From: Johan Jonker Date: Fri, 20 Aug 2021 17:27:59 +0000 (+0200) Subject: doc: rockchip: write all brand names with a capital X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=3ad88ecc6bede44b8bf22d62f290be4cb0962e18;p=u-boot.git doc: rockchip: write all brand names with a capital Brand names are supposed to be written with a capital, so change them all. Signed-off-by: Johan Jonker Reviewed-by: Kever Yang --- diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 8d75efc023..144cb98ef9 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -16,10 +16,10 @@ Rockchip boards Rockchip is SoC solutions provider for tablets & PCs, streaming media TV boxes, AI audio & vision, IoT hardware. -A wide range of Rockchip SoCs with associated boardsare supported in +A wide range of Rockchip SoCs with associated boards are supported in mainline U-Boot. -List of mainline supported rockchip boards: +List of mainline supported Rockchip boards: * rk3036 - Rockchip Evb-RK3036 (evb-rk3036) @@ -93,7 +93,7 @@ To build TF-A:: make realclean make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 -Specify the PLAT= with desired rockchip platform to build TF-A for. +Specify the PLAT= with desired Rockchip platform to build TF-A for. U-Boot ^^^^^^ @@ -130,7 +130,7 @@ Flashing SD Card ^^^^^^^ -All rockchip platforms, except rk3128 (which doesn't use SPL) are now +All Rockchip platforms, except rk3128 (which doesn't use SPL) are now supporting single boot image using binman and pad_cat. To write an image that boots from an SD card (assumed to be /dev/sda):: @@ -141,7 +141,7 @@ To write an image that boots from an SD card (assumed to be /dev/sda):: eMMC ^^^^ -eMMC flash would probe on mmc0 in most of the rockchip platforms. +eMMC flash would probe on mmc0 in most of the Rockchip platforms. Create GPT partition layout as defined in configurations:: @@ -164,7 +164,7 @@ Program the flash:: sudo fastboot -i 0x2207 flash loader1 idbloader.img sudo fastboot -i 0x2207 flash loader2 u-boot.itb -Note: for rockchip 32-bit platforms the U-Boot proper image +Note: for Rockchip 32-bit platforms the U-Boot proper image is u-boot-dtb.img SPI @@ -227,8 +227,8 @@ Note: TODO ---- -- Add rockchip idbloader image building -- Add rockchip TPL image building +- Add Rockchip idbloader image building +- Add Rockchip TPL image building - Document SPI flash boot - Add missing SoC's with it boards list