From: Peng Fan Date: Wed, 16 Oct 2019 10:24:30 +0000 (+0000) Subject: arm: dts: imx8mm: sync dts from Linux Kernel X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=387c44904d4706325715d58e17fd3789596e0a26;p=u-boot.git arm: dts: imx8mm: sync dts from Linux Kernel Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1 Signed-off-by: Peng Fan --- diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi index 10d9a20f2a..16093f2067 100644 --- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi @@ -3,7 +3,7 @@ * Copyright 2019 NXP */ -&{/soc} { +&{/soc@0} { u-boot,dm-pre-reloc; u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mm-evk.dts b/arch/arm/dts/imx8mm-evk.dts index 2d5d89475b..faefb7182a 100644 --- a/arch/arm/dts/imx8mm-evk.dts +++ b/arch/arm/dts/imx8mm-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include #include "imx8mm.dtsi" / { @@ -37,6 +38,41 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -54,19 +90,208 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-okay; - at803x,vddio-1p8v; }; }; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 8>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -124,12 +349,60 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi index 6b407a94c0..8aafad2449 100644 --- a/arch/arm/dts/imx8mm.dtsi +++ b/arch/arm/dts/imx8mm.dtsi @@ -44,6 +44,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -53,6 +66,9 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -64,6 +80,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -75,6 +92,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -86,6 +104,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -100,12 +119,23 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; + opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x8>, <0x3>; clock-latency-ns = <150000>; opp-suspend; }; @@ -158,15 +188,6 @@ clock-output-names = "clk_ext4"; }; - gic: interrupt-controller@38800000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = ; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -189,7 +210,23 @@ arm,no-tick-in-suspend; }; - soc { + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,17 +236,85 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30000000 0x30000000 0x400000>; + + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; }; gpio2: gpio@30210000 { @@ -217,10 +322,12 @@ reg = <0x30210000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; }; gpio3: gpio@30220000 { @@ -228,10 +335,12 @@ reg = <0x30220000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; }; gpio4: gpio@30230000 { @@ -239,10 +348,12 @@ reg = <0x30230000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 87 32>; }; gpio5: gpio@30240000 { @@ -250,10 +361,12 @@ reg = <0x30240000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; }; wdog1: watchdog@30280000 { @@ -313,12 +426,16 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: anatop@30360000 { @@ -336,6 +453,8 @@ offset = <0x34>; interrupts = , ; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { @@ -344,6 +463,7 @@ interrupts = ; linux,keycode = ; wakeup-source; + status = "disabled"; }; }; @@ -355,10 +475,22 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MM_CLK_NOC>, + <&clk IMX8MM_CLK_AUDIO_AHB>, + <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, + <&clk IMX8MM_SYS_PLL3>, + <&clk IMX8MM_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <0>, + <400000000>, + <400000000>, + <750000000>, + <594000000>; }; src: reset-controller@30390000 { - compatible = "fsl,imx8mm-src", "syscon"; + compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = ; #reset-cells = <1>; @@ -369,7 +501,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30400000 0x30400000 0x400000>; pwm1: pwm@30660000 { compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; @@ -414,13 +546,21 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = ; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30800000 0x30800000 0x400000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -554,7 +694,7 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -570,7 +710,7 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -584,7 +724,7 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -639,7 +779,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x32c00000 0x32c00000 0x400000>; usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; @@ -647,23 +787,13 @@ interrupts = ; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc1: usbmisc@32e40200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -676,23 +806,13 @@ interrupts = ; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; status = "disabled"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc2: usbmisc@32e50200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -729,5 +849,21 @@ dma-names = "rx-tx"; status = "disabled"; }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupt-parent = <&gic>; + interrupts = ; + }; }; };