From: Tom Rini Date: Sat, 11 Jun 2022 02:59:26 +0000 (-0400) Subject: ata: fsl_sata: Remove legacy non-BLK code X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=21af94f882b764353b781c8a4569961124189e0b;p=u-boot.git ata: fsl_sata: Remove legacy non-BLK code The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini --- diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c index d1bab93189..6db4247368 100644 --- a/drivers/ata/fsl_sata.c +++ b/drivers/ata/fsl_sata.c @@ -6,10 +6,13 @@ */ #include +#include #include #include #include #include +#include +#include #include #include #include @@ -21,33 +24,6 @@ #include #include "fsl_sata.h" -#if CONFIG_IS_ENABLED(BLK) -#include -#include -#include -#include -#else -#ifndef CONFIG_SYS_SATA1_FLAGS - #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#endif -#ifndef CONFIG_SYS_SATA2_FLAGS - #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA -#endif - -static struct fsl_sata_info fsl_sata_info[] = { -#ifdef CONFIG_SATA1 - {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS}, -#else - {0, 0}, -#endif -#ifdef CONFIG_SATA2 - {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS}, -#else - {0, 0}, -#endif -}; -#endif - static inline void sdelay(unsigned long sec) { unsigned long i; @@ -86,11 +62,7 @@ static int ata_wait_register(unsigned __iomem *addr, u32 mask, return (i < timeout_msec) ? 0 : -1; } -#if !CONFIG_IS_ENABLED(BLK) -int init_sata(int dev) -#else static int init_sata(struct fsl_ata_priv *priv, int dev) -#endif { u32 length, align; cmd_hdr_tbl_t *cmd_hdr; @@ -129,15 +101,9 @@ static int init_sata(struct fsl_ata_priv *priv, int dev) snprintf(sata->name, 12, "SATA%d:", dev); /* Set the controller register base address to device struct */ -#if !CONFIG_IS_ENABLED(BLK) - sata_dev_desc[dev].priv = (void *)sata; - reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base); - sata->dma_flag = fsl_sata_info[dev].flags; -#else reg = (fsl_sata_reg_t *)(priv->base + priv->offset * dev); sata->dma_flag = priv->flag; priv->fsl_sata = sata; -#endif sata->reg_base = reg; /* Allocate the command header table, 4 bytes aligned */ @@ -738,17 +704,11 @@ static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt, /* * SATA interface between low level driver and command layer */ -#if !CONFIG_IS_ENABLED(BLK) -ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) -{ - fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; -#else static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, void *buffer) { struct fsl_ata_priv *priv = dev_get_plat(dev); fsl_sata_t *sata = priv->fsl_sata; -#endif u32 rc; if (sata->lba48) @@ -760,17 +720,11 @@ static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, return rc; } -#if !CONFIG_IS_ENABLED(BLK) -ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) -{ - fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; -#else static ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, const void *buffer) { struct fsl_ata_priv *priv = dev_get_plat(dev); fsl_sata_t *sata = priv->fsl_sata; -#endif u32 rc; if (sata->lba48) { @@ -801,17 +755,11 @@ static void fsl_sata_identify(fsl_sata_t *sata, u16 *id) ata_swap_buf_le16(id, ATA_ID_WORDS); } -#if !CONFIG_IS_ENABLED(BLK) -int scan_sata(int dev) -{ - fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; -#else static int scan_sata(struct udevice *dev) { struct blk_desc *desc = dev_get_uclass_plat(dev); struct fsl_ata_priv *priv = dev_get_plat(dev); fsl_sata_t *sata = priv->fsl_sata; -#endif unsigned char serial[ATA_ID_SERNO_LEN + 1]; unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; @@ -853,22 +801,12 @@ static int scan_sata(struct udevice *dev) debug("Device supports LBA28\n\r"); #endif -#if !CONFIG_IS_ENABLED(BLK) - memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); - memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); - memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); - sata_dev_desc[dev].lba = (u32)n_sectors; -#ifdef CONFIG_LBA48 - sata_dev_desc[dev].lba48 = sata->lba48; -#endif -#else memcpy(desc->product, serial, sizeof(serial)); memcpy(desc->revision, firmware, sizeof(firmware)); memcpy(desc->vendor, product, sizeof(product)); desc->lba = n_sectors; #ifdef CONFIG_LBA48 desc->lba48 = sata->lba48; -#endif #endif /* Get the NCQ queue depth from device */ @@ -890,7 +828,6 @@ static int scan_sata(struct udevice *dev) return 0; } -#if CONFIG_IS_ENABLED(BLK) static const struct blk_ops sata_fsl_blk_ops = { .read = sata_read, .write = sata_write, @@ -1042,4 +979,3 @@ U_BOOT_DRIVER(fsl_ahci) = { .remove = fsl_ata_remove, .priv_auto = sizeof(struct fsl_ata_priv), }; -#endif diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h index 5b9daa79e0..e1ea8eb3a1 100644 --- a/drivers/ata/fsl_sata.h +++ b/drivers/ata/fsl_sata.h @@ -319,7 +319,6 @@ typedef struct fsl_sata { #define READ_CMD 0 #define WRITE_CMD 1 -#if CONFIG_IS_ENABLED(BLK) struct fsl_ata_priv { u32 base; u32 flag; @@ -327,6 +326,5 @@ struct fsl_ata_priv { u32 offset; fsl_sata_t *fsl_sata; }; -#endif #endif /* __FSL_SATA_H__ */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 4995bcee85..de197a0bd1 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -265,15 +265,6 @@ /* * SATA */ -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1_OFFSET 0x18000 -#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2_OFFSET 0x19000 -#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #ifdef CONFIG_FSL_SATA #define CONFIG_LBA48 #endif diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d5b8cfaea3..15add282d7 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -476,13 +476,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif /* #ifdef CONFIG_FSL_SATA */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 38acb38690..8a7123921b 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -340,13 +340,6 @@ #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index bb05b2ed7c..e7ebf79545 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -393,10 +393,6 @@ /* SATA */ #define CONFIG_FSL_SATA_V2 #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index e46488b3c0..06be25bf5a 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -462,12 +462,6 @@ * SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA #define CONFIG_LBA48 #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index d4bf938ac6..f96208d265 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -418,12 +418,6 @@ * SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA #define CONFIG_LBA48 #endif diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index ebdd47edf9..542786aeef 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -155,13 +155,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif @@ -435,13 +428,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 56b56e8a2e..6006f76382 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -339,13 +339,6 @@ /* SATA */ #ifdef CONFIG_FSL_SATA_V2 -#define CONFIG_SATA1 -#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR -#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA -#define CONFIG_SATA2 -#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR -#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA - #define CONFIG_LBA48 #endif diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 35363ccda1..52703632a7 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -60,7 +60,6 @@ /* SATA */ -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 #ifndef SPL_NO_ENV #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 91223789b8..665723b151 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -53,7 +53,6 @@ #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 /* Initial environment variables */ #ifndef SPL_NO_ENV diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 9a29bb6ca1..ff85f1eb4a 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -115,11 +115,6 @@ unsigned long long get_qixis_addr(void); /* Miscellaneous configurable options */ -/* SATA */ -#ifdef CONFIG_SCSI -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#endif - /* Physical Memory Map */ #define CONFIG_HWCONFIG diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 9ce48a0960..f2eae07381 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -29,11 +29,6 @@ #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif -/* SATA */ - -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 - #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index cdfc9fd82e..43bcc5a9b1 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -34,11 +34,6 @@ #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif -/* SATA */ - -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 - #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT) #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 56096682c0..f8c3a0923a 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -95,13 +95,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -/* SATA */ - -#ifdef CONFIG_SCSI -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#define CONFIG_SYS_SATA2 AHCI_BASE_ADDR2 -#endif - /* USB */ #ifdef CONFIG_USB_HOST #ifndef CONFIG_TARGET_LX2162AQDS