From: Ashok Reddy Soma Date: Fri, 11 Aug 2023 05:48:29 +0000 (-0600) Subject: pinctrl: zynqmp: Add support for output-enable and bias-high-impedance X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=12d2da980ec4c775c115f1e141167525364e854b;p=u-boot.git pinctrl: zynqmp: Add support for output-enable and bias-high-impedance Add support to handle 'output-enable' and 'bias-high-impedance' configurations in pinctrl driver. Signed-off-by: Ashok Reddy Soma Link: https://lore.kernel.org/r/20230811054829.13162-4-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek --- diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c index e9857f5ed9..517035961d 100644 --- a/drivers/pinctrl/pinctrl-zynqmp.c +++ b/drivers/pinctrl/pinctrl-zynqmp.c @@ -473,6 +473,10 @@ static int zynqmp_pinconf_set(struct udevice *dev, unsigned int pin, pin); break; case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + param = PM_PINCTRL_CONFIG_TRI_STATE; + arg = PM_PINCTRL_TRI_STATE_ENABLE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; case PIN_CONFIG_LOW_POWER_MODE: /* * This cases are mentioned in dts but configurable @@ -481,6 +485,11 @@ static int zynqmp_pinconf_set(struct udevice *dev, unsigned int pin, */ ret = 0; break; + case PIN_CONFIG_OUTPUT_ENABLE: + param = PM_PINCTRL_CONFIG_TRI_STATE; + arg = PM_PINCTRL_TRI_STATE_DISABLE; + ret = zynqmp_pm_pinctrl_set_config(pin, param, arg); + break; default: dev_warn(dev, "unsupported configuration parameter '%u'\n", param);