From: Simon Glass Date: Sat, 12 Mar 2016 05:07:14 +0000 (-0700) Subject: x86: gpio: Allow the pinctrl driver to set up the pin config X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=15cf75ec15db3dd7f72fff340a5986dca5f9ad45;p=u-boot.git x86: gpio: Allow the pinctrl driver to set up the pin config Rather than setting up the pin configuration in the GPIO driver, use the new pinctrl driver to do it. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 16c867041f..dfafb0bbf2 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -20,6 +20,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CPU=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_GIGADEVICE=y diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index 09306bbd30..71028cf276 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -8,6 +8,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_OF_CONTROL=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_PCI=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 0b8e3dd118..b4e1876880 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -18,6 +18,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CPU=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_GIGADEVICE=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 1a9edb51ad..832ac4df58 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -14,6 +14,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_GIGADEVICE=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index fedd511cca..ea39e6af42 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -20,6 +20,8 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CPU=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_GIGADEVICE=y diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c index c81d0332c4..ae999aff4b 100644 --- a/drivers/gpio/intel_ich6_gpio.c +++ b/drivers/gpio/intel_ich6_gpio.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include #include @@ -51,12 +53,6 @@ struct ich6_bank_priv { #define GPIO_IOSEL_OFFSET(x) (x + 4) #define GPIO_LVL_OFFSET(x) (x + 8) -#define IOPAD_MODE_MASK 0x7 -#define IOPAD_PULL_ASSIGN_SHIFT 7 -#define IOPAD_PULL_ASSIGN_MASK (0x3 << IOPAD_PULL_ASSIGN_SHIFT) -#define IOPAD_PULL_STRENGTH_SHIFT 9 -#define IOPAD_PULL_STRENGTH_MASK (0x3 << IOPAD_PULL_STRENGTH_SHIFT) - /* TODO: Move this to device tree, or platform data */ void ich_gpio_set_gpio_map(const struct pch_gpio_map *map) { @@ -77,23 +73,6 @@ static int _ich6_gpio_set_value(uint16_t base, unsigned offset, int value) return 0; } -static int _ich6_gpio_set_function(uint16_t base, unsigned offset, int func) -{ - u32 val; - - if (func) { - val = inl(base); - val |= (1UL << offset); - outl(val, base); - } else { - val = inl(base); - val &= ~(1UL << offset); - outl(val, base); - } - - return 0; -} - static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir) { u32 val; @@ -111,155 +90,8 @@ static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir) return 0; } -static int _gpio_ich6_pinctrl_cfg_pin(s32 gpiobase, s32 iobase, int pin_node) -{ - u32 gpio_offset[2]; - int pad_offset; - int val; - int ret; - const void *prop; - - /* - * GPIO node is not mandatory, so we only do the - * pinmuxing if the node exist. - */ - ret = fdtdec_get_int_array(gd->fdt_blob, pin_node, "gpio-offset", - gpio_offset, 2); - if (!ret) { - /* Do we want to force the GPIO mode? */ - prop = fdt_getprop(gd->fdt_blob, pin_node, "mode-gpio", - NULL); - if (prop) - _ich6_gpio_set_function(GPIO_USESEL_OFFSET - (gpiobase) + - gpio_offset[0], - gpio_offset[1], 1); - - val = - fdtdec_get_int(gd->fdt_blob, pin_node, "direction", -1); - if (val != -1) - _ich6_gpio_set_direction(GPIO_IOSEL_OFFSET - (gpiobase) + - gpio_offset[0], - gpio_offset[1], val); - - val = - fdtdec_get_int(gd->fdt_blob, pin_node, "output-value", -1); - if (val != -1) - _ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase) - + gpio_offset[0], - gpio_offset[1], val); - } - - /* if iobase is present, let's configure the pad */ - if (iobase != -1) { - int iobase_addr; - - /* - * The offset for the same pin for the IOBASE and GPIOBASE are - * different, so instead of maintaining a lookup table, - * the device tree should provide directly the correct - * value for both mapping. - */ - pad_offset = - fdtdec_get_int(gd->fdt_blob, pin_node, "pad-offset", -1); - if (pad_offset == -1) { - debug("%s: Invalid register io offset %d\n", - __func__, pad_offset); - return -EINVAL; - } - - /* compute the absolute pad address */ - iobase_addr = iobase + pad_offset; - - /* - * Do we need to set a specific function mode? - * If someone put also 'mode-gpio', this option will - * be just ignored by the controller - */ - val = fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1); - if (val != -1) - clrsetbits_le32(iobase_addr, IOPAD_MODE_MASK, val); - - /* Configure the pull-up/down if needed */ - val = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1); - if (val != -1) - clrsetbits_le32(iobase_addr, - IOPAD_PULL_ASSIGN_MASK, - val << IOPAD_PULL_ASSIGN_SHIFT); - - val = - fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1); - if (val != -1) - clrsetbits_le32(iobase_addr, - IOPAD_PULL_STRENGTH_MASK, - val << IOPAD_PULL_STRENGTH_SHIFT); - - debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset, - readl(iobase_addr)); - } - - return 0; -} - int gpio_ich6_pinctrl_init(void) { - struct udevice *pch; - int pin_node; - int node; - int ret; - u32 gpiobase; - u32 iobase = -1; - - ret = uclass_first_device(UCLASS_PCH, &pch); - if (ret) - return ret; - if (!pch) - return -ENODEV; - - /* - * Get the memory/io base address to configure every pins. - * IOBASE is used to configure the mode/pads - * GPIOBASE is used to configure the direction and default value - */ - ret = pch_get_gpio_base(pch, &gpiobase); - if (ret) { - debug("%s: invalid GPIOBASE address (%08x)\n", __func__, - gpiobase); - return -EINVAL; - } - - /* This is not an error to not have a pinctrl node */ - node = - fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_INTEL_X86_PINCTRL); - if (node <= 0) { - debug("%s: no pinctrl node\n", __func__); - return 0; - } - - /* - * Get the IOBASE, this is not mandatory as this is not - * supported by all the CPU - */ - ret = pch_get_io_base(pch, &iobase); - if (ret && ret != -ENOSYS) { - debug("%s: invalid IOBASE address (%08x)\n", __func__, - iobase); - return -EINVAL; - } - - for (pin_node = fdt_first_subnode(gd->fdt_blob, node); - pin_node > 0; - pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) { - /* Configure the pin */ - ret = _gpio_ich6_pinctrl_cfg_pin(gpiobase, iobase, pin_node); - if (ret != 0) { - debug("%s: invalid configuration for the pin %d\n", - __func__, pin_node); - return ret; - } - } - return 0; } @@ -292,12 +124,10 @@ static int ich6_gpio_probe(struct udevice *dev) struct ich6_bank_platdata *plat = dev_get_platdata(dev); struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); struct ich6_bank_priv *bank = dev_get_priv(dev); + struct udevice *pinctrl; - if (gd->arch.gpio_map) { - setup_pch_gpios(plat->base_addr - plat->offset, - gd->arch.gpio_map); - gd->arch.gpio_map = NULL; - } + /* Set up pin control if available */ + syscon_get_by_driver_data(X86_SYSCON_PINCONF, &pinctrl); uc_priv->gpio_count = GPIO_PER_BANK; uc_priv->bank_name = plat->bank_name;