M default 0x0 help Specify the load address of the fit image that will be loaded