From: Masahiro Yamada Date: Fri, 8 Jan 2016 16:51:14 +0000 (+0900) Subject: ARM: uniphier: add DRAM init code for ProXstream2/PH1-LD6b X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=15607d0d94d5ca124ab3960444fc9efc10c0138c;p=u-boot.git ARM: uniphier: add DRAM init code for ProXstream2/PH1-LD6b As mentioned in the log of commit 019df879a93e2 (ARM: uniphier: add ProXstream2 and PH1-LD6b support), the DRAM init code was missing for a long time. Finally, here it is. SPL works now. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile index 99e9c86d5b..4e7f122707 100644 --- a/arch/arm/mach-uniphier/dram/Makefile +++ b/arch/arm/mach-uniphier/dram/Makefile @@ -8,5 +8,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o \ ddrphy-training.o ddrphy-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o \ ddrphy-training.o ddrphy-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += umc-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += umc-proxstream2.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o diff --git a/arch/arm/mach-uniphier/dram/ddrmphy-regs.h b/arch/arm/mach-uniphier/dram/ddrmphy-regs.h new file mode 100644 index 0000000000..569504d657 --- /dev/null +++ b/arch/arm/mach-uniphier/dram/ddrmphy-regs.h @@ -0,0 +1,146 @@ +/* + * UniPhier DDR MultiPHY registers + * + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_DDRMPHY_REGS_H +#define ARCH_DDRMPHY_REGS_H + +#include + +#define DMPHY_SHIFT 2 + +#define DMPHY_RIDR (0x000 << DMPHY_SHIFT) +#define DMPHY_PIR (0x001 << DMPHY_SHIFT) +#define DMPHY_PIR_INIT BIT(0) /* Initialization Trigger */ +#define DMPHY_PIR_ZCAL BIT(1) /* Impedance Calibration */ +#define DMPHY_PIR_PLLINIT BIT(4) /* PLL Initialization */ +#define DMPHY_PIR_DCAL BIT(5) /* DDL Calibration */ +#define DMPHY_PIR_PHYRST BIT(6) /* PHY Reset */ +#define DMPHY_PIR_DRAMRST BIT(7) /* DRAM Reset */ +#define DMPHY_PIR_DRAMINIT BIT(8) /* DRAM Initialization */ +#define DMPHY_PIR_WL BIT(9) /* Write Leveling */ +#define DMPHY_PIR_QSGATE BIT(10) /* Read DQS Gate Training */ +#define DMPHY_PIR_WLADJ BIT(11) /* Write Leveling Adjust */ +#define DMPHY_PIR_RDDSKW BIT(12) /* Read Data Bit Deskew */ +#define DMPHY_PIR_WRDSKW BIT(13) /* Write Data Bit Deskew */ +#define DMPHY_PIR_RDEYE BIT(14) /* Read Data Eye Training */ +#define DMPHY_PIR_WREYE BIT(15) /* Write Data Eye Training */ +#define DMPHY_PIR_ZCALBYP BIT(30) /* Impedance Calib Bypass */ +#define DMPHY_PIR_INITBYP BIT(31) /* Initialization Bypass */ +#define DMPHY_PGCR0 (0x002 << DMPHY_SHIFT) +#define DMPHY_PGCR0_PHYFRST BIT(26) /* PHY FIFO Reset */ +#define DMPHY_PGCR1 (0x003 << DMPHY_SHIFT) +#define DMPHY_PGCR1_INHVT BIT(26) /* VT Calculation Inhibit */ +#define DMPHY_PGCR2 (0x004 << DMPHY_SHIFT) +#define DMPHY_PGCR2_DUALCHN BIT(28) /* Dual Channel Configuration*/ +#define DMPHY_PGCR2_ACPDDC BIT(29) /* AC Power-Down with Dual Ch*/ +#define DMPHY_PGCR3 (0x005 << DMPHY_SHIFT) +#define DMPHY_PGSR0 (0x006 << DMPHY_SHIFT) +#define DMPHY_PGSR0_IDONE BIT(0) /* Initialization Done */ +#define DMPHY_PGSR0_PLDONE BIT(1) /* PLL Lock Done */ +#define DMPHY_PGSR0_DCDONE BIT(2) /* DDL Calibration Done */ +#define DMPHY_PGSR0_ZCDONE BIT(3) /* Impedance Calibration Done */ +#define DMPHY_PGSR0_DIDONE BIT(4) /* DRAM Initialization Done */ +#define DMPHY_PGSR0_WLDONE BIT(5) /* Write Leveling Done */ +#define