From: Patrick Delaunay <patrick.delaunay@foss.st.com>
Date: Mon, 31 Jan 2022 15:07:54 +0000 (+0100)
Subject: arm: dts: stm32mp15: alignment with v5.17
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=182738fe2f65b6b7faab70d883ad1ab435c6a8b5;p=u-boot.git

arm: dts: stm32mp15: alignment with v5.17

Device tree alignment with Linux kernel v5.17-rc1
- ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins
  on STM32MP15 DKx boards
- ARM: dts: stm32: clean uart4_idle_pins_a node for stm32mp15
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp15xx-dkx
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp157c-ev1
- ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---

diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index d3553e0f01..6161f5906e 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1718,7 +1718,7 @@
 
 	stusb1600_pins_a: stusb1600-0 {
 		pins {
-			pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
 			bias-pull-up;
 		};
 	};
@@ -1737,20 +1737,20 @@
 	};
 
 	uart4_idle_pins_a: uart4-idle-0 {
-		   pins1 {
-			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
-		   };
-		   pins2 {
-			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			 bias-disable;
-		   };
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
 	};
 
 	uart4_sleep_pins_a: uart4-sleep-0 {
-		   pins {
+		pins {
 			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
 				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-		    };
+		};
 	};
 
 	uart4_pins_b: uart4-1 {
@@ -1816,7 +1816,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1826,7 +1826,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1971,7 +1971,7 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1988,7 +1988,7 @@
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -2012,7 +2012,7 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -2029,7 +2029,7 @@
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index 5c5b1ddf7b..e222d2d2cb 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -375,3 +375,25 @@
 &usbphyc {
 	status = "okay";
 };
+
+&usbphyc_port0 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 5502eec94b..f8130bf445 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -702,10 +702,26 @@
 
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &vrefbuf {