From: Marek Vasut <marex@denx.de>
Date: Sat, 5 Oct 2024 01:15:48 +0000 (+0200)
Subject: ARM: dts: stm32: Duplicate cpu0-opp-table node into stm32mp15-u-boot.dtsi
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=241518cfce7701fddba17a023769d274e719e14e;p=u-boot.git

ARM: dts: stm32: Duplicate cpu0-opp-table node into stm32mp15-u-boot.dtsi

The cpu0-opp-table {} node does not exist in upstream Linux stm32mp151.dtsi
file, in order to enable conversion to OF_UPSTREAM, duplicate the node from
current U-Boot stm32mp151.dtsi into stm32mp15-u-boot.dtsi. This makes STM32
DTs buildable even with OF_UPSTREAM enabled. No functional change, since the
current U-Boot stm32mp151.dtsi already contains the cpu0-opp-table {} node,
stm32mp15-u-boot.dtsi is applied at the end, and does not bring in any new
content.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index fe56f05616..66d4c40c6a 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -56,6 +56,24 @@
 			status = "okay";
 		};
 	};
+
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		bootph-pre-ram;
+		opp-650000000 {
+			bootph-pre-ram;
+			opp-hz = /bits/ 64 <650000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0x1>;
+		};
+		opp-800000000 {
+			bootph-pre-ram;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1350000>;
+			opp-supported-hw = <0x2>;
+		};
+	};
 };
 
 &bsec {
@@ -82,14 +100,10 @@
 	bootph-all;
 };
 
-&cpu0_opp_table {
-	bootph-pre-ram;
-	opp-650000000 {
-		bootph-pre-ram;
-	};
-	opp-800000000 {
-		bootph-pre-ram;
-	};
+&cpu0 {
+	nvmem-cells = <&part_number_otp>;
+	nvmem-cell-names = "part_number";
+	operating-points-v2 = <&cpu0_opp_table>;
 };
 
 &gpioa {