DMPHY_PGSR0_QSGDONE BIT(6) /* DQS Gate Training Done */ +#define DMPHY_PGSR0_WLADONE BIT(7) /* Write Leveling Adjust Done */ +#define DMPHY_PGSR0_RDDONE BIT(8) /* Read Bit Deskew Done */ +#define DMPHY_PGSR0_WDDONE BIT(9) /* Write Bit Deskew Done */ +#define DMPHY_PGSR0_REDONE BIT(10) /* Read Eye Training Done */ +#define DMPHY_PGSR0_WEDONE BIT(11) /* Write Eye Training Done */ +#define DMPHY_PGSR0_ZCERR BIT(20) /* Impedance Calib Error */ +#define DMPHY_PGSR0_WLERR BIT(21) /* Write Leveling Error */ +#define DMPHY_PGSR0_QSGERR BIT(22) /* DQS Gate Training Error */ +#define DMPHY_PGSR0_WLAERR BIT(23) /* Write Leveling Adj Error */ +#define DMPHY_PGSR0_RDERR BIT(24) /* Read Bit Deskew Error */ +#define DMPHY_PGSR0_WDERR BIT(25) /* Write Bit Deskew Error */ +#define DMPHY_PGSR0_REERR BIT(26) /* Read Eye Training Error */ +#define DMPHY_PGSR0_WEERR BIT(27) /* Write Eye Training Error */ +#define DMPHY_PGSR1 (0x007 << DMPHY_SHIFT) +#define DMPHY_PGSR1_VTSTOP BIT(30) /* VT Stop */ +#define DMPHY_PLLCR (0x008 << DMPHY_SHIFT) +#define DMPHY_PTR0 (0x009 << DMPHY_SHIFT) +#define DMPHY_PTR1 (0x00A << DMPHY_SHIFT) +#define DMPHY_PTR2 (0x00B << DMPHY_SHIFT) +#define DMPHY_PTR3 (0x00C << DMPHY_SHIFT) +#define DMPHY_PTR4 (0x00D << DMPHY_SHIFT) +#define DMPHY_ACMDLR (0x00E << DMPHY_SHIFT) +#define DMPHY_ACLCDLR (0x00F << DMPHY_SHIFT) +#define DMPHY_ACBDLR0 (0x010 << DMPHY_SHIFT) +#define DMPHY_ACBDLR1 (0x011 << DMPHY_SHIFT) +#define DMPHY_ACBDLR2 (0x012 << DMPHY_SHIFT) +#define DMPHY_ACBDLR3 (0x013 << DMPHY_SHIFT) +#define DMPHY_ACBDLR4 (0x014 << DMPHY_SHIFT) +#define DMPHY_ACBDLR5 (0x015 << DMPHY_SHIFT) +#define DMPHY_ACBDLR6 (0x016 << DMPHY_SHIFT) +#define DMPHY_ACBDLR7 (0x017 << DMPHY_SHIFT) +#define DMPHY_ACBDLR8 (0x018 << DMPHY_SHIFT) +#define DMPHY_ACBDLR9 (0x019 << DMPHY_SHIFT) +#define DMPHY_ACIOCR0 (0x01A << DMPHY_SHIFT) +#define DMPHY_ACIOCR1 (0x01B << DMPHY_SHIFT) +#define DMPHY_ACIOCR2 (0x01C << DMPHY_SHIFT) +#define DMPHY_ACIOCR3 (0x01D << DMPHY_SHIFT) +#define DMPHY_ACIOCR4 (0x01E << DMPHY_SHIFT) +#define DMPHY_ACIOCR5 (0x01F << DMPHY_SHIFT) +#define DMPHY_DXCCR (0x020 << DMPHY_SHIFT) +#define DMPHY_DSGCR (0x021 << DMPHY_SHIFT) +#define DMPHY_DCR (0x022 << DMPHY_SHIFT) +#define DMPHY_DTPR0 (0x023 << DMPHY_SHIFT) +#define DMPHY_DTPR1 (0x024 << DMPHY_SHIFT) +#define DMPHY_DTPR2 (0x025 << DMPHY_SHIFT) +#define DMPHY_DTPR3 (0x026 << DMPHY_SHIFT) +#define DMPHY_MR0 (0x027 << DMPHY_SHIFT) +#define DMPHY_MR1 (0x028 << DMPHY_SHIFT) +#define DMPHY_MR2 (0x029 << DMPHY_SHIFT) +#define DMPHY_MR3 (0x02A << DMPHY_SHIFT) +#define DMPHY_ODTCR (0x02B << DMPHY_SHIFT) +#define DMPHY_DTCR (0x02C << DMPHY_SHIFT) +#define DMPHY_DTCR_RANKEN_SHIFT 24 /* Rank Enable */ +#define DMPHY_DTCR_RANKEN_MASK (0xf << (DMPHY_DTCR_RANKEN_SHIFT)) +#define DMPHY_DTAR0 (0x02D << DMPHY_SHIFT) +#define DMPHY_DTAR1 (0x02E << DMPHY_SHIFT) +#define DMPHY_DTAR2 (0x02F << DMPHY_SHIFT) +#define DMPHY_DTAR3 (0x030 << DMPHY_SHIFT) +#define DMPHY_DTDR0 (0x031 << DMPHY_SHIFT) +#define DMPHY_DTDR1 (0x032 << DMPHY_SHIFT) +#define DMPHY_DTEDR0 (0x033 << DMPHY_SHIFT) +#define DMPHY_DTEDR1 (0x034 << DMPHY_SHIFT) +#define DMPHY_ZQCR (0x090 << DMPHY_SHIFT) +#define DMPHY_ZQCR_AVGEN BIT(16) /* Average Algorithm */ +#define DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE BIT(27) /* force VT update */ +/* ZQ */ +#define DMPHY_ZQ_BASE (0x091 << DMPHY_SHIFT) +#define DMPHY_ZQ_STRIDE (0x004 << DMPHY_SHIFT) +#define DMPHY_ZQ_PR (0x000 << DMPHY_SHIFT) +#define DMPHY_ZQ_DR (0x001 << DMPHY_SHIFT) +#define DMPHY_ZQ_SR (0x002 << DMPHY_SHIFT) +/* DATX8 */ +#define DMPHY_DX_BASE (0x0A0 << DMPHY_SHIFT) +#define DMPHY_DX_STRIDE (0x020 << DMPHY_SHIFT) +#define DMPHY_DX_GCR0 (0x000 << DMPHY_SHIFT) +#define DMPHY_DX_GCR0_WLRKEN_SHIFT 26 /* Write Level Rank Enable */ +#define DMPHY_DX_GCR0_WLRKEN_MASK (0xf << (DMPHY_DX_GCR0_WLRKEN_SHIFT)) +#define DMPHY_DX_GCR1 (0x001 << DMPHY_SHIFT) +#define DMPHY_DX_GCR2 (0x002 << DMPHY_SHIFT) +#define DMPHY_DX_GCR3 (0x003 << DMPHY_SHIFT) +#define DMPHY_DX_GSR0 (0x004 << DMPHY_SHIFT) +#define DMPHY_DX_GSR1 (0x005 << DMPHY_SHIFT) +#define DMPHY_DX_GSR2 (0x006 << DMPHY_SHIFT) +#define DMPHY_DX_BDLR0 (0x007 << DMPHY_SHIFT) +#define DMPHY_DX_BDLR1 (0x008 << DMPHY_SHIFT) +#define DMPHY_DX_BDLR2 (0x009 << DMPHY_SHIFT) +#define DMPHY_DX_BDLR3 (0x00A << DMPHY_SHIFT) +#define DMPHY_DX_BDLR4 (0x00B << DMPHY_SHIFT) +#define DMPHY_DX_BDLR5 (0x00C << DMPHY_SHIFT) +#define DMPHY_DX_BDLR6 (0x00D << DMPHY_SHIFT) +#define DMPHY_DX_LCDLR0 (0x00E << DMPHY_SHIFT) +#define DMPHY_DX_LCDLR1 (0x00F << DMPHY_SHIFT) +#define DMPHY_DX_LCDLR2 (0x010 << DMPHY_SHIFT) +#define DMPHY_DX_MDLR (0x011 << DMPHY_SHIFT) +#define DMPHY_DX_GTR (0x012 << DMPHY_SHIFT) + +#endif /* ARCH_DDRMPHY_REGS_H */ diff --git a/arch/arm/mach-uniphier/dram/umc-proxstream2.c b/arch/arm/mach-uniphier/dram/umc-proxstream2.c new file mode 100644 index 0000000000..63a84e68c0 --- /dev/null +++ b/arch/arm/mach-uniphier/dram/umc-proxstream2.c @@ -0,0 +1,669 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * based on commit 21b6e480f92ccc38fe0502e3116411d6509d3bf2 of Diag by: + * Copyright (C) 2015 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#include "../init.h" +#include "../soc-info.h" +#include "ddrmphy-regs.h" + +/* UM registers */ +#define UMC_MBUS0 0x00080004 +#define UMC_MBUS1 0x00081004 +#define UMC_MBUS2 0x00082004 +#define UMC_MBUS3 0x00083004 + +/* UD registers */ +#define UMC_BITPERPIXELMODE_D0 0x010 +#define UMC_PAIR1DOFF_D0 0x054 + +/* DC registers */ +#define UMC_INITSET 0x014 +#define UMC_INITSTAT 0x018 +#define UMC_CMDCTLA 0x000 +#define UMC_CMDCTLB 0x004 +#define UMC_SPCCTLA 0x030 +#define UMC_SPCCTLB 0x034 +#define UMC_SPCSETB 0x03c +#define UMC_SPCSETB_AREFMD_MASK (0x3) /* Auto Refresh Mode */ +#define UMC_SPCSETB_AREFMD_ARB (0x0) /* control by arbitor */ +#define UMC_SPCSETB_AREFMD_CONT (0x1) /* control by DRAMCONT */ +#define UMC_SPCSETB_AREFMD_REG (0x2) /* control by register */ +#define UMC_ACSSETA 0x060 +#define UMC_FLOWCTLA 0x400 +#define UMC_FLOWCTLB 0x404 +#define UMC_FLOWCTLC 0x408 +#define UMC_FLOWCTLG 0x508 +#define UMC_FLOWCTLOB0 0x520 +#define UMC_FLOWCTLOB1 0x524 +#define UMC_RDATACTL_D0 0x600 +#define UMC_RDATACTL_RADLTY_SHIFT 4 +#define UMC_RDATACTL_RADLTY_MASK (0xf << (UMC_RDATACTL_RADLTY_SHIFT)) +#define UMC_RDATACTL_RAD2LTY_SHIFT 8 +#define UMC_RDATACTL_RAD2LTY_MASK (0xf << (UMC_RDATACTL_RAD2LTY_SHIFT)) +#define UMC_WDATACTL_D0 0x604 +#define UMC_RDATACTL_D1 0x608 +#define UMC_WDATACTL_D1 0x60c +#define UMC_DATASET 0x610 +#define UMC_RESPCTL 0x624 +#define UMC_DCCGCTL 0x720 +#define UMC_ERRMASKA 0x958 +#define UMC_ERRMASKB 0x95c +#define UMC_BSICMAPSET 0x988 +#define UMC_DIOCTLA 0xc00 +#define UMC_DIOCTLA_CTL_NRST