From: Michał Barnaś Date: Tue, 19 Mar 2024 18:18:13 +0000 (+0000) Subject: arm: socfpga: arria10: add option to reprogram the FPGA every reboot X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=2b8eabbaf2e2aa19455d880fd13af8c20f72b81f;p=u-boot.git arm: socfpga: arria10: add option to reprogram the FPGA every reboot Add Kconfig that enables FPGA reprogramming with warm boot on Arria 10. This option allows to change the bitstream on the filesystem and apply changes with warm reboot without the need for a power cycle. Signed-off-by: Michał Barnaś --- diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 1008232cac..6b6a162f56 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -90,6 +90,14 @@ config TARGET_SOCFPGA_ARRIA10 imply FPGA_SOCFPGA imply SPL_USE_TINY_PRINTF +config SOCFPGA_ARRIA10_ALWAYS_REPROGRAM + bool "Always reprogram Arria 10 FPGA" + depends on TARGET_SOCFPGA_ARRIA10 + help + Arria 10 FPGA is only programmed during the cold boot. + This option forces the FPGA to be reprogrammed every reboot, + allowing to change the bitstream and apply it with warm reboot. + config TARGET_SOCFPGA_CYCLONE5 bool select TARGET_SOCFPGA_GEN5 diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c index 9edbbf4a29..3981d2d4f1 100644 --- a/arch/arm/mach-socfpga/spl_a10.c +++ b/arch/arm/mach-socfpga/spl_a10.c @@ -122,7 +122,10 @@ void spl_board_init(void) arch_early_init_r(); /* If the full FPGA is already loaded, ie.from EPCQ, config fpga pins */ - if (is_fpgamgr_user_mode()) { + if ((IS_ENABLED(CONFIG_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM) && + is_regular_boot_valid()) || + (!IS_ENABLED(CONFIG_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM) && + is_fpgamgr_user_mode())) { ret = config_pins(gd->fdt_blob, "shared"); if (ret) return; @@ -130,7 +133,8 @@ void spl_board_init(void) ret = config_pins(gd->fdt_blob, "fpga"); if (ret) return; - } else if (!is_fpgamgr_early_user_mode()) { + } else if (IS_ENABLED(CONFIG_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM) || + !is_fpgamgr_early_user_mode()) { /* Program IOSSM(early IO release) or full FPGA */ fpgamgr_program(buf, FPGA_BUFSIZ, 0);