From: Peng Fan Date: Fri, 10 Aug 2018 06:07:54 +0000 (+0800) Subject: mmc: add HS400 support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=3dd2626f48af6f459b8bfb9ce7c6832b0606e813;p=u-boot.git mmc: add HS400 support Add HS400 support. Selecting HS400 needs first select HS200 according to spec, so use a dedicated function for HS400. Add HS400 related macros. Remove the restriction of only using the low 6 bits of EXT_CSD_CARD_TYPE, using all the 8 bits. Signed-off-by: Peng Fan Cc: Jaehoon Chung Cc: Jean-Jacques Hiblot Cc: Stefano Babic Cc: Kishon Vijay Abraham I Cc: Faiz Abbas Cc: Marek Vasut Signed-off-by: Peng Fan --- diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 377b1c4b3b..1616022b91 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -111,6 +111,19 @@ config SPL_MMC_UHS_SUPPORT cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus frequency can go up to 208MHz (SDR104) +config MMC_HS400_SUPPORT + bool "enable HS400 support" + select MMC_HS200_SUPPORT + help + The HS400 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config SPL_MMC_HS400_SUPPORT + bool "enable HS400 support in SPL" + help + The HS400 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + config MMC_HS200_SUPPORT bool "enable HS200 support" help diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index ad429f49c9..585951cd78 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -147,6 +147,7 @@ const char *mmc_mode_name(enum bus_mode mode) [MMC_HS_52] = "MMC High Speed (52MHz)", [MMC_DDR_52] = "MMC DDR52 (52MHz)", [MMC_HS_200] = "HS200 (200MHz)", + [MMC_HS_400] = "HS400 (200MHz)", }; if (mode >= MMC_MODES_END) @@ -171,6 +172,7 @@ static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode) [UHS_DDR50] = 50000000, [UHS_SDR104] = 208000000, [MMC_HS_200] = 200000000, + [MMC_HS_400] = 200000000, }; if (mode == MMC_LEGACY) @@ -769,6 +771,11 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode) case MMC_HS_200: speed_bits = EXT_CSD_TIMING_HS200; break; +#endif +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) + case MMC_HS_400: + speed_bits = EXT_CSD_TIMING_HS400; + break; #endif case MMC_LEGACY: speed_bits = EXT_CSD_TIMING_LEGACY; @@ -816,7 +823,7 @@ static int mmc_get_capabilities(struct mmc *mmc) mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT; - cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0x3f; + cardtype = ext_csd[EXT_CSD_CARD_TYPE]; mmc->cardtype = cardtype; #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) @@ -824,6 +831,12 @@ static int mmc_get_capabilities(struct mmc *mmc) EXT_CSD_CARD_TYPE_HS200_1_8V)) { mmc->card_caps |= MMC_MODE_HS200; } +#endif +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) + if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V | + EXT_CSD_CARD_TYPE_HS400_1_8V)) { + mmc->card_caps |= MMC_MODE_HS400; + } #endif if (cardtype & EXT_CSD_CARD_TYPE_52) { if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) @@ -1734,10 +1747,13 @@ static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, u32 card_mask = 0; switch (mode) { + case MMC_HS_400: case MMC_HS_200: - if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_8V) + if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V | + EXT_CSD_CARD_TYPE_HS400_1_8V)) card_mask |= MMC_SIGNAL_VOLTAGE_180; - if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_2V) + if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V | + EXT_CSD_CARD_TYPE_HS400_1_2V)) card_mask |= MMC_SIGNAL_VOLTAGE_120; break; case MMC_DDR_52: @@ -1773,6 +1789,13 @@ static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, #endif static const struct mode_width_tuning mmc_modes_by_pref[] = { +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) + { + .mode = MMC_HS_400, + .widths = MMC_MODE_8BIT, + .tuning = MMC_CMD_SEND_TUNING_BLOCK_HS200 + }, +#endif #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) { .mode = MMC_HS_200, @@ -1816,6 +1839,54 @@ static const struct ext_csd_bus_width { {MMC_MODE_1BIT, false, EXT_CSD_BUS_WIDTH_1}, }; +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) +static int mmc_select_hs400(struct mmc *mmc) +{ + int err; + + /* Set timing to HS200 for tuning */ + err = mmc_set_card_speed(mmc, MMC_HS_200); + if (err) + return err; + + /* configure the bus mode (host) */ + mmc_select_mode(mmc, MMC_HS_200); + mmc_set_clock(mmc, mmc->tran_speed, false); + + /* execute tuning if needed */ + err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200); + if (err) { + debug("tuning failed\n"); + return err; + } + + /* Set back to HS */ + mmc_set_card_speed(mmc, MMC_HS); + mmc_set_clock(mmc, mmc_mode2freq(mmc, MMC_HS), false); + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, + EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG); + if (err) + return err; + + err = mmc_set_card_speed(mmc, MMC_HS_400); + if (err) + return err; + + mmc_select_mode(mmc, MMC_HS_400); + err = mmc_set_clock(mmc, mmc->tran_speed, false); + if (err) + return err; + + return 0; +} +#else +static int mmc_select_hs400(struct mmc *mmc) +{ + return -ENOTSUPP; +} +#endif + #define for_each_supported_width(caps, ddr, ecbv) \ for (ecbv = ext_csd_bus_width;\ ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\ @@ -1869,37 +1940,49 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) goto error; mmc_set_bus_width(mmc, bus_width(ecbw->cap)); - /* configure the bus speed (card) */ - err = mmc_set_card_speed(mmc, mwt->mode); - if (err) - goto error; - - /* - * configure the bus width AND the ddr mode (card) - * The host side will be taken care of in the next step - */ - if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) { - err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ecbw->ext_csd_bits); + if (mwt->mode == MMC_HS_400) { + err = mmc_select_hs400(mmc); + if (err) { + printf("Select HS400 failed %d\n", err); + goto error; + } + } else { + /* configure the bus speed (card) */ + err = mmc_set_card_speed(mmc, mwt->mode); if (err) goto error; - } - /* configure the bus mode (host) */ - mmc_select_mode(mmc, mwt->mode); - mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE); + /* + * configure the bus width AND the ddr mode + * (card). The host side will be taken care + * of in the next step + */ + if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) { + err = mmc_switch(mmc, + EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ecbw->ext_csd_bits); + if (err) + goto error; + } + + /* configure the bus mode (host) */ + mmc_select_mode(mmc, mwt->mode); + mmc_set_clock(mmc, mmc->tran_speed, + MMC_CLK_ENABLE); #ifdef MMC_SUPPORTS_TUNING - /* execute tuning if needed */ - if (mwt->tuning) { - err = mmc_execute_tuning(mmc, mwt->tuning); - if (err) { - pr_debug("tuning failed\n"); - goto error; + /* execute tuning if needed */ + if (mwt->tuning) { + err = mmc_execute_tuning(mmc, + mwt->tuning); + if (err) { + pr_debug("tuning failed\n"); + goto error; + } } - } #endif + } /* do a transfer to check the configuration */ err = mmc_read_and_compare_ext_csd(mmc); diff --git a/include/mmc.h b/include/mmc.h index df4255b828..9b9cbedadc 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -64,6 +64,7 @@ #define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52) #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) +#define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) #define MMC_MODE_8BIT BIT(30) #define MMC_MODE_4BIT BIT(29) @@ -248,6 +249,10 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) /* SDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ EXT_CSD_CARD_TYPE_HS200_1_2V) +#define EXT_CSD_CARD_TYPE_HS400_1_8V BIT(6) +#define EXT_CSD_CARD_TYPE_HS400_1_2V BIT(7) +#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ + EXT_CSD_CARD_TYPE_HS400_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ @@ -259,6 +264,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ #define EXT_CSD_TIMING_HS 1 /* HS */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ +#define EXT_CSD_TIMING_HS400 3 /* HS400 */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -519,6 +525,7 @@ enum bus_mode { UHS_DDR50, UHS_SDR104, MMC_HS_200, + MMC_HS_400, MMC_MODES_END }; @@ -532,6 +539,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode) #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) else if (mode == UHS_DDR50) return true; +#endif +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) + else if (mode == MMC_HS_400) + return true; #endif else return false;