From: Fabio Estevam Date: Thu, 14 Feb 2019 12:01:51 +0000 (-0200) Subject: pico-imx6ul: README: Adjust the binary name after DM conversion X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=28a36fd8237132d5cbf1590a45752da7cc2e4047;p=u-boot.git pico-imx6ul: README: Adjust the binary name after DM conversion After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador --- diff --git a/board/technexion/pico-imx6ul/README b/board/technexion/pico-imx6ul/README index 1cabd90759..bb8ee3f463 100644 --- a/board/technexion/pico-imx6ul/README +++ b/board/technexion/pico-imx6ul/README @@ -13,7 +13,7 @@ $ make mrproper $ make pico-imx6ul_defconfig $ make -This generates the SPL and u-boot.img binaries. +This generates the SPL and u-boot-dtb.img binaries. 1. Loading U-Boot via USB Serial Download Protocol @@ -31,15 +31,15 @@ Connect a USB cable between the OTG pico port and the host PC. Open a terminal program such as minicom. -Copy SPL and u-boot.img to the imx_usb_loader folder. +Copy SPL and u-boot-dtb.img to the imx_usb_loader folder. Load the SPL binary via USB: $ sudo ./imx_usb SPL -Load the u-boot.img binary via USB: +Load the u-boot-dtb.img binary via USB: -$ sudo ./imx_usb u-boot.img +$ sudo ./imx_usb u-boot-dtb.img Then U-Boot starts and its messages appear in the console program. @@ -54,11 +54,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool: => dfu 0 mmc 0 -Flash SPL and u-boot.img into the eMMC running the following commands on a PC: +Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC: $ sudo dfu-util -D SPL -a spl -$ sudo dfu-util -D u-boot.img -a u-boot +$ sudo dfu-util -D u-boot-dtb.img -a u-boot Remove power from the pico board. @@ -142,7 +142,7 @@ Launch UMS: Flash the new binaries: $ sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync -$ sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=69; sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1k seek=69; sync And then SPL binary will load and jump directly to the kernel: