From: Thomas Chou Date: Mon, 7 Dec 2015 12:53:29 +0000 (+0800) Subject: net: eth_designware: select PHYLIB in Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=25af71c4bfcd54a88cc9098f23416fe9d1f7d80c;p=u-boot.git net: eth_designware: select PHYLIB in Kconfig Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB from legacy board header files. This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE are selected. Signed-off-by: Thomas Chou Reported-by: Pavel Machek Acked-by: Chin Liang See Acked-by: Pavel Machek Tested-by: Pavel Machek Reviewed-by: Bin Meng --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ae5e78dd34..de54ca8014 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW config ETH_DESIGNWARE bool "Synopsys Designware Ethernet MAC" + select PHYLIB help This MAC is present in SoCs from various vendors. It supports 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to diff --git a/drivers/net/designware.c b/drivers/net/designware.c index a6c39c39ff..3af43b41fd 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -22,10 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if !defined(CONFIG_PHYLIB) -# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB" -#endif - static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) { struct eth_mac_regs *mac_p = bus->priv; diff --git a/include/configs/axs101.h b/include/configs/axs101.h index 650d97d17f..eeb2ae6353 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -95,7 +95,6 @@ /* * Ethernet PHY configuration */ -#define CONFIG_PHYLIB #define CONFIG_MII #define CONFIG_PHY_GIGE diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 0e353b9941..b5d4847523 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -75,7 +75,6 @@ #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_CMD_MII #define CONFIG_MII -#define CONFIG_PHYLIB /* i2c Settings */ #define CONFIG_SYS_I2C diff --git a/include/configs/galileo.h b/include/configs/galileo.h index eb16a5eaca..14a42b1d40 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -45,7 +45,6 @@ /* 10/100M Ethernet support */ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR -#define CONFIG_PHYLIB /* Environment configuration */ #define CONFIG_ENV_SECT_SIZE 0x1000 diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 3a4df63ef1..1da2ecf1e1 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -109,7 +109,6 @@ #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_MII #define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ) -#define CONFIG_PHYLIB #define CONFIG_PHY_GIGE #endif diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 1d69477e61..d2630f4be1 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -17,7 +17,6 @@ /* Ethernet driver configuration */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 14c6a9edf5..f4213217bb 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -53,7 +53,6 @@ /* GMAC related configs */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHY_MICREL diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index da6ab61d1b..46f7994222 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -313,7 +313,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ #define CONFIG_PHY_ADDR 1 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_PHYLIB #endif #ifdef CONFIG_USB_EHCI_HCD diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 8660ed45e0..e06484f861 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -42,7 +42,6 @@ /* * Ethernet PHY configuration */ -#define CONFIG_PHYLIB #define CONFIG_PHY_GIGE /* diff --git a/include/configs/x600.h b/include/configs/x600.h index 58f1aca9a0..0263c50e13 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -77,7 +77,6 @@ /* Ethernet config options */ #define CONFIG_MII -#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */