From: Fabio Estevam Date: Thu, 18 Feb 2021 02:39:28 +0000 (-0300) Subject: mx28evk: Convert to driver model X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=1d1f3c809973ce8b107b43cab0bec946251b1d3c;p=u-boot.git mx28evk: Convert to driver model Make the conversion to driver model as it is mandatory. Successfully tested booting Linux from the SD card. Dropped support for networking and splash screen as these need to be properly converted to DM and tested. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index bec349f17e..e62f7fc1c5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -680,6 +680,7 @@ dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \ imx23-olinuxino.dtb dtb-$(CONFIG_MX28) += \ + imx28-evk.dtb \ imx28-xea.dtb dtb-$(CONFIG_MX51) += \ diff --git a/arch/arm/dts/imx28-evk-u-boot.dtsi b/arch/arm/dts/imx28-evk-u-boot.dtsi new file mode 100644 index 0000000000..6adbae68d2 --- /dev/null +++ b/arch/arm/dts/imx28-evk-u-boot.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ + +#include "imx28-u-boot.dtsi" + diff --git a/board/freescale/mx28evk/MAINTAINERS b/board/freescale/mx28evk/MAINTAINERS index 597118d3f6..c565010ccf 100644 --- a/board/freescale/mx28evk/MAINTAINERS +++ b/board/freescale/mx28evk/MAINTAINERS @@ -2,6 +2,7 @@ MX28EVK BOARD M: Fabio Estevam S: Maintained F: board/freescale/mx28evk/ +F: arch/arm/dts/imx28-evk.dts F: include/configs/mx28evk.h F: configs/mx28evk_defconfig F: configs/mx28evk_auart_console_defconfig diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 21c9cb1128..88c3bf3608 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -72,80 +72,3 @@ int board_init(void) return 0; } - -#ifdef CONFIG_CMD_MMC -static int mx28evk_mmc_wp(int id) -{ - if (id != 0) { - printf("MXS MMC: Invalid card selected (card id = %d)\n", id); - return 1; - } - - return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12); -} - -int board_mmc_init(struct bd_info *bis) -{ - /* Configure WP as input */ - gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12); - - /* Configure MMC0 Power Enable */ - gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); - - return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL); -} -#endif - -#ifdef CONFIG_CMD_NET - -int board_eth_init(struct bd_info *bis) -{ - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; - struct eth_device *dev; - int ret; - - ret = cpu_eth_init(bis); - if (ret) - return ret; - - /* MX28EVK uses ENET_CLK PAD to drive FEC clock */ - writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN, - &clkctrl_regs->hw_clkctrl_enet); - - /* Power-on FECs */ - gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0); - - /* Reset FEC PHYs */ - gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0); - udelay(200); - gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1); - - ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); - if (ret) { - puts("FEC MXS: Unable to init FEC0\n"); - return ret; - } - - ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE); - if (ret) { - puts("FEC MXS: Unable to init FEC1\n"); - return ret; - } - - dev = eth_get_dev_by_name("FEC0"); - if (!dev) { - puts("FEC MXS: Unable to get FEC0 device entry\n"); - return -EINVAL; - } - - dev = eth_get_dev_by_name("FEC1"); - if (!dev) { - puts("FEC MXS: Unable to get FEC1 device entry\n"); - return -EINVAL; - } - - return ret; -} - -#endif diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 300ab08c82..3345ec611a 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -7,10 +7,12 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x40000 +CONFIG_DM_GPIO=y CONFIG_SPL_TEXT_BASE=0x00001000 CONFIG_TARGET_MX28EVK=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="imx28-evk" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -18,13 +20,11 @@ CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT4=y @@ -35,18 +35,28 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)" CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_SPL_DM=y CONFIG_MXS_GPIO=y +CONFIG_DM_MMC=y CONFIG_MMC_MXS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_MXS=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MXS=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_CONS_INDEX=0 CONFIG_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_SPLASH_SCREEN=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index a65df48608..21f3277d5c 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -31,13 +31,6 @@ /* UBI and NAND partitioning */ -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE -#define CONFIG_MX28_FEC_MAC_IN_OCOTP -#endif - /* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MXS