From: Christian Hewitt Date: Mon, 20 Mar 2023 11:45:47 +0000 (+0000) Subject: doc: boards: amlogic: update documentation for Khadas VIM3L X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=2cdd4e758368eeb28f4cafe90720de2e4a6194cb;p=u-boot.git doc: boards: amlogic: update documentation for Khadas VIM3L Improve documentation. Signed-off-by: Christian Hewitt Link: https://lore.kernel.org/r/20230320114609.930145-12-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong --- diff --git a/doc/board/amlogic/khadas-vim3l.rst b/doc/board/amlogic/khadas-vim3l.rst index 692ab3d21d..cd21466f70 100644 --- a/doc/board/amlogic/khadas-vim3l.rst +++ b/doc/board/amlogic/khadas-vim3l.rst @@ -1,10 +1,10 @@ .. SPDX-License-Identifier: GPL-2.0+ -U-Boot for Khadas VIM3L -======================= +U-Boot for Khadas VIM3L (S905D3) +================================ -Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion -Technology Co., Ltd. with the following specifications: +Khadas VIM3L is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd +with the following specifications: - Amlogic S905D3 Arm Cortex-A55 quad-core SoC - 2GB LPDDR4 SDRAM @@ -20,32 +20,27 @@ Schematics are available on the manufacturer website. PCIe Setup ---------- -The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential -lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between -an USB3.0 Type A connector and a M.2 Key M slot. -The PHY driving these differential lines is shared between -the USB3.0 controller and the PCIe Controller, thus only -a single controller can use it. -To setup for PCIe, run the following commands from U-Boot: +The on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB +3.1 SuperSpeed Data Switch between a USB3.0 Type-A connector and an M.2 Key-M slot. The +PHY driving these differential lines is shared between the USB3.0 controller and the PCIe +Controller, thus only a single controller can use it. + +To setup for PCIe run the following commands from U-Boot then power-cycle the board: .. code-block:: none i2c dev i2c@5000 i2c mw 0x18 0x33 1 -Then power-cycle the board. - -To set back to USB3.0, run the following commands from U-Boot: +To revert to USB3.0 run the following commands from U-Boot then power-cycle the board: .. code-block:: none i2c dev i2c@5000 i2c mw 0x18 0x33 0 -Then power-cycle the board. - -U-Boot compilation +U-Boot Compilation ------------------ .. code-block:: bash @@ -54,14 +49,21 @@ U-Boot compilation $ make khadas-vim3l_defconfig $ make -Image creation --------------- +U-Boot Signing with Pre-Built FIP repo +-------------------------------------- + +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh khadas-vim3l /path/to/u-boot/u-boot.bin my-output-dir -For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim3l` +U-Boot Manual Signing +--------------------- -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: +Amlogic does not provide sources for the firmware and tools needed to create a bootloader +image so it is necessary to obtain binaries from sources published by the board vendor: .. code-block:: bash @@ -72,16 +74,14 @@ the git tree published by the board vendor: $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH $ DIR=vim3l-u-boot - $ git clone --depth 1 \ - https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ - $DIR + $ git clone --depth 1 https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 $DIR $ cd vim3l-u-boot $ make kvim3l_defconfig $ make CROSS_COMPILE=aarch64-none-elf- $ export UBOOTDIR=$PWD -Go back to mainline U-Boot source tree then : +Go back to the mainline U-Boot source tree then: .. code-block:: bash @@ -105,58 +105,58 @@ Go back to mainline U-Boot source tree then : $ cp u-boot.bin fip/bl33.bin $ bash fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 $ bash fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 + --output fip/bl30_new.bin.g12a.enc \ + --level v3 $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 + --output fip/bl31.img.enc \ + --level v3 --type bl31 $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig + --output fip/bl2.n.bin.sig $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 - -and then write the image to SD with: + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 + +Then write U-Boot to SD or eMMC with: .. code-block:: bash - $ DEV=/dev/your_sd_device + $ DEV=/dev/boot_device $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440