From: Marek Vasut Date: Mon, 2 Sep 2024 13:37:09 +0000 (+0200) Subject: mmc: Hide mmc speed command under mmc command X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=39aa94a5c372f9daaae3f4eb11c26cf900de2094;p=u-boot.git mmc: Hide mmc speed command under mmc command The mmc speed command configuration option keeps showing up in Kconfig directly in 'Command line interface'. Move MMC_SPEED_MODE_SET under CMD_MMC to make it show up alongside the MMC command. Signed-off-by: Marek Vasut Reviewed-by: Quentin Schulz Reviewed-by: Mattijs Korpershoek --- diff --git a/cmd/Kconfig b/cmd/Kconfig index 43f78a5aeb..953e1f0ef2 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1406,6 +1406,15 @@ config CMD_MMC_SWRITE Enable support for the "mmc swrite" command to write Android sparse images to eMMC. +config MMC_SPEED_MODE_SET + bool "set speed mode using mmc command" + help + Enable setting speed mode using mmc rescan and mmc dev commands. + The speed mode is provided as the last argument in these commands + and is indicated using the index from enum bus_mode in + include/mmc.h. A speed mode can be set only if it has already + been enabled in the device tree. + endif config CMD_CLONE @@ -2971,16 +2980,6 @@ config CMD_UBIFS help UBIFS is a file system for flash devices which works on top of UBI. -config MMC_SPEED_MODE_SET - bool "set speed mode using mmc command" - depends on CMD_MMC - help - Enable setting speed mode using mmc rescan and mmc dev commands. - The speed mode is provided as the last argument in these commands - and is indicated using the index from enum bus_mode in - include/mmc.h. A speed mode can be set only if it has already - been enabled in the device tree. - config CMD_MESON bool "Amlogic Meson commands" depends on ARCH_MESON