BIT(8) /* ctl_rst_n */ +#define UMC_DIOCTLA_CFG_NRST BIT(0) /* cfg_rst_n */ +#define UMC_DFICUPDCTLA 0xc20 + +enum dram_freq { + FREQ_1866M, + FREQ_2133M, + FREQ_NR, +}; + +enum dram_size { + SIZE_0, + SIZE_512M, + SIZE_1G, + SIZE_NR, +}; + +static u32 ddrphy_pgcr2[FREQ_NR] = {0x00FC7E5D, 0x00FC90AB}; +static u32 ddrphy_ptr0[FREQ_NR] = {0x0EA09205, 0x10C0A6C6}; +static u32 ddrphy_ptr1[FREQ_NR] = {0x0DAC041B, 0x0FA104B1}; +static u32 ddrphy_ptr3[FREQ_NR] = {0x15171e45, 0x18182357}; +static u32 ddrphy_ptr4[FREQ_NR] = {0x0e9ad8e9, 0x10b34157}; +static u32 ddrphy_dtpr0[FREQ_NR] = {0x35a00d88, 0x39e40e88}; +static u32 ddrphy_dtpr1[FREQ_NR] = {0x2288cc2c, 0x228a04d0}; +static u32 ddrphy_dtpr2[FREQ_NR] = {0x50005e00, 0x50006a00}; +static u32 ddrphy_dtpr3[FREQ_NR] = {0x0010cb49, 0x0010ec89}; +static u32 ddrphy_mr0[FREQ_NR] = {0x00000115, 0x00000125}; +static u32 ddrphy_mr2[FREQ_NR] = {0x000002a0, 0x000002a8}; + +static u32 umc_cmdctla[FREQ_NR] = {0x66DD131D, 0x77EE1722}; +/* + * The ch2 is a different generation UMC core. + * The register spec is different, unfortunately. + */ +static u32 umc_cmdctlb_ch01[FREQ_NR] = {0x13E87C44, 0x18F88C44}; +static u32 umc_cmdctlb_ch2[FREQ_NR] = {0x19E8DC44, 0x1EF8EC44}; +static u32 umc_spcctla[FREQ_NR][SIZE_NR] = { + {0x00000000, 0x004A071D, 0x0078071D}, + {0x00000000, 0x0055081E, 0x0089081E}, +}; + +static u32 umc_spcctlb[] = {0x00FF000A, 0x00FF000B}; +/* The ch2 is different for some reason only hardware guys know... */ +static u32 umc_flowctla_ch01[] = {0x0800001E, 0x08000022}; +static u32 umc_flowctla_ch2[] = {0x0800001E, 0x0800001E}; + +/* DDR multiPHY */ +static inline int ddrphy_get_rank(int dx) +{ + return dx / 2; +} + +static void ddrphy_fifo_reset(void __iomem *phy_base) +{ + u32 tmp; + + tmp = readl(phy_base + DMPHY_PGCR0); + tmp &= ~DMPHY_PGCR0_PHYFRST; + writel(tmp, phy_base + DMPHY_PGCR0); + + udelay(1); + + tmp |= DMPHY_PGCR0_PHYFRST; + writel(tmp, phy_base + DMPHY_PGCR0); + + udelay(1); +} + +static void ddrphy_vt_ctrl(void __iomem *phy_base, int enable) +{ + u32 tmp; + + tmp = readl(phy_base + DMPHY_PGCR1); + + if (enable) + tmp &= ~DMPHY_PGCR1_INHVT; + else + tmp |= DMPHY_PGCR1_INHVT; + + writel(tmp, phy_base + DMPHY_PGCR1); + + if (!enable) { + while (!(readl(phy_base + DMPHY_PGSR1) & DMPHY_PGSR1_VTSTOP)) + cpu_relax(); + } +} + +static void ddrphy_dqs_delay_fixup(void __iomem *phy_base, int nr_dx, int step) +{ + int dx; + u32 lcdlr1, rdqsd; + void __iomem *dx_base = phy_base + DMPHY_DX_BASE; + + ddrphy_vt_ctrl(phy_base, 0); + + for (dx = 0; dx < nr_dx; dx++) { + lcdlr1 = readl(dx_base + DMPHY_DX_LCDLR1); + rdqsd = (lcdlr1 >> 8) & 0xff; + rdqsd = clamp(rdqsd + step, 0U, 0xffU); + lcdlr1 = (lcdlr1 & ~(0xff << 8)) | (rdqsd << 8); + writel(lcdlr1, dx_base + DMPHY_DX_LCDLR1); + readl(dx_base + DMPHY_DX_LCDLR1); /* relax */ + dx_base += DMPHY_DX_STRIDE; + } + + ddrphy_vt_ctrl(phy_base, 1); +} + +static int ddrphy_get_system_latency(void __iomem *phy_base, int width) +{ + void __iomem *dx_base = phy_base + DMPHY_DX_BASE; + const int nr_dx = width / 8; + int dx, rank; + u32 gtr; + int dgsl, dgsl_min = INT_MAX, dgsl_max = 0; + + for (dx = 0; dx < nr_dx; dx++) { + gtr = readl(dx_base + DMPHY_DX_GTR); + for (rank = 0; rank < 4; rank++) { + dgsl = gtr & 0x7; + /* if dgsl is zero, this rank was not trained. skip. */ + if (dgsl) { + dgsl_min = min(dgsl_min, dgsl); + dgsl_max = max(dgsl_max, dgsl); + } + gtr >>= 3; + } + dx_base += DMPHY_DX_STRIDE; + } + + if (dgsl_min != dgsl_max) + printf("DQS Gateing System Latencies are not all leveled.