From: Pali Rohár Date: Thu, 11 Nov 2021 15:35:42 +0000 (+0100) Subject: pci: pci_mvebu: Move setup for BAR[0] where other BARs are setup X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=4a1a593d1783e5292cd48ea66d0b13977aa16d86;p=u-boot.git pci: pci_mvebu: Move setup for BAR[0] where other BARs are setup Function mvebu_pcie_setup_wins() sets up all other BARs, so move setup of BAR[0] to this function to have common code at one place. In the past, commit 193a1e9f196b ("pci: pci_mvebu: set BAR0 after memory space is set") moved setup of BAR[0] to another location, due to ath10k not working in kernel, but the reason why was unknown, but it seems to work now, and we think the issue then was cause by the PCIe Root Port presenting itself as a Memory Controller and therefore U-Boot's code have overwritten the BAR. Since the driver now ignores any write operations to PCIe Root Port BARs, this should not be an issue anymore. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Reviewed-by: Stefan Roese --- diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index cc8ebff0c6..7c8807ade8 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -314,7 +314,9 @@ static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf, /* * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * BAR[0] -> internal registers + * BAR[1] -> covers all DRAM banks + * BAR[2] -> disabled * WIN[0-3] -> DRAM bank[0-3] */ static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) @@ -365,6 +367,10 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie) writel(0, pcie->base + PCIE_BAR_HI_OFF(1)); writel(((size - 1) & 0xffff0000) | 0x1, pcie->base + PCIE_BAR_CTRL_OFF(1)); + + /* Setup BAR[0] to internal registers. */ + writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); + writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); } static int mvebu_pcie_probe(struct udevice *dev) @@ -475,10 +481,6 @@ static int mvebu_pcie_probe(struct udevice *dev) pcie->io.start, MBUS_PCI_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; - /* Set BAR0 to internal registers */ - writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); - writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); - /* PCI Bridge support 32-bit I/O and 64-bit prefetch mem addressing */ pcie->cfgcache[(PCI_IO_BASE - 0x10) / 4] = PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8);