From: Tom Rini Date: Sun, 31 Oct 2021 03:03:56 +0000 (-0400) Subject: Convert CONFIG_SPL_DRIVERS_MISC et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=1616626417716e988362c908125ba574c402f831;p=u-boot.git Convert CONFIG_SPL_DRIVERS_MISC et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini --- diff --git a/README b/README index 420513f1bf..0f52888171 100644 --- a/README +++ b/README @@ -1941,9 +1941,6 @@ The following options need to be configured: CONFIG_SPL Enable building of SPL globally. - CONFIG_SPL_LDSCRIPT - LDSCRIPT for linking the SPL binary. - CONFIG_SPL_MAX_FOOTPRINT Maximum size in memory allocated to the SPL, BSS included. When defined, the linker checks that the actual memory @@ -1998,10 +1995,6 @@ The following options need to be configured: CONFIG_SYS_SPL_MALLOC_SIZE The size of the malloc pool used in SPL. - CONFIG_SPL_OS_BOOT - Enable booting directly to an OS from SPL. - See also: doc/README.falcon - CONFIG_SPL_DISPLAY_PRINT For ARM, enable an optional function to print more information about the running system. diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index 4c8a5f31fc..e81859a23c 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -3,6 +3,9 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_CPU_INIT=y CONFIG_ARCH_MVEBU=y CONFIG_SYS_TEXT_BASE=0x00800000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=2 @@ -30,6 +33,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_LAST_STAGE_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_I2C=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_GO is not set diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index 0b994e0cfa..3076dced10 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -23,6 +23,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_BOOTDELAY=3 CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index a86aee2dff..71759d81a3 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -11,6 +11,7 @@ CONFIG_MX6QDL=y CONFIG_TARGET_MX6DL_MAMOJ=y CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_DRIVERS_MISC=y CONFIG_IMX_HAB=y # CONFIG_CMD_BMODE is not set CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 67b1b18128..439917bf24 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -24,6 +24,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 681843ee5b..42128c515a 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -14,6 +14,7 @@ CONFIG_MX6QDL=y CONFIG_TARGET_MX6Q_ENGICAM=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-mipi" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0x021f0000 @@ -29,6 +30,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 34bb85f0ea..61d8a7b2e6 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -14,6 +14,7 @@ CONFIG_MX6QDL=y CONFIG_TARGET_MX6Q_ENGICAM=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x020D8024 @@ -32,6 +33,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 67b1b18128..439917bf24 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -24,6 +24,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index b0b057c002..697644b4cb 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -14,6 +14,7 @@ CONFIG_MX6QDL=y CONFIG_TARGET_MX6Q_ENGICAM=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-rqs" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y @@ -26,6 +27,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index 21fa8a3791..27cfa7ff30 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -14,6 +14,7 @@ CONFIG_MX6UL=y CONFIG_TARGET_MX6UL_ENGICAM=y CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y @@ -24,6 +25,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="geam6ul> " diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index 94952c8f04..3863b8a88f 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -24,6 +24,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="geam6ul> " diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index 944ceafd50..256d7329bb 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -14,6 +14,7 @@ CONFIG_MX6UL=y CONFIG_TARGET_MX6UL_ENGICAM=y CONFIG_DEFAULT_DEVICE_TREE="imx6ul-isiot-emmc" CONFIG_SPL_TEXT_BASE=0x00908000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SPL_LIBDISK_SUPPORT=y @@ -24,6 +25,7 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="isiotmx6ul> " diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index 6173e2078b..f1c97e57bd 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -24,6 +24,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_SPL_DMA=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="isiotmx6ul> " diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 2dc5b6c8c6..b0af4122df 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -2,6 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_IMX8M=y CONFIG_SYS_TEXT_BASE=0x40200000 CONFIG_SYS_MALLOC_LEN=0x600000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x400000 CONFIG_SYS_I2C_MXC_I2C1=y @@ -11,7 +14,9 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx8mq-evk" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_IMX8MQ_EVK=y +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x40480000 @@ -22,6 +27,9 @@ CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index 062d2a4d37..602509c382 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -2,6 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_IMX8M=y CONFIG_SYS_TEXT_BASE=0x40200000 CONFIG_SYS_MALLOC_LEN=0x600000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x400000 @@ -12,7 +15,9 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx8mq-phanbell" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_IMX8MQ_PHANBELL=y +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y @@ -22,6 +27,8 @@ CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_SD_BOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index c8dde551ea..8456e98e8e 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AIOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_SYS_MALLOC_LEN=0x1002000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 @@ -11,6 +13,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart" CONFIG_SPL_TEXT_BASE=0x10000000 +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_AHCI=y @@ -25,7 +28,10 @@ CONFIG_ID_EEPROM=y CONFIG_SPL_FSL_PBL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_WATCHDOG=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 0f640de7b9..58a8a91d2b 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_TARGET_LS1046AQDS=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_SYS_MALLOC_LEN=0x102000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff @@ -17,6 +19,7 @@ CONFIG_SPL_TEXT_BASE=0x10000000 CONFIG_FSL_USE_PCA9547_MUX=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y @@ -35,7 +38,11 @@ CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_WATCHDOG=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index b6b044e020..179a945fe3 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SYS_MALLOC_LEN=0xa00000 CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 51ea533412..5ff3f23727 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SYS_MALLOC_LEN=0xa00000 CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index 7fc7cc66ef..8a77aa4641 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -19,6 +19,7 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig index 8808f20d45..ba468adb9f 100644 --- a/configs/mx23evk_defconfig +++ b/configs/mx23evk_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index 9346efb699..d57db5f1a7 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index fa73fa2a22..4e6426b124 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index 17f5ba45a4..2f708de5a0 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index 9ccc30d42a..424ebcfb25 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index e63b1192ad..0e898365b4 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -2,6 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_IMX8M=y CONFIG_SYS_TEXT_BASE=0x40200000 CONFIG_SYS_MALLOC_LEN=0x600000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x400000 CONFIG_SYS_I2C_MXC_I2C1=y @@ -11,7 +14,9 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx8mq-pico-pi" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_PICO_IMX8MQ=y +CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_FIT=y @@ -21,6 +26,9 @@ CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 752987f11c..84d28c7bfc 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -21,6 +21,7 @@ CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 +CONFIG_SPL_OS_BOOT=y CONFIG_CMD_SPL=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index cb0c0a1581..df9eae1691 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -480,7 +480,7 @@ comment "Generic NAND options" config SYS_NAND_BLOCK_SIZE hex "NAND chip eraseblock size" depends on ARCH_SUNXI || SPL_NAND_SUPPORT || TPL_NAND_SUPPORT - depends on !NAND_MXS_DT && !NAND_DENALI_DT && !NAND_LPC32XX_MLC + depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC && !NAND_FSL_IFC help Number of data bytes in one eraseblock for the NAND chip on the board. This is the multiple of NAND_PAGE_SIZE and the number of @@ -505,7 +505,7 @@ config SYS_NAND_PAGE_SIZE depends on ARCH_SUNXI || NAND_OMAP_GPMC || NAND_LPC32XX_SLC || \ SPL_NAND_SIMPLE || (NAND_MXC && SPL_NAND_SUPPORT) || \ (NAND_ATMEL && SPL_NAND_SUPPORT) || SPL_GENERATE_ATMEL_PMECC_HEADER - depends on !NAND_MXS_DT && !NAND_DENALI_DT && !NAND_LPC32XX_MLC + depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC help Number of data bytes in one page for the NAND chip on the board, not including the OOB area. @@ -515,7 +515,7 @@ config SYS_NAND_OOBSIZE depends on ARCH_SUNXI || NAND_OMAP_GPMC || NAND_LPC32XX_SLC || \ SPL_NAND_SIMPLE || (NAND_MXC && SPL_NAND_SUPPORT) || \ (NAND_ATMEL && SPL_NAND_SUPPORT) || SPL_GENERATE_ATMEL_PMECC_HEADER - depends on !NAND_MXS_DT && !NAND_DENALI_DT && !NAND_LPC32XX_MLC + depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC help Number of bytes in the Out-Of-Band area for the NAND chip on the board. diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 59e827e320..58ab1b7dee 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 11b186a3ab..7ddd731a53 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -12,13 +12,11 @@ #include #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_TEXT_BASE 0x0 #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 21e61e5e8f..5120c7b377 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -72,13 +72,8 @@ #define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_I2C - #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ -#define CONFIG_SPL_MMC #ifdef CONFIG_SPL_BUILD #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ #endif diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 238d61549c..fed6545fdf 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -162,12 +162,6 @@ /* SPL */ #ifdef CONFIG_SPL -# ifdef CONFIG_ENV_IS_IN_NAND -# define CONFIG_SPL_NAND_SUPPORT -# else -# define CONFIG_SPL_MMC -# endif - # include "imx6_spl.h" #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 2427603d00..1c636d94f6 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -20,7 +20,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x960000 #define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 #define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index dd768eb086..53fbeffb45 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -19,16 +19,7 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_WATCHDOG -#define CONFIG_SPL_DRIVERS_MISC -#define CONFIG_SPL_POWER -#define CONFIG_SPL_I2C -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO -#define CONFIG_SPL_MMC #define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index e6575da474..d17f70fc4b 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -16,16 +16,7 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_WATCHDOG -#define CONFIG_SPL_DRIVERS_MISC -#define CONFIG_SPL_POWER -#define CONFIG_SPL_I2C -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO -#define CONFIG_SPL_MMC #define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index d3c3e580ac..11b5c16e37 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 3b1f957364..f59a9ef5e2 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 #define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 8e9a159e9b..919eb5fff2 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x22050000 #define CONFIG_SPL_BSS_START_ADDR 0x22048000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ @@ -27,8 +26,6 @@ #define CONFIG_MALLOC_F_ADDR 0x22040000 -#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x95000000 /* SPL_RAM needed */ - #define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 7a7640a49c..f73dafef05 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -48,12 +48,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_I2C -#define CONFIG_SPL_WATCHDOG -#define CONFIG_SPL_MMC #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 #define CONFIG_SPL_MAX_SIZE 0x1a000 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index f199c94ed1..7822e9d9fa 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -95,14 +95,7 @@ /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PBL_PAD -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_WATCHDOG -#define CONFIG_SPL_I2C - -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_DRIVERS_MISC + #define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */ #define CONFIG_SPL_STACK 0x1001f000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 9ae0b8e0ae..c816ee16f2 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -204,7 +204,6 @@ unsigned long long get_qixis_addr(void); #ifdef CONFIG_SPL #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 0x16000 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index a0803227c8..11b9ceb547 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -9,7 +9,6 @@ #include "mx6_common.h" -#define CONFIG_SPL_LIBCOMMON_SUPPORT #include "imx6_spl.h" #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 5c0b729ccd..983402f7df 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -39,8 +39,4 @@ /* MMC */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_DRIVERS_MISC -#endif - #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index eeb535efa1..32b44fe924 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -38,10 +38,6 @@ #define CONFIG_ARMV7_SECURE_BASE 0x00900000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_DRIVERS_MISC -#endif - /* * If we have defined the OPTEE ram size and not OPTEE it means that we were * launched by OPTEE, because of that we shall skip all the low level diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 51624a27c4..591c572184 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -45,7 +45,6 @@ /* SPL */ #ifndef CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NO_CPU_SUPPORT #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" #endif diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 874c94e01f..356544a672 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -20,7 +20,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x960000 #define CONFIG_SPL_BSS_START_ADDR 0x98FC00 #define CONFIG_SPL_BSS_MAX_SIZE SZ_1K diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f8805a12e4..2afcf0059d 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -16,16 +16,7 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_WATCHDOG -#define CONFIG_SPL_DRIVERS_MISC -#define CONFIG_SPL_POWER -#define CONFIG_SPL_I2C -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO -#define CONFIG_SPL_MMC #define CONFIG_SPL_BSS_START_ADDR 0x00180000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h index 09ebf48860..e611e7b510 100644 --- a/include/configs/sama5d27_wlsom1_ek.h +++ b/include/configs/sama5d27_wlsom1_ek.h @@ -27,7 +27,6 @@ #endif /* SPL */ -#define CONFIG_SPL_TEXT_BASE 0x200000 #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 2538287e4c..f43304d844 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -137,8 +137,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_INIT_SP_ADDR 0x301000 -#define CONFIG_SPL_STACK_R -#define CONFIG_SPL_STACK_R_ADDR CONFIG_SYS_TEXT_BASE #else /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index c576d65efa..7260eb72a4 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -48,7 +48,6 @@ /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here * since it needs to fit in with the other values. By also #defining it * we get warnings if the Kconfig value mismatches. */ -#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 #else #define SDRAM_OFFSET(x) 0x4##x @@ -57,7 +56,6 @@ /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here * since it needs to fit in with the other values. By also #defining it * we get warnings if the Kconfig value mismatches. */ -#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 #endif diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 18179e9b7e..cbb5c6dea0 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -22,9 +22,6 @@ #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -/* No falcon support */ -#undef CONFIG_SPL_OS_BOOT - /* FPGA commands that we don't use */ /* Extras */ diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h index 3dc10b29c3..87259258f7 100644 --- a/include/configs/vyasa-rk3288.h +++ b/include/configs/vyasa-rk3288.h @@ -21,9 +21,6 @@ func(MMC, mmc, 1) \ #ifndef CONFIG_TPL_BUILD - -#define CONFIG_SPL_OS_BOOT - /* Falcon Mode */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index f8607b7617..e214805787 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -251,7 +251,6 @@ #endif #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) -# define CONFIG_SPL_ENV_SUPPORT # define CONFIG_SPL_HASH # define CONFIG_ENV_MAX_ENTRIES 10 #endif