\n"); + + return dgsl_max; +} + +static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width) +{ + u32 tmp; + void __iomem *zq_base, *dx_base; + int zq, dx; + int nr_dx; + + nr_dx = width / 8; + + writel(DMPHY_PIR_ZCALBYP, phy_base + DMPHY_PIR); + /* + * Disable RGLVT bit (Read DQS Gating LCDL Delay VT Compensation) + * to avoid read error issue. + */ + writel(0x07d81e37, phy_base + DMPHY_PGCR0); + writel(0x0200c4e0, phy_base + DMPHY_PGCR1); + + tmp = ddrphy_pgcr2[freq]; + if (width >= 32) + tmp |= DMPHY_PGCR2_DUALCHN | DMPHY_PGCR2_ACPDDC; + writel(tmp, phy_base + DMPHY_PGCR2); + + writel(ddrphy_ptr0[freq], phy_base + DMPHY_PTR0); + writel(ddrphy_ptr1[freq], phy_base + DMPHY_PTR1); + writel(0x00083def, phy_base + DMPHY_PTR2); + writel(ddrphy_ptr3[freq], phy_base + DMPHY_PTR3); + writel(ddrphy_ptr4[freq], phy_base + DMPHY_PTR4); + + writel(0x55555555, phy_base + DMPHY_ACIOCR1); + writel(0x00000000, phy_base + DMPHY_ACIOCR2); + writel(0x55555555, phy_base + DMPHY_ACIOCR3); + writel(0x00000000, phy_base + DMPHY_ACIOCR4); + writel(0x00000055, phy_base + DMPHY_ACIOCR5); + writel(0x00181aa4, phy_base + DMPHY_DXCCR); + + writel(0x0024641e, phy_base + DMPHY_DSGCR); + writel(0x0000040b, phy_base + DMPHY_DCR); + writel(ddrphy_dtpr0[freq], phy_base + DMPHY_DTPR0); + writel(ddrphy_dtpr1[freq], phy_base + DMPHY_DTPR1); + writel(ddrphy_dtpr2[freq], phy_base + DMPHY_DTPR2); + writel(ddrphy_dtpr3[freq], phy_base + DMPHY_DTPR3); + writel(ddrphy_mr0[freq], phy_base + DMPHY_MR0); + writel(0x00000006, phy_base + DMPHY_MR1); + writel(ddrphy_mr2[freq], phy_base + DMPHY_MR2); + writel(0x00000000, phy_base + DMPHY_MR3); + + tmp = 0; + for (dx = 0; dx < nr_dx; dx++) + tmp |= BIT(DMPHY_DTCR_RANKEN_SHIFT + ddrphy_get_rank(dx)); + writel(0x90003087 | tmp, phy_base + DMPHY_DTCR); + + writel(0x00000000, phy_base + DMPHY_DTAR0); + writel(0x00000008, phy_base + DMPHY_DTAR1); + writel(0x00000010, phy_base + DMPHY_DTAR2); + writel(0x00000018, phy_base + DMPHY_DTAR3); + writel(0xdd22ee11, phy_base + DMPHY_DTDR0); + writel(0x7788bb44, phy_base + DMPHY_DTDR1); + + /* impedance control settings */ + writel(0x04048900, phy_base + DMPHY_ZQCR); + + zq_base = phy_base + DMPHY_ZQ_BASE; + for (zq = 0; zq < 4; zq++) { + /* + * board-dependent + * PXS2: CH0ZQ0=0x5B, CH1ZQ0=0x5B, CH2ZQ0=0x59, others=0x5D + */ + writel(0x0007BB5D, zq_base + DMPHY_ZQ_PR); + zq_base += DMPHY_ZQ_STRIDE; + } + + /* DATX8 settings */ + dx_base = phy_base + DMPHY_DX_BASE; + for (dx = 0; dx < 4; dx++) { + tmp = readl(dx_base + DMPHY_DX_GCR0); + tmp &= ~DMPHY_DX_GCR0_WLRKEN_MASK; + tmp |= BIT(DMPHY_DX_GCR0_WLRKEN_SHIFT + ddrphy_get_rank(dx)) & + DMPHY_DX_GCR0_WLRKEN_MASK; + writel(tmp, dx_base + DMPHY_DX_GCR0); + + writel(0x00000000, dx_base + DMPHY_DX_GCR1); + writel(0x00000000, dx_base + DMPHY_DX_GCR2); + writel(0x00000000, dx_base + DMPHY_DX_GCR3); + dx_base += DMPHY_DX_STRIDE; + } + + while (!(readl(phy_base + DMPHY_PGSR0) & DMPHY_PGSR0_IDONE)) + cpu_relax(); + + ddrphy_dqs_delay_fixup(phy_base, nr_dx, -4); +} + +struct ddrphy_init_sequence { + char *description; + u32 init_flag; + u32 done_flag; + u32 err_flag; +}; + +static const struct ddrphy_init_sequence impedance_calibration_sequence[] = { + { + "Impedance Calibration", + DMPHY_PIR_ZCAL, + DMPHY_PGSR0_ZCDONE, + DMPHY_PGSR0_ZCERR, + }, + { /* sentinel */ } +}; + +static const struct ddrphy_init_sequence dram_init_sequence[] = { + { + "DRAM Initialization", + DMPHY_PIR_DRAMRST | DMPHY_PIR_DRAMINIT, + DMPHY_PGSR0_DIDONE, + 0, + }, + { /* sentinel */ } +}; + +static const struct ddrphy_init_sequence training_sequence[] = { + { + "Write Leveling", + DMPHY_PIR_WL, + DMPHY_PGSR0_WLDONE, + DMPHY_PGSR0_WLERR, + }, + { + "Read DQS Gate Training", + DMPHY_PIR_QSGATE, + DMPHY_PGSR0_QSGDONE, + DMPHY_PGSR0_QSGERR, + }, + { + "Write Leveling Adjustment", + DMPHY_PIR_WLADJ, + DMPHY_PGSR0_WLADONE, + DMPHY_PGSR0_WLAERR, + }, + { + "Read Bit Deskew", + DMPHY_PIR_RDDSKW, + DMPHY_PGSR0_RDDONE, + DMPHY_PGSR0_RDERR, + }, + { + "Write Bit Deskew", + DMPHY_PIR_WRDSKW, + DMPHY_PGSR0_WDDONE, + DMPHY_PGSR0_WDERR, + }, + { + "Read Eye Training", + DMPHY_PIR_RDEYE, + DMPHY_PGSR0_REDONE, + DMPHY_PGSR0_REERR, + }, + { + "Write Eye Training", + DMPHY_PIR_WREYE, + DMPHY_PGSR0_WEDONE, + DMPHY_PGSR0_WEERR, + }, + { /* sentinel */ } +}; + +static int __ddrphy_training(void __iomem *phy_base, + const struct ddrphy_init_sequence *seq) +{ + const struct ddrphy_init_sequence *s; + u32 pgsr0; + u32 init_flag = DMPHY_PIR_INIT; + u32 done_flag = DMPHY_PGSR0_IDONE; + int timeout = 50000; /* 50 msec is long enough */ +#ifdef DISPLAY_ELAPSED_TIME + ulong start = get_timer(0); +#endif + + for (s = seq; s->description; s++) { + init_flag |= s->init_flag; + done_flag |= s->done_flag; + } + + writel(init_flag, phy_base + DMPHY_PIR); + + do { + if (--timeout < 0) { + printf("%s: error: timeout during DDR training\n", + __func__); + return -ETIMEDOUT; + } + udelay(1); + pgsr0 = readl(phy_base + DMPHY_PGSR0); + } while ((pgsr0 & done_flag) != done_flag); + + for (s = seq; s->description; s++) { + if (pgsr0 & s->err_flag) { + printf("%s: error: %s failed\n", __func__, + s->description); + return -EIO; + } + } + +#ifdef DISPLAY_ELAPSED_TIME + printf("%s: info: elapsed time %ld msec\n", get_timer(start)); +#endif + + return 0; +} + +static int ddrphy_impedance_calibration(void __iomem *phy_base) +{ + int ret; + u32 tmp; + + ret = __ddrphy_training(phy_base, impedance_calibration_sequence); + if (ret) + return ret; + + /* + * Because of a hardware bug, IDONE flag is set when the first ZQ block + * is calibrated. The flag does not guarantee the completion for all + * the ZQ blocks. Wait a little more just in case. + */ + udelay(1); + + /* reflect ZQ settings and enable average algorithm*/ + tmp = readl(phy_base + DMPHY_ZQCR); + tmp |= DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE; + writel(tmp, phy_base + DMPHY_ZQCR); + tmp &= ~DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE; + tmp |= DMPHY_ZQCR_AVGEN; + writel(tmp, phy_base + DMPHY_ZQCR); + + return 0; +} + +static int ddrphy_dram_init(void __iomem *phy_base) +{ + return __ddrphy_training(phy_base, dram_init_sequence); +} + +static int ddrphy_training(void __iomem *phy_base) +{ + return __ddrphy_training(phy_base, training_sequence); +} + +/* UMC */ +static void umc_set_system_latency(void __iomem *umc_dc_base, int phy_latency) +{ + u32 val; + int latency; + + val = readl(umc_dc_base + UMC_RDATACTL_D0); + latency = (val & UMC_RDATACTL_RADLTY_MASK) >> UMC_RDATACTL_RADLTY_SHIFT; + latency += (val & UMC_RDATACTL_RAD2LTY_MASK) >> + UMC_RDATACTL_RAD2LTY_SHIFT; + /* + * UMC works at the half clock rate of the PHY. + * The LSB of latency is ignored + */ + latency += phy_latency & ~1; + + val &= ~(UMC_RDATACTL_RADLTY_MASK | UMC_RDATACTL_RAD2LTY_MASK); + if (latency > 0xf) { + val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT; + val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT; + } else { + val |= latency << UMC_RDATACTL_RADLTY_SHIFT; + } + + writel(val, umc_dc_base + UMC_RDATACTL_D0); + writel(val, umc_dc_base + UMC_RDATACTL_D1); + + readl(umc_dc_base + UMC_RDATACTL_D1); /* relax */ +} + +/* enable/disable auto refresh */ +void umc_refresh_ctrl(void __iomem *umc_dc_base, int enable) +{ + u32 tmp; + + tmp = readl(umc_dc_base + UMC_SPCSETB); + tmp &= ~UMC_SPCSETB_AREFMD_MASK; + + if (enable) + tmp |= UMC_SPCSETB_AREFMD_ARB; + else + tmp |= UMC_SPCSETB_AREFMD_REG; + + writel(tmp, umc_dc_base + UMC_SPCSETB); + udelay(1); +} + +static void umc_ud_init(void __iomem *umc_base, int ch) +{ + writel(0x00000003, umc_base + UMC_BITPERPIXELMODE_D0); + + if (ch == 2) + writel(0x00000033, umc_base + UMC_PAIR1DOFF_D0); +} + +static void umc_dc_init(void __iomem *umc_dc_base, enum dram_freq freq, + enum dram_size size, int ch, int width) +{ + int latency; + u32 val; + + writel(umc_cmdctla[freq], umc_dc_base + UMC_CMDCTLA); + + writel(ch == 2 ? umc_cmdctlb_ch2[freq] : umc_cmdctlb_ch01[freq], + umc_dc_base + UMC_CMDCTLB); + + writel(umc_spcctla[freq][size / (width / 16)], + umc_dc_base + UMC_SPCCTLA); + writel(umc_spcctlb[freq], umc_dc_base + UMC_SPCCTLB); + + val = 0x000e000e; + latency = 12; + /* ES2 inserted one more FF to the logic. */ + if (uniphier_get_soc_model() >= 2) + latency += 2; + + if (latency > 0xf) { + val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT; + val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT; + } else { + val |= latency << UMC_RDATACTL_RADLTY_SHIFT; + } + + writel(val, umc_dc_base + UMC_RDATACTL_D0); + if (width >= 32) + writel(val, umc_dc_base + UMC_RDATACTL_D1); + + writel(0x04060A02, umc_dc_base + UMC_WDATACTL_D0); + if (width >= 32) + writel(0x04060A02, umc_dc_base + UMC_WDATACTL_D1); + writel(0x04000000, umc_dc_base + UMC_DATASET); + writel(0x00400020, umc_dc_base + UMC_DCCGCTL); + writel(0x00000084, umc_dc_base + UMC_FLOWCTLG); + writel(0x00000000, umc_dc_base + UMC_ACSSETA); + + writel(ch == 2 ? umc_flowctla_ch2[freq] : umc_flowctla_ch01[freq], + umc_dc_base + UMC_FLOWCTLA); + + writel(0x00004400, umc_dc_base + UMC_FLOWCTLC); + writel(0x200A0A00, umc_dc_base + UMC_SPCSETB); + writel(0x00000520, umc_dc_base + UMC_DFICUPDCTLA); + writel(0x0000000D, umc_dc_base + UMC_RESPCTL); + + if (ch != 2) { + writel(0x00202000, umc_dc_base + UMC_FLOWCTLB); + writel(0xFDBFFFFF, umc_dc_base + UMC_FLOWCTLOB0); + writel(0xFFFFFFFF, umc_dc_base + UMC_FLOWCTLOB1); + writel(0x00080700, umc_dc_base + UMC_BSICMAPSET); + } else { + writel(0x00200000, umc_dc_base + UMC_FLOWCTLB); + writel(0x00000000, umc_dc_base + UMC_BSICMAPSET); + } + + writel(0x00000000, umc_dc_base + UMC_ERRMASKA); + writel(0x00000000, umc_dc_base + UMC_ERRMASKB); +} + +static int umc_init(void __iomem *umc_base, enum dram_freq freq, int ch, + enum dram_size size, int width) +{ + void __iomem *umc_dc_base = umc_base + 0x00011000; + void __iomem *phy_base = umc_base + 0x00030000; + int ret; + + writel(0x00000002, umc_dc_base + UMC_INITSET); + while (readl(umc_dc_base + UMC_INITSTAT) & BIT(2)) + cpu_relax(); + + /* deassert PHY reset signals */ + writel(UMC_DIOCTLA_CTL_NRST | UMC_DIOCTLA_CFG_NRST, + umc_dc_base + UMC_DIOCTLA); + + ddrphy_init(phy_base, freq, width); + + ret = ddrphy_impedance_calibration(phy_base); + if (ret) + return ret; + + ddrphy_dram_init(phy_base); + if (ret) + return ret; + + umc_dc_init(umc_dc_base, freq, size, ch, width); + + umc_ud_init(umc_base, ch); + + if (size) { + ret = ddrphy_training(phy_base); + if (ret) + return ret; + } + + udelay(1); + + /* match the system latency between UMC and PHY */ + umc_set_system_latency(umc_dc_base, + ddrphy_get_system_latency(phy_base, width)); + + udelay(1); + + /* stop auto refresh before clearing FIFO in PHY */ + umc_refresh_ctrl(umc_dc_base, 0); + ddrphy_fifo_reset(phy_base); + umc_refresh_ctrl(umc_dc_base, 1); + + udelay(10); + + return 0; +} + +static void um_init(void __iomem *um_base) +{ + writel(0x000000ff, um_base + UMC_MBUS0); + writel(0x000000ff, um_base + UMC_MBUS1); + writel(0x000000ff, um_base + UMC_MBUS2); + writel(0x000000ff, um_base + UMC_MBUS3); +} + +int proxstream2_umc_init(const struct uniphier_board_data *bd) +{ + void __iomem *um_base = (void __iomem *)0x5b600000; + void __iomem *umc_ch0_base = (void __iomem *)0x5b800000; + void __iomem *umc_ch1_base = (void __iomem *)0x5ba00000; + void __iomem *umc_ch2_base = (void __iomem *)0x5bc00000; + enum dram_freq freq; + int ret; + + switch (bd->dram_freq) { + case 1866: + freq = FREQ_1866M; + break; + case 2133: + freq = FREQ_2133M; + break; + default: + printf("unsupported DRAM frequency %d MHz\n", bd->dram_freq); + return -EINVAL; + } + + ret = umc_init(umc_ch0_base, freq, 0, bd->dram_ch0_size / SZ_256M, + bd->dram_ch0_width); + if (ret) { + printf("failed to initialize UMC ch0\n"); + return ret; + } + + ret = umc_init(umc_ch1_base, freq, 1, bd->dram_ch1_size / SZ_256M, + bd->dram_ch1_width); + if (ret) { + printf("failed to initialize UMC ch1\n"); + return ret; + } + + ret = umc_init(umc_ch2_base, freq, 2, bd->dram_ch2_size / SZ_256M, + bd->dram_ch2_width); + if (ret) { + printf("failed to initialize UMC ch2\n"); + return ret; + } + + um_init(um_base); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index 27ae27dc9f..0a47e70dcf 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -80,6 +80,7 @@ int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); int ph1_ld4_umc_init(const struct uniphier_board_data *bd); int ph1_pro4_umc_init(const struct uniphier_board_data *bd); int ph1_sld8_umc_init(const struct uniphier_board_data *bd); +int proxstream2_umc_init(const struct uniphier_board_data *bd); void ph1_sld3_pin_init(void); void ph1_ld4_pin_init(void); diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c index 859e2e9b8b..029c544997 100644 --- a/arch/arm/mach-uniphier/init/init-proxstream2.c +++ b/arch/arm/mach-uniphier/init/init-proxstream2.c @@ -12,6 +12,8 @@ int proxstream2_init(const struct uniphier_board_data *bd) { + int ret; + proxstream2_sbc_init(bd); support_card_reset(); @@ -37,5 +39,11 @@ int proxstream2_init(const struct uniphier_board_data *bd) led_puts("L4"); + ret = proxstream2_umc_init(bd); + if (ret) + return ret; + + led_puts("L5"); + return 0; }