From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 18 May 2018 11:15:07 +0000 (+0200)
Subject: usb: xhci: zynqmp: Add support for DM_USB
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=41a3d4fda4377e971c4fbc7d0b7f335f2c4373ad;p=u-boot.git

usb: xhci: zynqmp: Add support for DM_USB

The patch is adding support for DM_USB for xhci driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/drivers/usb/host/xhci-zynqmp.c b/drivers/usb/host/xhci-zynqmp.c
index 1723d2f686..a8829d9baa 100644
--- a/drivers/usb/host/xhci-zynqmp.c
+++ b/drivers/usb/host/xhci-zynqmp.c
@@ -10,6 +10,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <usb.h>
 #include <linux/errno.h>
 #include <asm/arch-zynqmp/hardware.h>
@@ -54,13 +55,23 @@
 #define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	BIT(17)
 
 struct zynqmp_xhci {
+#ifdef CONFIG_DM_USB
+	struct usb_platdata usb_plat;
+#endif
+	struct xhci_ctrl ctrl;
 	struct xhci_hccr *hcd;
 	struct dwc3 *dwc3_reg;
 };
 
+#ifdef CONFIG_DM_USB
+struct zynqmp_xhci_platdata {
+	fdt_addr_t hcd_base;
+};
+#else
 static struct zynqmp_xhci zynqmp_xhci;
 
 unsigned long ctr_addr[] = CONFIG_ZYNQMP_XHCI_LIST;
+#endif
 
 static int zynqmp_xhci_core_init(struct zynqmp_xhci *zynqmp_xhci)
 {
@@ -78,6 +89,7 @@ static int zynqmp_xhci_core_init(struct zynqmp_xhci *zynqmp_xhci)
 	return ret;
 }
 
+#ifndef CONFIG_DM_USB
 int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
 {
 	struct zynqmp_xhci *ctx = &zynqmp_xhci;
@@ -111,6 +123,7 @@ int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
 
 	return ret;
 }
+#endif
 
 void xhci_hcd_stop(int index)
 {
@@ -121,3 +134,59 @@ void xhci_hcd_stop(int index)
 
 	return;
 }
+
+#ifdef CONFIG_DM_USB
+static int xhci_usb_probe(struct udevice *dev)
+{
+	struct zynqmp_xhci_platdata *plat = dev_get_platdata(dev);
+	struct zynqmp_xhci *ctx = dev_get_priv(dev);
+	struct xhci_hcor *hcor;
+	int ret;
+
+	ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
+	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+
+	ret = zynqmp_xhci_core_init(ctx);
+	if (ret) {
+		puts("XHCI: failed to initialize controller\n");
+		return -EINVAL;
+	}
+
+	hcor = (struct xhci_hcor *)((ulong)ctx->hcd +
+				  HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
+
+	return xhci_register(dev, ctx->hcd, hcor);
+}
+
+static int xhci_usb_remove(struct udevice *dev)
+{
+	return xhci_deregister(dev);
+}
+
+static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+	struct zynqmp_xhci_platdata *plat = dev_get_platdata(dev);
+	const void *blob = gd->fdt_blob;
+
+	/* Get the base address for XHCI controller from the device node */
+	plat->hcd_base = fdtdec_get_addr(blob, dev_of_offset(dev), "reg");
+	if (plat->hcd_base == FDT_ADDR_T_NONE) {
+		debug("Can't get the XHCI register base address\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+U_BOOT_DRIVER(dwc3_generic_host) = {
+	.name = "dwc3-generic-host",
+	.id = UCLASS_USB,
+	.ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
+	.probe = xhci_usb_probe,
+	.remove = xhci_usb_remove,
+	.ops = &xhci_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct zynqmp_xhci_platdata),
+	.priv_auto_alloc_size = sizeof(struct zynqmp_xhci),
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif