From: Neil Armstrong Date: Fri, 29 Mar 2024 17:51:52 +0000 (+0100) Subject: dts: meson: Drop redundant G12A, G12B & SM1 devicetree files X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=114df8b5339e503b50b6ac1a61bf1daac57c2e11;p=u-boot.git dts: meson: Drop redundant G12A, G12B & SM1 devicetree files Since meson G12A, G12B & SM1 based boards switched to using upstream DT, so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files kept in arch/arm/dts directory for these boards. Cc: Sumit Garg Acked-by: Viacheslav Bocharov Reviewed-by: Sumit Garg Tested-by: Mattijs Korpershoek # khadas-vim3_android Link: https://lore.kernel.org/r/20240329-u-boot-of-upstream-v2-5-2512ad3eb63d@linaro.org Signed-off-by: Neil Armstrong --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cfed865b19..da56c70128 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -219,27 +219,8 @@ dtb-$(CONFIG_ARCH_S5P4418) += \ s5p4418-nanopi2.dtb dtb-$(CONFIG_ARCH_MESON) += \ - meson-a1-ad401.dtb \ - meson-g12a-radxa-zero.dtb \ - meson-g12a-sei510.dtb \ - meson-g12a-u200.dtb \ - meson-g12b-a311d-bananapi-m2s.dtb \ - meson-g12b-a311d-khadas-vim3.dtb \ - meson-g12b-bananapi-cm4-cm4io.dtb \ - meson-g12b-gsking-x.dtb \ - meson-g12b-gtking.dtb \ - meson-g12b-gtking-pro.dtb \ - meson-g12b-odroid-go-ultra.dtb \ - meson-g12b-odroid-n2.dtb \ - meson-g12b-odroid-n2l.dtb \ - meson-g12b-odroid-n2-plus.dtb \ - meson-g12b-radxa-zero2.dtb \ - meson-sm1-bananapi-m2-pro.dtb \ - meson-sm1-bananapi-m5.dtb \ - meson-sm1-khadas-vim3l.dtb \ - meson-sm1-odroid-c4.dtb \ - meson-sm1-odroid-hc4.dtb \ - meson-sm1-sei610.dtb + meson-a1-ad401.dtb + dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi deleted file mode 100644 index 9dbd50820b..0000000000 --- a/arch/arm/dts/meson-g12-common.dtsi +++ /dev/null @@ -1,2493 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - mmc0 = &sd_emmc_b; /* SD card */ - mmc1 = &sd_emmc_c; /* eMMC */ - mmc2 = &sd_emmc_a; /* SDIO */ - }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - simplefb_cvbs: framebuffer-cvbs { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-cvbs"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - status = "disabled"; - }; - - simplefb_hdmi: framebuffer-hdmi { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-hdmi"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - status = "disabled"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - }; - - gpu_opp_table: opp-table-gpu { - compatible = "operating-points-v2"; - - opp-124999998 { - opp-hz = /bits/ 64 <124999998>; - opp-microvolt = <800000>; - }; - opp-249999996 { - opp-hz = /bits/ 64 <249999996>; - opp-microvolt = <800000>; - }; - opp-285714281 { - opp-hz = /bits/ 64 <285714281>; - opp-microvolt = <800000>; - }; - opp-399999994 { - opp-hz = /bits/ 64 <399999994>; - opp-microvolt = <800000>; - }; - opp-499999992 { - opp-hz = /bits/ 64 <499999992>; - opp-microvolt = <800000>; - }; - opp-666666656 { - opp-hz = /bits/ 64 <666666656>; - opp-microvolt = <800000>; - }; - opp-799999987 { - opp-hz = /bits/ 64 <799999987>; - opp-microvolt = <800000>; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - - /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ - secmon_reserved_bl32: secmon@5300000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - pcie: pcie@fc000000 { - compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; - reg = <0x0 0xfc000000 0x0 0x400000>, - <0x0 0xff648000 0x0 0x2000>, - <0x0 0xfc400000 0x0 0x200000>; - reg-names = "elbi", "cfg", "config"; - interrupts = ; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, - <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; - - clocks = <&clkc CLKID_PCIE_PHY - &clkc CLKID_PCIE_COMB - &clkc CLKID_PCIE_PLL>; - clock-names = "general", - "pclk", - "port"; - resets = <&reset RESET_PCIE_CTRL_A>, - <&reset RESET_PCIE_APB>; - reset-names = "port", - "apb"; - num-lanes = <1>; - phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; - phy-names = "pcie"; - status = "disabled"; - }; - - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-g12a-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000>, - <0x0 0xff634540 0x0 0x8>; - interrupts = ; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", - "timing-adjustment"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - }; - - apb: bus@ff600000 { - compatible = "simple-bus"; - reg = <0x0 0xff600000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - - hdmi_tx: hdmi-tx@0 { - compatible = "amlogic,meson-g12a-dw-hdmi"; - reg = <0x0 0x0 0x0 0x10000>; - interrupts = ; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMITX_PHY>, - <&reset RESET_HDMITX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - - apb_efuse: bus@30000 { - compatible = "simple-bus"; - reg = <0x0 0x30000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; - - hwrng: rng@218 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x218 0x0 0x4>; - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; - }; - }; - - acodec: audio-controller@32000 { - compatible = "amlogic,t9015"; - reg = <0x0 0x32000 0x0 0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "ACODEC"; - clocks = <&clkc CLKID_AUDIO_CODEC>; - clock-names = "pclk"; - resets = <&reset RESET_AUDIO_CODEC>; - status = "disabled"; - }; - - periphs: bus@34400 { - compatible = "simple-bus"; - reg = <0x0 0x34400 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; - - periphs_pinctrl: pinctrl@40 { - compatible = "amlogic,meson-g12a-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@40 { - reg = <0x0 0x40 0x0 0x4c>, - <0x0 0xe8 0x0 0x18>, - <0x0 0x120 0x0 0x18>, - <0x0 0x2c0 0x0 0x40>, - <0x0 0x340 0x0 0x1c>; - reg-names = "gpio", - "pull", - "pull-enable", - "mux", - "ds"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 86>; - }; - - cec_ao_a_h_pins: cec_ao_a_h { - mux { - groups = "cec_ao_a_h"; - function = "cec_ao_a_h"; - bias-disable; - }; - }; - - cec_ao_b_h_pins: cec_ao_b_h { - mux { - groups = "cec_ao_b_h"; - function = "cec_ao_b_h"; - bias-disable; - }; - }; - - emmc_ctrl_pins: emmc-ctrl { - mux-0 { - groups = "emmc_cmd"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - emmc_data_4b_pins: emmc-data-4b { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - }; - - emmc_data_8b_pins: emmc-data-8b { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_ddc_pins: hdmitx_ddc { - mux { - groups = "hdmitx_sda", - "hdmitx_sck"; - function = "hdmitx"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_hpd_pins: hdmitx_hpd { - mux { - groups = "hdmitx_hpd_in"; - function = "hdmitx"; - bias-disable; - }; - }; - - - i2c0_sda_c_pins: i2c0-sda-c { - mux { - groups = "i2c0_sda_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - - }; - }; - - i2c0_sck_c_pins: i2c0-sck-c { - mux { - groups = "i2c0_sck_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z0_pins: i2c0-sda-z0 { - mux { - groups = "i2c0_sda_z0"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sck_z1_pins: i2c0-sck-z1 { - mux { - groups = "i2c0_sck_z1"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z7_pins: i2c0-sda-z7 { - mux { - groups = "i2c0_sda_z7"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z8_pins: i2c0-sda-z8 { - mux { - groups = "i2c0_sda_z8"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_x_pins: i2c1-sda-x { - mux { - groups = "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_x_pins: i2c1-sck-x { - mux { - groups = "i2c1_sck_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h2_pins: i2c1-sda-h2 { - mux { - groups = "i2c1_sda_h2"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h3_pins: i2c1-sck-h3 { - mux { - groups = "i2c1_sck_h3"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h6_pins: i2c1-sda-h6 { - mux { - groups = "i2c1_sda_h6"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h7_pins: i2c1-sck-h7 { - mux { - groups = "i2c1_sck_h7"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_x_pins: i2c2-sda-x { - mux { - groups = "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_x_pins: i2c2-sck-x { - mux { - groups = "i2c2_sck_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_z_pins: i2c2-sda-z { - mux { - groups = "i2c2_sda_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_z_pins: i2c2-sck-z { - mux { - groups = "i2c2_sck_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_h_pins: i2c3-sda-h { - mux { - groups = "i2c3_sda_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_h_pins: i2c3-sck-h { - mux { - groups = "i2c3_sck_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_a_pins: i2c3-sda-a { - mux { - groups = "i2c3_sda_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_a_pins: i2c3-sck-a { - mux { - groups = "i2c3_sck_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_a_pins: mclk0-a { - mux { - groups = "mclk0_a"; - function = "mclk0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_a_pins: mclk1-a { - mux { - groups = "mclk1_a"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_x_pins: mclk1-x { - mux { - groups = "mclk1_x"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_z_pins: mclk1-z { - mux { - groups = "mclk1_z"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - bias-disable; - }; - }; - - pdm_din0_a_pins: pdm-din0-a { - mux { - groups = "pdm_din0_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_c_pins: pdm-din0-c { - mux { - groups = "pdm_din0_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_x_pins: pdm-din0-x { - mux { - groups = "pdm_din0_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_z_pins: pdm-din0-z { - mux { - groups = "pdm_din0_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_a_pins: pdm-din1-a { - mux { - groups = "pdm_din1_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_c_pins: pdm-din1-c { - mux { - groups = "pdm_din1_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_x_pins: pdm-din1-x { - mux { - groups = "pdm_din1_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_z_pins: pdm-din1-z { - mux { - groups = "pdm_din1_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_a_pins: pdm-din2-a { - mux { - groups = "pdm_din2_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_c_pins: pdm-din2-c { - mux { - groups = "pdm_din2_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_x_pins: pdm-din2-x { - mux { - groups = "pdm_din2_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_z_pins: pdm-din2-z { - mux { - groups = "pdm_din2_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_a_pins: pdm-din3-a { - mux { - groups = "pdm_din3_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_c_pins: pdm-din3-c { - mux { - groups = "pdm_din3_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_x_pins: pdm-din3-x { - mux { - groups = "pdm_din3_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_z_pins: pdm-din3-z { - mux { - groups = "pdm_din3_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a_pins: pdm-dclk-a { - mux { - groups = "pdm_dclk_a"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_c_pins: pdm-dclk-c { - mux { - groups = "pdm_dclk_c"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_x_pins: pdm-dclk-x { - mux { - groups = "pdm_dclk_x"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_z_pins: pdm-dclk-z { - mux { - groups = "pdm_dclk_z"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pwm_a_pins: pwm-a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_x7_pins: pwm-b-x7 { - mux { - groups = "pwm_b_x7"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x19_pins: pwm-b-x19 { - mux { - groups = "pwm_b_x19"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_c_pins: pwm-c-c { - mux { - groups = "pwm_c_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x5_pins: pwm-c-x5 { - mux { - groups = "pwm_c_x5"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x8_pins: pwm-c-x8 { - mux { - groups = "pwm_c_x8"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x3_pins: pwm-d-x3 { - mux { - groups = "pwm_d_x3"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x6_pins: pwm-d-x6 { - mux { - groups = "pwm_d_x6"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm-e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_z_pins: pwm-f-z { - mux { - groups = "pwm_f_z"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_a_pins: pwm-f-a { - mux { - groups = "pwm_f_a"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm-f-x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_h_pins: pwm-f-h { - mux { - groups = "pwm_f_h"; - function = "pwm_f"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux-0 { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_c"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_z_pins: sdcard_z { - mux-0 { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_z"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_clk", - "sdio_cmd"; - function = "sdio"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - spdif_in_a10_pins: spdif-in-a10 { - mux { - groups = "spdif_in_a10"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a12_pins: spdif-in-a12 { - mux { - groups = "spdif_in_a12"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_h_pins: spdif-in-h { - mux { - groups = "spdif_in_h"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif-out-h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif-out-a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a13_pins: spdif-out-a13 { - mux { - groups = "spdif_out_a13"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spicc0_x_pins: spicc0-x { - mux { - groups = "spi0_mosi_x", - "spi0_miso_x", - "spi0_clk_x"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc0_ss0_x_pins: spicc0-ss0-x { - mux { - groups = "spi0_ss0_x"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc0_c_pins: spicc0-c { - mux { - groups = "spi0_mosi_c", - "spi0_miso_c", - "spi0_ss0_c", - "spi0_clk_c"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc1_pins: spicc1 { - mux { - groups = "spi1_mosi", - "spi1_miso", - "spi1_clk"; - function = "spi1"; - drive-strength-microamp = <4000>; - }; - }; - - spicc1_ss0_pins: spicc1-ss0 { - mux { - groups = "spi1_ss0"; - function = "spi1"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_a_din0_pins: tdm-a-din0 { - mux { - groups = "tdm_a_din0"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_din1_pins: tdm-a-din1 { - mux { - groups = "tdm_a_din1"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_a_dout0_pins: tdm-a-dout0 { - mux { - groups = "tdm_a_dout0"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_dout1_pins: tdm-a-dout1 { - mux { - groups = "tdm_a_dout1"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_fs_pins: tdm-a-fs { - mux { - groups = "tdm_a_fs"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_sclk_pins: tdm-a-sclk { - mux { - groups = "tdm_a_sclk"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_slv_fs_pins: tdm-a-slv-fs { - mux { - groups = "tdm_a_slv_fs"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_slv_sclk_pins: tdm-a-slv-sclk { - mux { - groups = "tdm_a_slv_sclk"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_b_din0_pins: tdm-b-din0 { - mux { - groups = "tdm_b_din0"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din1_pins: tdm-b-din1 { - mux { - groups = "tdm_b_din1"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din2_pins: tdm-b-din2 { - mux { - groups = "tdm_b_din2"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_a_pins: tdm-b-din3-a { - mux { - groups = "tdm_b_din3_a"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_h_pins: tdm-b-din3-h { - mux { - groups = "tdm_b_din3_h"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_dout0_pins: tdm-b-dout0 { - mux { - groups = "tdm_b_dout0"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout1_pins: tdm-b-dout1 { - mux { - groups = "tdm_b_dout1"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout2_pins: tdm-b-dout2 { - mux { - groups = "tdm_b_dout2"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_a_pins: tdm-b-dout3-a { - mux { - groups = "tdm_b_dout3_a"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_h_pins: tdm-b-dout3-h { - mux { - groups = "tdm_b_dout3_h"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_fs_pins: tdm-b-fs { - mux { - groups = "tdm_b_fs"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_sclk_pins: tdm-b-sclk { - mux { - groups = "tdm_b_sclk"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_slv_fs_pins: tdm-b-slv-fs { - mux { - groups = "tdm_b_slv_fs"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_slv_sclk_pins: tdm-b-slv-sclk { - mux { - groups = "tdm_b_slv_sclk"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_c_din0_a_pins: tdm-c-din0-a { - mux { - groups = "tdm_c_din0_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din0_z_pins: tdm-c-din0-z { - mux { - groups = "tdm_c_din0_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_a_pins: tdm-c-din1-a { - mux { - groups = "tdm_c_din1_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_z_pins: tdm-c-din1-z { - mux { - groups = "tdm_c_din1_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din2_a_pins: tdm-c-din2-a { - mux { - groups = "tdm_c_din2_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_pins: eth { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_c_din2_z_pins: tdm-c-din2-z { - mux { - groups = "tdm_c_din2_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_a_pins: tdm-c-din3-a { - mux { - groups = "tdm_c_din3_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_z_pins: tdm-c-din3-z { - mux { - groups = "tdm_c_din3_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_dout0_a_pins: tdm-c-dout0-a { - mux { - groups = "tdm_c_dout0_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout0_z_pins: tdm-c-dout0-z { - mux { - groups = "tdm_c_dout0_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_a_pins: tdm-c-dout1-a { - mux { - groups = "tdm_c_dout1_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_z_pins: tdm-c-dout1-z { - mux { - groups = "tdm_c_dout1_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_a_pins: tdm-c-dout2-a { - mux { - groups = "tdm_c_dout2_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_z_pins: tdm-c-dout2-z { - mux { - groups = "tdm_c_dout2_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_a_pins: tdm-c-dout3-a { - mux { - groups = "tdm_c_dout3_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_z_pins: tdm-c-dout3-z { - mux { - groups = "tdm_c_dout3_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_a_pins: tdm-c-fs-a { - mux { - groups = "tdm_c_fs_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_z_pins: tdm-c-fs-z { - mux { - groups = "tdm_c_fs_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_a_pins: tdm-c-sclk-a { - mux { - groups = "tdm_c_sclk_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_z_pins: tdm-c-sclk-z { - mux { - groups = "tdm_c_sclk_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { - mux { - groups = "tdm_c_slv_fs_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { - mux { - groups = "tdm_c_slv_fs_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { - mux { - groups = "tdm_c_slv_sclk_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { - mux { - groups = "tdm_c_slv_sclk_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart-b { - mux { - groups = "uart_b_tx", - "uart_b_rx"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart-c { - mux { - groups = "uart_c_tx", - "uart_c_rx"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart-c-cts-rts { - mux { - groups = "uart_c_cts", - "uart_c_rts"; - function = "uart_c"; - bias-disable; - }; - }; - }; - }; - - cpu_temp: temperature-sensor@34800 { - compatible = "amlogic,g12a-cpu-thermal", - "amlogic,g12a-thermal"; - reg = <0x0 0x34800 0x0 0x50>; - interrupts = ; - clocks = <&clkc CLKID_TS>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; - - ddr_temp: temperature-sensor@34c00 { - compatible = "amlogic,g12a-ddr-thermal", - "amlogic,g12a-thermal"; - reg = <0x0 0x34c00 0x0 0x50>; - interrupts = ; - clocks = <&clkc CLKID_TS>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; - - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY20>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - dmc: bus@38000 { - compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - usb2_phy1: phy@3a000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x3a000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - hiu: bus@3c000 { - compatible = "simple-bus"; - reg = <0x0 0x3c000 0x0 0x1400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; - - hhi: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,g12a-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - - pwrc: power-controller { - compatible = "amlogic,meson-g12a-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&rti>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", "bt656", - "rdma", "venci", "vencp", "vdac", - "vdi6", "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - }; - }; - - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - assigned-clocks = <&clkc CLKID_PCIE_PLL>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - }; - - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_50M>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3301", - "ethernet-phy-ieee802.3-c22"; - interrupts = ; - reg = <8>; - max-speed = <100>; - }; - }; - }; - }; - - pmu: pmu@ff638000 { - reg = <0x0 0xff638000 0x0 0x100>, - <0x0 0xff638c00 0x0 0x100>; - interrupts = ; - }; - - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - rti: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", - "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-g12a-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - - ao_pinctrl: pinctrl@14 { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; - }; - - i2c_ao_sck_pins: i2c_ao_sck_pins { - mux { - groups = "i2c_ao_sck"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_pins: i2c_ao_sda { - mux { - groups = "i2c_ao_sda"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sck_e_pins: i2c_ao_sck_e { - mux { - groups = "i2c_ao_sck_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_e_pins: i2c_ao_sda_e { - mux { - groups = "i2c_ao_sda_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_ao_pins: mclk0-ao { - mux { - groups = "mclk0_ao"; - function = "mclk0_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_din0_pins: tdm-ao-b-din0 { - mux { - groups = "tdm_ao_b_din0"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - spdif_ao_out_pins: spdif-ao-out { - mux { - groups = "spdif_ao_out"; - function = "spdif_ao_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_ao_b_din1_pins: tdm-ao-b-din1 { - mux { - groups = "tdm_ao_b_din1"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_din2_pins: tdm-ao-b-din2 { - mux { - groups = "tdm_ao_b_din2"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { - mux { - groups = "tdm_ao_b_dout0"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { - mux { - groups = "tdm_ao_b_dout1"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { - mux { - groups = "tdm_ao_b_dout2"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_fs_pins: tdm-ao-b-fs { - mux { - groups = "tdm_ao_b_fs"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_sclk_pins: tdm-ao-b-sclk { - mux { - groups = "tdm_ao_b_sclk"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { - mux { - groups = "tdm_ao_b_slv_fs"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { - mux { - groups = "tdm_ao_b_slv_sclk"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_b_2_3_pins: uart-ao-b-2-3 { - mux { - groups = "uart_ao_b_tx_2", - "uart_ao_b_rx_3"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_8_9_pins: uart-ao-b-8-9 { - mux { - groups = "uart_ao_b_tx_8", - "uart_ao_b_rx_9"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { - mux { - groups = "uart_ao_b_cts", - "uart_ao_b_rts"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - pwm_a_e_pins: pwm-a-e { - mux { - groups = "pwm_a_e"; - function = "pwm_a_e"; - bias-disable; - }; - }; - - pwm_ao_a_pins: pwm-ao-a { - mux { - groups = "pwm_ao_a"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm-ao-b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_c_4_pins: pwm-ao-c-4 { - mux { - groups = "pwm_ao_c_4"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_c_6_pins: pwm-ao-c-6 { - mux { - groups = "pwm_ao_c_6"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_d_5_pins: pwm-ao-d-5 { - mux { - groups = "pwm_ao_d_5"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_10_pins: pwm-ao-d-10 { - mux { - groups = "pwm_ao_d_10"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_e_pins: pwm-ao-d-e { - mux { - groups = "pwm_ao_d_e"; - function = "pwm_ao_d"; - }; - }; - - remote_input_ao_pins: remote-input-ao { - mux { - groups = "remote_ao_input"; - function = "remote_ao_input"; - bias-disable; - }; - }; - }; - }; - - vrtc: rtc@a8 { - compatible = "amlogic,meson-vrtc"; - reg = <0x0 0x000a8 0x0 0x4>; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = ; - clocks = <&clkc_AO CLKID_AO_CEC>; - clock-names = "core"; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - cecb_AO: cec@280 { - compatible = "amlogic,meson-g12a-ao-cec"; - reg = <0x0 0x00280 0x0 0x1c>; - interrupts = ; - clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; - clock-names = "oscin"; - status = "disabled"; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-g12a-ao-pwm-cd"; - reg = <0x0 0x2000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-g12a-ao-pwm-ab"; - reg = <0x0 0x7000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = ; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x48>; - #io-channel-cells = <1>; - interrupts = ; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; - }; - - vdec: video-decoder@ff620000 { - compatible = "amlogic,g12a-vdec"; - reg = <0x0 0xff620000 0x0 0x10000>, - <0x0 0xffd0e180 0x0 0xe4>; - reg-names = "dos", "esparser"; - interrupts = , - ; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&rti>; - amlogic,canvas = <&canvas>; - - clocks = <&clkc CLKID_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>, - <&clkc CLKID_VDEC_HEVCF>; - clock-names = "dos_parser", "dos", "vdec_1", - "vdec_hevc", "vdec_hevcf"; - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; - }; - - vpu: vpu@ff900000 { - compatible = "amlogic,meson-g12a-vpu"; - reg = <0x0 0xff900000 0x0 0x100000>, - <0x0 0xff63c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; - }; - - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = ; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x1004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-g12a-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - watchdog: watchdog@f0d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0xf0d0 0x0 0x10>; - clocks = <&xtal>; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-g12a-spicc"; - reg = <0x0 0x13000 0x0 0x44>; - interrupts = ; - clocks = <&clkc CLKID_SPICC0>, - <&clkc CLKID_SPICC0_SCLK>; - clock-names = "core", "pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-g12a-spicc"; - reg = <0x0 0x15000 0x0 0x44>; - interrupts = ; - clocks = <&clkc CLKID_SPICC1>, - <&clkc CLKID_SPICC1_SCLK>; - clock-names = "core", "pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spifc: spi@14000 { - compatible = "amlogic,meson-gxbb-spifc"; - status = "disabled"; - reg = <0x0 0x14000 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_CLK81>; - }; - - pwm_ef: pwm@19000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x19000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-g12a-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x22000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - fifo-size = <128>; - }; - }; - - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = ; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - }; - - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = ; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = ; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - - usb: usb@ffe09000 { - status = "disabled"; - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = ; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = ; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb2_phy1>; - phy-names = "usb2-phy"; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = ; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment = <0x20>; - snps,parkmode-disable-ss-quirk; - }; - }; - - mali: gpu@ffe40000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0x0 0xffe40000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = , - , - ; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - operating-points-v2 = <&gpu_opp_table>; - #cooling-cells = <2>; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay = <1000>; - polling-delay-passive = <100>; - thermal-sensors = <&cpu_temp>; - - trips { - cpu_passive: cpu-passive { - temperature = <85000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <95000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - }; - - ddr_thermal: ddr-thermal { - polling-delay = <1000>; - polling-delay-passive = <100>; - thermal-sensors = <&ddr_temp>; - - trips { - ddr_passive: ddr-passive { - temperature = <85000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ddr_critical: ddr-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&ddr_passive>; - cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - arm,no-tick-in-suspend; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - -}; diff --git a/arch/arm/dts/meson-g12.dtsi b/arch/arm/dts/meson-g12.dtsi deleted file mode 100644 index 6a1f4dcf64..0000000000 --- a/arch/arm/dts/meson-g12.dtsi +++ /dev/null @@ -1,385 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Jerome Brunet - */ - -#include "meson-g12-common.dtsi" -#include -#include -#include -#include - -/ { - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; -}; - -&apb { - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - resets = <&clkc_audio AUD_RESET_PDM>; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>, - <&clkc_audio AUD_RESET_TODDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>, - <&clkc_audio AUD_RESET_TODDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>, - <&clkc_audio AUD_RESET_TODDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>, - <&clkc_audio AUD_RESET_FRDDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>, - <&clkc_audio AUD_RESET_FRDDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>, - <&clkc_audio AUD_RESET_FRDDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - resets = <&clkc_audio AUD_RESET_SPDIFIN>; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT>; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; - status = "disabled"; - }; - - toacodec: audio-controller@740 { - compatible = "amlogic,g12a-toacodec"; - reg = <0x0 0x740 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOACODEC"; - resets = <&clkc_audio AUD_RESET_TOACODEC>; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - resets = <&clkc_audio AUD_RESET_TOHDMITX>; - status = "disabled"; - }; - }; -}; - -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -}; - -&simplefb_cvbs { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&simplefb_hdmi { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - diff --git a/arch/arm/dts/meson-g12a-radxa-zero.dts b/arch/arm/dts/meson-g12a-radxa-zero.dts deleted file mode 100644 index e3bb6df42f..0000000000 --- a/arch/arm/dts/meson-g12a-radxa-zero.dts +++ /dev/null @@ -1,405 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include -#include - -/ { - compatible = "radxa,zero", "amlogic,g12a"; - model = "Radxa Zero"; - - aliases { - serial0 = &uart_AO; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - cvbs-connector { - status = "disabled"; - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - hdmi_pw: regulator-hdmi_pw { - compatible = "regulator-fixed"; - regulator-name = "HDMI_PW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&ao_5v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "RADXA-ZERO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_pw>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "disabled"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts deleted file mode 100644 index 81269ccc24..0000000000 --- a/arch/arm/dts/meson-g12a-sei510.dts +++ /dev/null @@ -1,566 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include -#include -#include -#include - -/ { - compatible = "seirobotics,sei510", "amlogic,g12a"; - model = "SEI Robotics SEI510"; - - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-onoff { - label = "On/Off"; - linux,code = ; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - mono_dac: audio-codec-0 { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - sound-name-prefix = "U16"; - sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; - }; - - dmics: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <2>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddao_3v3_t: regultor-vddao_3v3_t { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3_T"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddio_ao1v8: regulator-vddio_ao1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "SEI510"; - audio-aux-devs = <&tdmout_a>, <&tdmout_b>, - <&tdmin_a>, <&tdmin_b>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TDMIN_B IN 0", "TDM_A Capture", - "TDMIN_B IN 3", "TDM_A Loopback", - "TDMIN_A IN 1", "TDM_B Capture", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* internal speaker interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&mono_dac>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* 8ch hdmi interface */ - dai-link-7 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* internal digital mics */ - dai-link-8 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - - /* hdmi glue */ - dai-link-9 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pdm { - pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, - <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, - <&pdm_dclk_z_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_ao1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_a { - pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - vbat-supply = <&vddao_3v3>; - vddio-supply = <&vddio_ao1v8>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts deleted file mode 100644 index a26bfe7255..0000000000 --- a/arch/arm/dts/meson-g12a-u200.dts +++ /dev/null @@ -1,308 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include -#include - -/ { - compatible = "amlogic,u200", "amlogic,g12a"; - model = "Amlogic Meson G12A U200 Development Board"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -/* i2c Touch */ -&i2c0 { - status = "okay"; - pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; - pinctrl-names = "default"; -}; - -/* i2c CM */ -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; - pinctrl-names = "default"; -}; - -/* i2c Audio */ -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc_5v>; -}; diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi deleted file mode 100644 index 7677764eee..0000000000 --- a/arch/arm/dts/meson-g12a.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -#include "meson-g12.dtsi" - -/ { - compatible = "amlogic,g12a"; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - cpu_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <731000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <761000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <791000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <831000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <861000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <981000>; - }; - }; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&pmu { - compatible = "amlogic,g12a-ddr-pmu"; -}; diff --git a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts deleted file mode 100644 index 31365316b2..0000000000 --- a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-bananapi.dtsi" - -/ { - compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b"; - model = "BananaPi M2S"; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - }; -}; - -/* Camera (CSI) bus */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; - pinctrl-names = "default"; -}; - -/* Display (DSI) bus */ -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; diff --git a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts b/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts deleted file mode 100644 index 124a809010..0000000000 --- a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include "meson-khadas-vim3.dtsi" -#include "meson-g12b-khadas-vim3.dtsi" - -/ { - compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; -}; - -/* - * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential - * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between - * an USB3.0 Type A connector and a M.2 Key M slot. - * The PHY driving these differential lines is shared between - * the USB3.0 controller and the PCIe Controller, thus only - * a single controller can use it. - * If the MCU is configured to mux the PCIe/USB3.0 differential lines - * to the M.2 Key M slot, uncomment the following block to disable - * USB3.0 from the USB Complex and enable the PCIe controller. - * The End User is not expected to uncomment the following except for - * testing purposes, but instead rely on the firmware/bootloader to - * update these nodes accordingly if PCIe mode is selected by the MCU. - */ -/* -&pcie { - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; - */ diff --git a/arch/arm/dts/meson-g12b-a311d.dtsi b/arch/arm/dts/meson-g12b-a311d.dtsi deleted file mode 100644 index d61f43052a..0000000000 --- a/arch/arm/dts/meson-g12b-a311d.dtsi +++ /dev/null @@ -1,149 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include "meson-g12b.dtsi" - -/ { - cpu_opp_table_0: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <761000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <781000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <811000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <861000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <901000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <951000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1001000>; - }; - }; - - cpub_opp_table_1: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <751000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <771000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <771000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <781000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <791000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <831000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <861000>; - }; - - opp-2016000000 { - opp-hz = /bits/ 64 <2016000000>; - opp-microvolt = <911000>; - }; - - opp-2108000000 { - opp-hz = /bits/ 64 <2108000000>; - opp-microvolt = <951000>; - }; - - opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-microvolt = <1011000>; - }; - }; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts deleted file mode 100644 index 1b0c3881c6..0000000000 --- a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Neil Armstrong - */ - -/dts-v1/; - -#include "meson-g12b-bananapi-cm4.dtsi" -#include -#include -#include - -/ { - compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; - model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; - - aliases { - ethernet0 = ðmac; - i2c0 = &i2c1; - i2c1 = &i2c3; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - hdmi_connector: hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-green { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-CM4IO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&cecb_AO { - status = "okay"; -}; - -ðmac { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* CSI port */ -&i2c1 { - status = "okay"; -}; - -/* DSI port for touchscreen */ -&i2c3 { - status = "okay"; -}; - -/* miniPCIe port with USB + SIM slot */ -&pcie { - status = "okay"; -}; - -&sd_emmc_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -/* Peripheral Only USB-C port */ -&usb { - dr_mode = "peripheral"; - - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi b/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi deleted file mode 100644 index 97e522921b..0000000000 --- a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi +++ /dev/null @@ -1,388 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Neil Armstrong - */ - -#include "meson-g12b-a311d.dtsi" -#include - -/ { - aliases { - serial0 = &uart_AO; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - emmc_1v8: regulator-emmc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc-in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio-c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -/* Ethernet to be enabled in baseboard DT */ -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -/* HDMI to be enabled in baseboard DT */ -&hdmi_tx { - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -/* "Camera" I2C bus */ -&i2c1 { - pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; - pinctrl-names = "default"; -}; - -/* Main I2C bus */ -&i2c2 { - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; -}; - -/* "ID" I2C bus */ -&i2c3 { - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&pcie { - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - - status = "okay"; -}; - -&saradc { - vref-supply = <&vddao_1v8>; - - status = "okay"; -}; - -/* on-module SDIO WiFi */ -&sd_emmc_a { - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - sd-uhs-sdr104; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; - - status = "okay"; - - rtl8822cs: wifi@1 { - reg = <1>; - }; -}; - -/* SD card to be enabled in baseboard DT */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_c>; -}; - -/* on-module eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -/* on-module UART BT */ -&uart_A { - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; - device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi.dtsi b/arch/arm/dts/meson-g12b-bananapi.dtsi deleted file mode 100644 index 83709787eb..0000000000 --- a/arch/arm/dts/meson-g12b-bananapi.dtsi +++ /dev/null @@ -1,521 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2023 Christian Hewitt - */ - -#include -#include -#include -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */ - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "RST"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-min-state = <0>; - cooling-max-state = <3>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - dc_in: regulator-dc-in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc-5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - compatible = "pwm-regulator"; - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - pwm-supply = <&dc_in>; - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - compatible = "pwm-regulator"; - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - pwm-supply = <&vsys_3v3>; - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - regulator-boot-on; - regulator-always-on; - }; - - vsys_3v3: regulator-vsys-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VSYS_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb-pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M2S"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* Main i2c bus */ -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; -}; - -&pcie { - status = "okay"; - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pwm_cd { - status = "okay"; - pinctrl-0 = <&pwm_d_x6_pins>; - pinctrl-names = "default"; - pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - /* enable if WiFi/BT board connected */ - status = "disabled"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - sd-uhs-sdr104; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vddao_1v8>; - - rtl8822cs: wifi@1 { - reg = <1>; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vsys_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - /* enable if WiFi/BT board connected */ - status = "disabled"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; - device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr>; -}; - -&usb3_pcie_phy { - phy-supply = <&usb_pwr>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; diff --git a/arch/arm/dts/meson-g12b-gsking-x.dts b/arch/arm/dts/meson-g12b-gsking-x.dts deleted file mode 100644 index 6c7bfacbad..0000000000 --- a/arch/arm/dts/meson-g12b-gsking-x.dts +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include -#include - -/ { - compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GS-King X"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GSKING-X"; - audio-aux-devs = <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1", - "TDMOUT_A IN 1", "FRDDR_B OUT 1", - "TDMOUT_A IN 2", "FRDDR_C OUT 1", - "TDM_A Playback", "TDMOUT_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&tdmif_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-gtking-pro.dts b/arch/arm/dts/meson-g12b-gtking-pro.dts deleted file mode 100644 index 707daf9278..0000000000 --- a/arch/arm/dts/meson-g12b-gtking-pro.dts +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include - -/ { - compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GT-King Pro"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-white { - label = "power:white"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GTKING-PRO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-gtking.dts b/arch/arm/dts/meson-g12b-gtking.dts deleted file mode 100644 index 5d96c14490..0000000000 --- a/arch/arm/dts/meson-g12b-gtking.dts +++ /dev/null @@ -1,163 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include - -/ { - compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GT-King"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - spdif_dit: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GTKING"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* spdif hdmi or toslink interface */ - dai-link-4 { - sound-dai = <&spdifout>; - - codec-0 { - sound-dai = <&spdif_dit>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; - }; - }; - - /* spdif hdmi interface */ - dai-link-5 { - sound-dai = <&spdifout_b>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-6 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&spdifout { - pinctrl-0 = <&spdif_out_h_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&spdifout_b { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi deleted file mode 100644 index f42cf4b8af..0000000000 --- a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi +++ /dev/null @@ -1,107 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/ { - model = "Khadas VIM3"; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8030DEC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&vsys_3v3>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts b/arch/arm/dts/meson-g12b-odroid-go-ultra.dts deleted file mode 100644 index 1e40709610..0000000000 --- a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts +++ /dev/null @@ -1,722 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Neil Armstrong - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include -#include -#include -#include -#include - -/ { - compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-GO-Ultra"; - - aliases { - serial0 = &uart_AO; - rtc0 = &vrtc; - }; - - adc-joystick-left { - compatible = "adc-joystick"; - io-channels = <&saradc 2>, <&saradc 3>; - poll-interval = <10>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - linux,code = ; - abs-range = <3150 950>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - axis@1 { - reg = <1>; - linux,code = ; - abs-range = <700 2900>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - }; - - adc-joystick-right { - compatible = "adc-joystick"; - io-channels = <&saradc 0>, <&saradc 1>; - poll-interval = <10>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - linux,code = ; - abs-range = <3150 950>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - axis@1 { - reg = <1>; - linux,code = ; - abs-range = <800 3000>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - codec_clk: codec-clk { - compatible = "fixed-clock"; - clock-frequency = <12288000>; - clock-output-names = "codec_clk"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <10>; - pinctrl-0 = <&keypad_gpio_pins>; - pinctrl-names = "default"; - - volume-up-button { - label = "VOLUME-UP"; - linux,code = ; - gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>; - }; - volume-down-button { - label = "VOLUME-DOWN"; - linux,code = ; - gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>; - }; - dpad-up-button { - label = "DPAD-UP"; - linux,code = ; - gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>; - }; - dpad-down-button { - label = "DPAD-DOWN"; - linux,code = ; - gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>; - }; - dpad-left-button { - label = "DPAD-LEFT"; - linux,code = ; - gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>; - }; - dpad-right-button { - label = "DPAD-RIGHT"; - linux,code = ; - gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>; - }; - a-button { - label = "A"; - linux,code = ; - gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>; - }; - b-button { - label = "B"; - linux,code = ; - gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>; - }; - y-button { - label = "Y"; - linux,code = ; - gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - }; - x-button { - label = "X"; - linux,code = ; - gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - }; - f1-button { - label = "F1"; - linux,code = ; - gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>; - }; - f2-button { - label = "F2"; - linux,code = ; - gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; - }; - f3-button { - label = "F3"; - linux,code = ; - gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>; - }; - f4-button { - label = "F4"; - linux,code = ; - gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>; - }; - f5-button { - label = "F5"; - linux,code = ; - gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>; - }; - f6-button { - label = "F6"; - linux,code = ; - gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>; - }; - top-left-button { - label = "TOP Left"; - linux,code = ; - gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>; - }; - top-left2-button { - label = "TOP Left 2"; - linux,code = ; - gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; - }; - top-right-button { - label = "TOP Right"; - linux,code = ; - gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>; - }; - top-right2-button { - label = "TOP Right 2"; - linux,code = ; - gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - vdd_sys: regulator-vdd-sys { - compatible = "regulator-fixed"; - regulator-name = "VDD_SYS"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "Odroid GO Ultra"; - audio-widgets = "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Internal Speakers"; - audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 1", "TDMIN_B OUT", - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker Amplifier INL", "HPOL", - "Speaker Amplifier INR", "HPOR", - "Internal Speakers", "Speaker Amplifier OUTL", - "Internal Speakers", "Speaker Amplifier OUTR"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&toddr_a>; - }; - - dai-link-2 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&rk817>; - }; - }; - }; - - speaker_amp: speaker-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "Speaker Amplifier"; - VCC-supply = <&hp_5v>; - }; -}; - -&arb { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -/* RK817 only supports 12.5mV steps, round up the values */ -&cpu_opp_table_0 { - opp-1000000000 { - opp-microvolt = <737500>; - }; - opp-1200000000 { - opp-microvolt = <737500>; - }; - opp-1398000000 { - opp-microvolt = <762500>; - }; - opp-1512000000 { - opp-microvolt = <800000>; - }; - opp-1608000000 { - opp-microvolt = <837500>; - }; - opp-1704000000 { - opp-microvolt = <862500>; - }; - opp-1896000000 { - opp-microvolt = <987500>; - }; - opp-1992000000 { - opp-microvolt = <1012500>; - }; -}; - -/* RK818 only supports 12.5mV steps, round up the values */ -&cpub_opp_table_1 { - opp-1000000000 { - opp-microvolt = <775000>; - }; - opp-1200000000 { - opp-microvolt = <775000>; - }; - opp-1398000000 { - opp-microvolt = <800000>; - }; - opp-1512000000 { - opp-microvolt = <825000>; - }; - opp-1608000000 { - opp-microvolt = <862500>; - }; - opp-1704000000 { - opp-microvolt = <900000>; - }; - opp-1800000000 { - opp-microvolt = <987500>; - }; - opp-1908000000 { - opp-microvolt = <1025000>; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; - pinctrl-names = "default"; - - rk818: pmic@1c { - compatible = "rockchip,rk818"; - reg = <0x1c>; - interrupt-parent = <&gpio_intc>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ - - vcc1-supply = <&vdd_sys>; - vcc2-supply = <&vdd_sys>; - vcc3-supply = <&vdd_sys>; - vcc4-supply = <&vdd_sys>; - vcc6-supply = <&vdd_sys>; - vcc7-supply = <&vcc_2v3>; - vcc8-supply = <&vcc_2v3>; - vcc9-supply = <&vddao_3v3>; - boost-supply = <&vdd_sys>; - switch-supply = <&vdd_sys>; - - regulators { - vddcpu_a: DCDC_REG1 { - regulator-name = "vddcpu_a"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <775000>; - regulator-max-microvolt = <1025000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <775000>; - }; - }; - - vdd_ee: DCDC_REG2 { - regulator-name = "vdd_ee"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1250000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <875000>; - }; - }; - - vddq_1v1: DCDC_REG3 { - regulator-name = "vddq_1v1"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vddao_3v3: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vddao_3v3"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - hp_5v: DCDC_BOOST { - regulator-always-on; - regulator-boot-on; - regulator-name = "hp_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vddio_ao1v8: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vddio_ao1v8"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vddq_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vddq_1v8"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vddio_c: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vddio_c"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: SWITCH_REG { - regulator-name = "vcc_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - OTG_SWITCH { - regulator-name = "otg_switch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio_intc>; - - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */ - - vcc1-supply = <&vdd_sys>; - vcc2-supply = <&vdd_sys>; - vcc3-supply = <&vdd_sys>; - vcc4-supply = <&vdd_sys>; - vcc5-supply = <&vdd_sys>; - vcc6-supply = <&vdd_sys>; - vcc7-supply = <&vdd_sys>; - vcc8-supply = <&vdd_sys>; - vcc9-supply = <&rk817_boost>; - - #sound-dai-cells = <0>; - clocks = <&codec_clk>; - clock-names = "mclk"; - - #clock-cells = <1>; - - regulators { - vddcpu_b: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <737500>; - regulator-max-microvolt = <1012500>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vddcpu_b"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_2v3: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <2400000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_2v3"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vdd_codec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_lcd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk817_boost: BOOST { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5400000>; - regulator-name = "rk817_boost"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - usb_host: OTG_SWITCH { - regulator-name = "usb_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&clkc_audio { - status = "okay"; -}; - -ð_phy { - status = "disabled"; -}; - -&frddr_a { - status = "okay"; -}; - -&periphs_pinctrl { - keypad_gpio_pins: keypad-gpio { - mux { - groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", - "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7", - "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11", - "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", - "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19"; - function = "gpio_periphs"; - bias-pull-up; - output-disable; - }; - }; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vddio_c>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vddio_ao1v8>; -}; - - -&tdmif_b { - pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; - -&usb2_phy0 { - status = "okay"; -}; - -&usb2_phy1 { - status = "okay"; - phy-supply = <&usb_host>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts deleted file mode 100644 index ce1198ad34..0000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-odroid-n2.dtsi" - -/ { - compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2Plus"; -}; - -&vddcpu_a { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_ab 0 1500 0>; -}; - -&vddcpu_b { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_AO_cd 1 1500 0>; -}; - diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts deleted file mode 100644 index a198a91259..0000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2.dts +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include "meson-g12b-odroid-n2.dtsi" - -/ { - compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2"; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dtsi b/arch/arm/dts/meson-g12b-odroid-n2.dtsi deleted file mode 100644 index 24d0442dff..0000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2.dtsi +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include "meson-g12b-odroid.dtsi" - -/ { - aliases { - rtc0 = &rtc; - }; - - dio2133: audio-amplifier-0 { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - VCC-supply = <&vcc_5v>; - sound-name-prefix = "U19"; - status = "okay"; - }; - - hub_5v: regulator-hub_5v { - compatible = "regulator-fixed"; - regulator-name = "HUB_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the Hub CHIPENABLE, LOW sets low power state */ - gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "ODROID-N2"; - audio-widgets = "Line", "Lineout"; - audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, - <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, - <&dio2133>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_LB IN 1", "TDM_B Loopback", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 5", "TDM_C Loopback", - "TDMIN_LB IN 2", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT", - "U19 INL", "ACODEC LOLP", - "U19 INR", "ACODEC LORP", - "Lineout", "U19 OUTL", - "Lineout", "U19 OUTR"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_B>; - }; - }; - - /* i2s jack output interface */ - dai-link-7 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_C>; - }; - }; - - /* hdmi glue */ - dai-link-8 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - - /* acodec glue */ - dai-link-9 { - sound-dai = <&toacodec TOACODEC_OUT>; - - codec { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddao_1v8>; - status = "okay"; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", "", "", "", - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "PIN_44", /* GPIOA_0 */ - "PIN_46", /* GPIOA_1 */ - "PIN_45", /* GPIOA_2 */ - "PIN_47", /* GPIOA_3 */ - "PIN_26", /* GPIOA_4 */ - "", "", "", "", "", "", - "PIN_42", /* GPIOA_11 */ - "PIN_32", /* GPIOA_12 */ - "PIN_7", /* GPIOA_13 */ - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_33", /* GPIOX_5 */ - "PIN_35", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_36"; /* GPIOX_19 */ - /* - * WARNING: The USB Hub on the Odroid-N2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = ; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-odroid"; -}; - -/* - * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins - * and eMMC Data 4 to 7 pins. - * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, - * and change bus-width to 4 then spifc can be enabled. - * The SW1 slide should also be set to the correct position. - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - mx25u64: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25u6435f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&toacodec { - status = "okay"; -}; - -&usb { - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&hub_5v>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2l.dts b/arch/arm/dts/meson-g12b-odroid-n2l.dts deleted file mode 100644 index 70919f40d5..0000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2l.dts +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Dongjin Kim - */ - -/dts-v1/; - -/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2L"; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "ODROID-N2L"; - audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, - <&tdmin_c>, <&tdmin_lb>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_LB IN 1", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-7 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -ð_phy { - status = "disabled"; -}; - -&vddcpu_a { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_ab 0 1500 0>; -}; - -&vddcpu_b { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_AO_cd 1 1500 0>; -}; - -&usb2_phy0 { - phy-supply = <&usb_pwr_en>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr_en>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid.dtsi b/arch/arm/dts/meson-g12b-odroid.dtsi deleted file mode 100644 index 9e12a34b28..0000000000 --- a/arch/arm/dts/meson-g12b-odroid.dtsi +++ /dev/null @@ -1,445 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include -#include -#include -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>; - /* Using Dummy Speed */ - gpio-fan,speed-map = <0 0>, <1 1>; - #cooling-cells = <2>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - label = "n2:blue"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu_thermal { - trips { - cpu_active: cpu-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ddr_thermal { - trips { - ddr_active: ddr-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&ddr_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; diff --git a/arch/arm/dts/meson-g12b-radxa-zero2.dts b/arch/arm/dts/meson-g12b-radxa-zero2.dts deleted file mode 100644 index 890f5bfebb..0000000000 --- a/arch/arm/dts/meson-g12b-radxa-zero2.dts +++ /dev/null @@ -1,489 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - * Copyright (c) 2022 Radxa Limited - * Author: Yuntian Zhang - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include -#include -#include -#include - -/ { - compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b"; - model = "Radxa Zero2"; - - aliases { - serial0 = &uart_AO; - serial2 = &uart_A; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - ao_5v: regulator-ao-5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&ao_5v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&ao_5v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "RADXA-ZERO2"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: clock-0 { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23", - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "EMMC_PWRSEQ", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "SD_CD", "PIN_36", - /* GPIOA */ - "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "", - "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5", - /* GPIOX */ - "", "", "", "", "", "", "SDIO_PWRSEQ", "", - "", "", "", "", "", "", "", "", - "", "BT_SHUTDOWN", "", ""; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29", - "PIN_33", "PIN_37", "FAN", "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&ao_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "disabled"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_ab { - pinctrl-0 = <&pwm_ao_a_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts deleted file mode 100644 index 7f66f263a2..0000000000 --- a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include "meson-g12b-bananapi.dtsi" - -/ { - compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b"; - model = "BananaPi M2S"; -}; diff --git a/arch/arm/dts/meson-g12b-s922x.dtsi b/arch/arm/dts/meson-g12b-s922x.dtsi deleted file mode 100644 index 1e5d0ee5d5..0000000000 --- a/arch/arm/dts/meson-g12b-s922x.dtsi +++ /dev/null @@ -1,139 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include "meson-g12b.dtsi" - -/ { - cpu_opp_table_0: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <731000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <761000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <791000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <831000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <861000>; - }; - - opp-1896000000 { - opp-hz = /bits/ 64 <1896000000>; - opp-microvolt = <981000>; - }; - - opp-1992000000 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1001000>; - }; - }; - - cpub_opp_table_1: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <751000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <751000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <751000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <751000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <771000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <771000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <791000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <821000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <861000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <891000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <981000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <1022000>; - }; - }; -}; diff --git a/arch/arm/dts/meson-g12b-w400.dtsi b/arch/arm/dts/meson-g12b-w400.dtsi deleted file mode 100644 index feb0885047..0000000000 --- a/arch/arm/dts/meson-g12b-w400.dtsi +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-g12b.dtsi" -#include "meson-g12b-s922x.dtsi" -#include -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP1653 Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * MP1652 Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - usb1_pow: regulator-usb1-pow { - compatible = "regulator-fixed"; - regulator-name = "USB1_POW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* connected to SY6280A Power Switch */ - gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - usb_pwr_en: regulator-usb-pwr-en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to USB3 Type-A Port power enable */ - gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <100000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&usb1_pow>; -}; - -&usb2_phy1 { - phy-supply = <&usb1_pow>; -}; diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi deleted file mode 100644 index 75ff00fb2e..0000000000 --- a/arch/arm/dts/meson-g12b.dtsi +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include "meson-g12.dtsi" - -/ { - compatible = "amlogic,g12b"; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu100>; - }; - - core1 { - cpu = <&cpu101>; - }; - - core2 { - cpu = <&cpu102>; - }; - - core3 { - cpu = <&cpu103>; - }; - }; - }; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <592>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - capacity-dmips-mhz = <592>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu100: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu101: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu102: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x102>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu103: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x103>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; -}; - -&clkc { - compatible = "amlogic,g12b-clkc"; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&mali { - dma-coherent; -}; - -&pmu { - compatible = "amlogic,g12b-ddr-pmu"; -}; diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi deleted file mode 100644 index 3cf4ecb6d5..0000000000 --- a/arch/arm/dts/meson-khadas-vim3.dtsi +++ /dev/null @@ -1,534 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - * Copyright (c) 2019 Christian Hewitt - */ - -#include -#include -#include -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-white { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-red { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vsys_3v3: regulator-vsys_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VSYS_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - - sound { - compatible = "amlogic,axg-sound-card"; - model = "KHADAS-VIM3"; - audio-aux-devs = <&tdmin_a>, <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* hdmi glue */ - dai-link-7 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu_thermal { - trips { - cpu_active: cpu-active { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_active>; - cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; - pinctrl-names = "default"; - - khadas_mcu: system-controller@18 { - compatible = "khadas,mcu"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - gpio_expander: gpio-controller@20 { - compatible = "ti,tca6408"; - reg = <0x20>; - vcc-supply = <&vcc_3v3>; - gpio-controller; - #gpio-cells = <2>; - }; - - rtc: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-khadas"; -}; - -&pcie { - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vsys_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -/* - * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS - * and eMMC Data 4 to 7 pins. - * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, - * and change bus-width to 4 then spifc can be enabled. - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q128: spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128fw", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&tdmif_a { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr>; -}; - -&usb3_pcie_phy { - phy-supply = <&usb_pwr>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts b/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts deleted file mode 100644 index 586034316e..0000000000 --- a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -#include "meson-sm1-bananapi.dtsi" -#include - -/ { - compatible = "bananapi,bpi-m2-pro", "amlogic,sm1"; - model = "Banana Pi BPI-M2-PRO"; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M2-PRO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi-m5.dts b/arch/arm/dts/meson-sm1-bananapi-m5.dts deleted file mode 100644 index f045bf8516..0000000000 --- a/arch/arm/dts/meson-sm1-bananapi-m5.dts +++ /dev/null @@ -1,221 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -#include "meson-sm1-bananapi.dtsi" -#include -#include - -/ { - compatible = "bananapi,bpi-m5", "amlogic,sm1"; - model = "Banana Pi BPI-M5"; - - /* TOFIX: handle CVBS_DET on SARADC channel 0 */ - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M5"; - audio-widgets = "Line", "Lineout"; - audio-aux-devs = <&tdmout_b>, <&tdmout_c>, - <&tdmin_a>, <&tdmin_b>, <&tdmin_c>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 5", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "Lineout", "ACODEC LOLP", - "Lineout", "ACODEC LORP"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_B>; - }; - }; - - /* i2s jack output interface */ - dai-link-7 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_C>; - }; - }; - - /* hdmi glue */ - dai-link-8 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - - /* acodec glue */ - dai-link-9 { - sound-dai = <&toacodec TOACODEC_OUT>; - - codec { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddao_1v8>; - status = "okay"; -}; - - -&clkc_audio { - status = "okay"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&toacodec { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi.dtsi b/arch/arm/dts/meson-sm1-bananapi.dtsi deleted file mode 100644 index 17045ff81c..0000000000 --- a/arch/arm/dts/meson-sm1-bananapi.dtsi +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong - */ - -#include "meson-sm1.dtsi" -#include -#include -#include - -/ { - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-sw3 { - label = "SW3"; - linux,code = ; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key { - label = "SW1"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio_c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - /* USB Hub Power Enable */ - vl_pwr_en: regulator-vl_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "VL_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&arb { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "ETH_MDIO", /* GPIOZ_0 */ - "ETH_MDC", /* GPIOZ_1 */ - "ETH_RXCLK", /* GPIOZ_2 */ - "ETH_RX_DV", /* GPIOZ_3 */ - "ETH_RXD0", /* GPIOZ_4 */ - "ETH_RXD1", /* GPIOZ_5 */ - "ETH_RXD2", /* GPIOZ_6 */ - "ETH_RXD3", /* GPIOZ_7 */ - "ETH_TXCLK", /* GPIOZ_8 */ - "ETH_TXEN", /* GPIOZ_9 */ - "ETH_TXD0", /* GPIOZ_10 */ - "ETH_TXD1", /* GPIOZ_11 */ - "ETH_TXD2", /* GPIOZ_12 */ - "ETH_TXD3", /* GPIOZ_13 */ - "ETH_INTR", /* GPIOZ_14 */ - "ETH_NRST", /* GPIOZ_15 */ - /* GPIOH */ - "HDMI_SDA", /* GPIOH_0 */ - "HDMI_SCL", /* GPIOH_1 */ - "HDMI_HPD", /* GPIOH_2 */ - "HDMI_CEC", /* GPIOH_3 */ - "VL-RST_N", /* GPIOH_4 */ - "CON1-P36", /* GPIOH_5 */ - "VL-PWREN", /* GPIOH_6 */ - "WiFi_3V3_1V8", /* GPIOH_7 */ - "TFLASH_VDD_EN", /* GPIOH_8 */ - /* BOOT */ - "eMMC_D0", /* BOOT_0 */ - "eMMC_D1", /* BOOT_1 */ - "eMMC_D2", /* BOOT_2 */ - "eMMC_D3", /* BOOT_3 */ - "eMMC_D4", /* BOOT_4 */ - "eMMC_D5", /* BOOT_5 */ - "eMMC_D6", /* BOOT_6 */ - "eMMC_D7", /* BOOT_7 */ - "eMMC_CLK", /* BOOT_8 */ - "", - "eMMC_CMD", /* BOOT_10 */ - "", - "eMMC_RST#", /* BOOT_12 */ - "eMMC_DS", /* BOOT_13 */ - "", "", - /* GPIOC */ - "SD_D0_B", /* GPIOC_0 */ - "SD_D1_B", /* GPIOC_1 */ - "SD_D2_B", /* GPIOC_2 */ - "SD_D3_B", /* GPIOC_3 */ - "SD_CLK_B", /* GPIOC_4 */ - "SD_CMD_B", /* GPIOC_5 */ - "CARD_EN_DET", /* GPIOC_6 */ - "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "CON1-P27", /* GPIOA_14 */ - "CON1-P28", /* GPIOA_15 */ - /* GPIOX */ - "CON1-P16", /* GPIOX_0 */ - "CON1-P18", /* GPIOX_1 */ - "CON1-P22", /* GPIOX_2 */ - "CON1-P11", /* GPIOX_3 */ - "CON1-P13", /* GPIOX_4 */ - "CON1-P07", /* GPIOX_5 */ - "CON1-P33", /* GPIOX_6 */ - "CON1-P15", /* GPIOX_7 */ - "CON1-P19", /* GPIOX_8 */ - "CON1-P21", /* GPIOX_9 */ - "CON1-P24", /* GPIOX_10 */ - "CON1-P23", /* GPIOX_11 */ - "CON1-P08", /* GPIOX_12 */ - "CON1-P10", /* GPIOX_13 */ - "CON1-P29", /* GPIOX_14 */ - "CON1-P31", /* GPIOX_15 */ - "CON1-P26", /* GPIOX_16 */ - "CON1-P03", /* GPIOX_17 */ - "CON1-P05", /* GPIOX_18 */ - "CON1-P32"; /* GPIOX_19 */ - - /* - * WARNING: The USB Hub needs a reset signal to be turned high in - * order to be detected by the USB Controller. This signal should - * be handled by a USB specific power sequence to reset the Hub - * when the USB bus is powered down. - */ - usb-hub-hog { - gpio-hog; - gpios = ; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "DEBUG TX", /* GPIOAO_0 */ - "DEBUG RX", /* GPIOAO_1 */ - "SYS_LED2", /* GPIOAO_2 */ - "UPDATE_KEY", /* GPIOAO_3 */ - "CON1-P40", /* GPIOAO_4 */ - "IR_IN", /* GPIOAO_5 */ - "TF_3V3N_1V8_EN", /* GPIOAO_6 */ - "CON1-P35", /* GPIOAO_7 */ - "CON1-P12", /* GPIOAO_8 */ - "CON1-P37", /* GPIOAO_9 */ - "CON1-P38", /* GPIOAO_10 */ - "SYS_LED", /* GPIOAO_11 */ - /* GPIOE */ - "VDDEE_PWM", /* GPIOE_0 */ - "VDDCPU_PWM", /* GPIOE_1 */ - "TF_PWR_EN"; /* GPIOE_2 */ -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - /* TOFIX: SD card is barely usable in SDR modes */ - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&vddio_c>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&vl_pwr_en>; -}; diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts deleted file mode 100644 index f2c0981435..0000000000 --- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -#include "meson-sm1.dtsi" -#include "meson-khadas-vim3.dtsi" -#include - -/ { - compatible = "khadas,vim3l", "amlogic,sm1"; - model = "Khadas VIM3L"; - - vddcpu: regulator-vddcpu { - /* - * Silergy SY8030DEC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&vsys_3v3>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - model = "G12B-KHADAS-VIM3L"; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 13", "TDM_A Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT"; - }; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -/* - * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential - * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between - * an USB3.0 Type A connector and a M.2 Key M slot. - * The PHY driving these differential lines is shared between - * the USB3.0 controller and the PCIe Controller, thus only - * a single controller can use it. - * If the MCU is configured to mux the PCIe/USB3.0 differential lines - * to the M.2 Key M slot, uncomment the following block to disable - * USB3.0 from the USB Complex and enable the PCIe controller. - * The End User is not expected to uncomment the following except for - * testing purposes, but instead rely on the firmware/bootloader to - * update these nodes accordingly if PCIe mode is selected by the MCU. - */ -/* -&pcie { - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; - */ - -&sd_emmc_a { - sd-uhs-sdr50; -}; diff --git a/arch/arm/dts/meson-sm1-odroid-c4.dts b/arch/arm/dts/meson-sm1-odroid-c4.dts deleted file mode 100644 index 8c30ce6368..0000000000 --- a/arch/arm/dts/meson-sm1-odroid-c4.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim - */ - -/dts-v1/; - -#include "meson-sm1-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-c4", "amlogic,sm1"; - model = "Hardkernel ODROID-C4"; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - }; - - sound { - model = "ODROID-C4"; - }; -}; - -&gpio { - /* - * WARNING: The USB Hub on the Odroid-C4 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = ; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&ir { - linux,rc-map-name = "rc-odroid"; -}; diff --git a/arch/arm/dts/meson-sm1-odroid-hc4.dts b/arch/arm/dts/meson-sm1-odroid-hc4.dts deleted file mode 100644 index f3f953225b..0000000000 --- a/arch/arm/dts/meson-sm1-odroid-hc4.dts +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim - */ - -/dts-v1/; - -#include "meson-sm1-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-hc4", "amlogic,sm1"; - model = "Hardkernel ODROID-HC4"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-min-state = <0>; - cooling-max-state = <3>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - led-red { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ - p12v_0: regulator-p12v_0 { - compatible = "regulator-fixed"; - regulator-name = "P12V_0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ - p12v_1: regulator-p12v_1 { - compatible = "regulator-fixed"; - regulator-name = "P12V_1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - sound { - model = "ODROID-HC4"; - }; -}; - -&cpu_thermal { - cooling-maps { - map { - trip = <&cpu_passive>; - cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ir { - linux,rc-map-name = "rc-odroid"; -}; - -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&pcie { - status = "okay"; - reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; -}; - -&pwm_cd { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_d_x6_pins>; -}; - -&sd_emmc_c { - status = "disabled"; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&usb { - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; -}; - -&usb2_phy0 { - status = "disabled"; -}; diff --git a/arch/arm/dts/meson-sm1-odroid.dtsi b/arch/arm/dts/meson-sm1-odroid.dtsi deleted file mode 100644 index fd0ad85c16..0000000000 --- a/arch/arm/dts/meson-sm1-odroid.dtsi +++ /dev/null @@ -1,449 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim - */ - -#include "meson-sm1.dtsi" -#include -#include -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", - "PIN_36", /* GPIOH_5 */ - "PIN_26", /* GPIOH_6 */ - "PIN_32", /* GPIOH_7 */ - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_7", /* GPIOX_5 */ - "PIN_33", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_35"; /* GPIOX_19 */ -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "", "", "", "", - "PIN_47", /* GPIOAO_4 */ - "", "", - "PIN_45", /* GPIOAO_7 */ - "PIN_46", /* GPIOAO_8 */ - "PIN_44", /* GPIOAO_9 */ - "PIN_42", /* GPIOAO_10 */ - "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <200000000>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts deleted file mode 100644 index 2194a77897..0000000000 --- a/arch/arm/dts/meson-sm1-sei610.dts +++ /dev/null @@ -1,616 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-sm1.dtsi" -#include -#include -#include -#include - -/ { - compatible = "seirobotics,sei610", "amlogic,sm1"; - model = "SEI Robotics SEI610"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - mono_dac: audio-codec-0 { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - sound-name-prefix = "U16"; - sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; - }; - - dmics: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <2>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key1 { - label = "A"; - linux,code = ; - gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <34 IRQ_TYPE_EDGE_BOTH>; - }; - - key2 { - label = "B"; - linux,code = ; - gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <35 IRQ_TYPE_EDGE_BOTH>; - }; - - key3 { - label = "C"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; - }; - - mic_mute { - label = "MicMute"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <99 IRQ_TYPE_EDGE_BOTH>; - }; - - power_key { - label = "PowerKey"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - led-controller-1 { - compatible = "gpio-leds"; - - led-1 { - label = "sei610:blue:bt"; - gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - default-state = "off"; - }; - }; - - led-controller-2 { - compatible = "pwm-leds"; - - led-2 { - label = "sei610:red:power"; - pwms = <&pwm_AO_ab 0 30518 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - active-low; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - /* Used by Tuner, RGB Led & IR Emitter LED array */ - vddao_3v3_t: regulator-vddao_3v3_t { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3_T"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1500 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddio_ao1v8: regulator-vddio_ao1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "SEI610"; - audio-aux-devs = <&tdmout_a>, <&tdmout_b>, - <&tdmin_a>, <&tdmin_b>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TDMIN_B IN 0", "TDM_A Capture", - "TDMIN_B IN 3", "TDM_A Loopback", - "TDMIN_A IN 1", "TDM_B Capture", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* internal speaker interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&mono_dac>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* 8ch hdmi interface */ - dai-link-7 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* internal digital mics */ - dai-link-8 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - - /* hdmi glue */ - dai-link-9 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pdm { - pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_ao1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_a { - pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - interrupt-parent = <&gpio_intc>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - vbat-supply = <&vddao_3v3>; - vddio-supply = <&vddio_ao1v8>; - }; -}; - -/* Exposed via the on-board USB to Serial FT232RL IC */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; -}; diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi deleted file mode 100644 index 56ca0ba224..0000000000 --- a/arch/arm/dts/meson-sm1.dtsi +++ /dev/null @@ -1,550 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#include "meson-g12-common.dtsi" -#include -#include -#include -#include - -/ { - compatible = "amlogic,sm1"; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - cpu_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <770000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <780000>; - }; - - opp-1404000000 { - opp-hz = /bits/ 64 <1404000000>; - opp-microvolt = <790000>; - }; - - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <800000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <810000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <850000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <900000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - audio: bus@60000 { - compatible = "simple-bus"; - reg = <0x0 0x60000 0x0 0x1000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,sm1-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_FCLK_DIV5>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>, - <&clkc_audio AUD_RESET_TODDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <8192>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>, - <&clkc_audio AUD_RESET_TODDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>, - <&clkc_audio AUD_RESET_TODDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>, - <&clkc_audio AUD_RESET_FRDDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>, - <&clkc_audio AUD_RESET_FRDDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>, - <&clkc_audio AUD_RESET_FRDDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-sm1-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - resets = <&clkc_audio AUD_RESET_SPDIFIN>; - status = "disabled"; - }; - - spdifout_a: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_A"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT>; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - toacodec: audio-controller@740 { - compatible = "amlogic,sm1-toacodec", - "amlogic,g12a-toacodec"; - reg = <0x0 0x740 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOACODEC"; - resets = <&clkc_audio AUD_RESET_TOACODEC>; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,sm1-tohdmitx", - "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - resets = <&clkc_audio AUD_RESET_TOHDMITX>; - status = "disabled"; - }; - - toddr_d: audio-controller@840 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x840 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_D"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_D>; - resets = <&arb AXG_ARB_TODDR_D>, - <&clkc_audio AUD_RESET_TODDR_D>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_d: audio-controller@880 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x880 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_D"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; - resets = <&arb AXG_ARB_FRDDR_D>, - <&clkc_audio AUD_RESET_FRDDR_D>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - }; - - pdm: audio-controller@61000 { - compatible = "amlogic,sm1-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x61000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - resets = <&clkc_audio AUD_RESET_PDM>; - status = "disabled"; - }; -}; - -&cecb_AO { - compatible = "amlogic,meson-sm1-ao-cec"; -}; - -&clk_msr { - compatible = "amlogic,meson-sm1-clk-measure"; -}; - - -&clkc { - compatible = "amlogic,sm1-clkc"; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -ðmac { - power-domains = <&pwrc PWRC_SM1_ETH_ID>; -}; - -&gpio_intc { - compatible = "amlogic,meson-sm1-gpio-intc", - "amlogic,meson-gpio-intc"; -}; - -&pcie { - power-domains = <&pwrc PWRC_SM1_PCIE_ID>; -}; - -&pmu { - compatible = "amlogic,sm1-ddr-pmu"; -}; - -&pwrc { - compatible = "amlogic,meson-sm1-pwrc"; -}; - -&simplefb_cvbs { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&simplefb_hdmi { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&vdec { - compatible = "amlogic,sm1-vdec"; -}; - -&vpu { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&usb { - power-domains = <&pwrc PWRC_SM1_USB_ID>; -}; diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h deleted file mode 100644 index f7bd69350d..0000000000 --- a/include/dt-bindings/gpio/meson-g12a-gpio.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - * Author: Xingyu Chen - */ - -#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H -#define _DT_BINDINGS_MESON_G12A_GPIO_H - -/* First GPIO chip */ -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOE_0 12 -#define GPIOE_1 13 -#define GPIOE_2 14 - -/* Second GPIO chip */ -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define GPIOH_4 20 -#define GPIOH_5 21 -#define GPIOH_6 22 -#define GPIOH_7 23 -#define GPIOH_8 24 -#define BOOT_0 25 -#define BOOT_1 26 -#define BOOT_2 27 -#define BOOT_3 28 -#define BOOT_4 29 -#define BOOT_5 30 -#define BOOT_6 31 -#define BOOT_7 32 -#define BOOT_8 33 -#define BOOT_9 34 -#define BOOT_10 35 -#define BOOT_11 36 -#define BOOT_12 37 -#define BOOT_13 38 -#define BOOT_14 39 -#define BOOT_15 40 -#define GPIOC_0 41 -#define GPIOC_1 42 -#define GPIOC_2 43 -#define GPIOC_3 44 -#define GPIOC_4 45 -#define GPIOC_5 46 -#define GPIOC_6 47 -#define GPIOC_7 48 -#define GPIOA_0 49 -#define GPIOA_1 50 -#define GPIOA_2 51 -#define GPIOA_3 52 -#define GPIOA_4 53 -#define GPIOA_5 54 -#define GPIOA_6 55 -#define GPIOA_7 56 -#define GPIOA_8 57 -#define GPIOA_9 58 -#define GPIOA_10 59 -#define GPIOA_11 60 -#define GPIOA_12 61 -#define GPIOA_13 62 -#define GPIOA_14 63 -#define GPIOA_15 64 -#define GPIOX_0 65 -#define GPIOX_1 66 -#define GPIOX_2 67 -#define GPIOX_3 68 -#define GPIOX_4 69 -#define GPIOX_5 70 -#define GPIOX_6 71 -#define GPIOX_7 72 -#define GPIOX_8 73 -#define GPIOX_9 74 -#define GPIOX_10 75 -#define GPIOX_11 76 -#define GPIOX_12 77 -#define GPIOX_13 78 -#define GPIOX_14 79 -#define GPIOX_15 80 -#define GPIOX_16 81 -#define GPIOX_17 82 -#define GPIOX_18 83 -#define GPIOX_19 84 - -#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */ diff --git a/include/dt-bindings/power/meson-g12a-power.h b/include/dt-bindings/power/meson-g12a-power.h deleted file mode 100644 index bb5e67a842..0000000000 --- a/include/dt-bindings/power/meson-g12a-power.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#ifndef _DT_BINDINGS_MESON_G12A_POWER_H -#define _DT_BINDINGS_MESON_G12A_POWER_H - -#define PWRC_G12A_VPU_ID 0 -#define PWRC_G12A_ETH_ID 1 - -#endif diff --git a/include/dt-bindings/power/meson-sm1-power.h b/include/dt-bindings/power/meson-sm1-power.h deleted file mode 100644 index a020ab00c1..0000000000 --- a/include/dt-bindings/power/meson-sm1-power.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#ifndef _DT_BINDINGS_MESON_SM1_POWER_H -#define _DT_BINDINGS_MESON_SM1_POWER_H - -#define PWRC_SM1_VPU_ID 0 -#define PWRC_SM1_NNA_ID 1 -#define PWRC_SM1_USB_ID 2 -#define PWRC_SM1_PCIE_ID 3 -#define PWRC_SM1_GE2D_ID 4 -#define PWRC_SM1_AUDIO_ID 5 -#define PWRC_SM1_ETH_ID 6 - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h deleted file mode 100644 index 1ef807856c..0000000000 --- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0 OR MIT) - * - * Copyright (c) 2018 Baylibre SAS. - * Author: Jerome Brunet - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H -#define _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H - -#define AXG_ARB_TODDR_A 0 -#define AXG_ARB_TODDR_B 1 -#define AXG_ARB_TODDR_C 2 -#define AXG_ARB_FRDDR_A 3 -#define AXG_ARB_FRDDR_B 4 -#define AXG_ARB_FRDDR_C 5 -#define AXG_ARB_TODDR_D 6 -#define AXG_ARB_FRDDR_D 7 - -#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h deleted file mode 100644 index f805129ca7..0000000000 --- a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Jerome Brunet - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H - -#define AUD_RESET_PDM 0 -#define AUD_RESET_TDMIN_A 1 -#define AUD_RESET_TDMIN_B 2 -#define AUD_RESET_TDMIN_C 3 -#define AUD_RESET_TDMIN_LB 4 -#define AUD_RESET_LOOPBACK 5 -#define AUD_RESET_TODDR_A 6 -#define AUD_RESET_TODDR_B 7 -#define AUD_RESET_TODDR_C 8 -#define AUD_RESET_FRDDR_A 9 -#define AUD_RESET_FRDDR_B 10 -#define AUD_RESET_FRDDR_C 11 -#define AUD_RESET_TDMOUT_A 12 -#define AUD_RESET_TDMOUT_B 13 -#define AUD_RESET_TDMOUT_C 14 -#define AUD_RESET_SPDIFOUT 15 -#define AUD_RESET_SPDIFOUT_B 16 -#define AUD_RESET_SPDIFIN 17 -#define AUD_RESET_EQDRC 18 -#define AUD_RESET_RESAMPLE 19 -#define AUD_RESET_DDRARB 20 -#define AUD_RESET_POWDET 21 -#define AUD_RESET_TORAM 22 -#define AUD_RESET_TOACODEC 23 -#define AUD_RESET_TOHDMITX 24 -#define AUD_RESET_CLKTREE 25 - -/* SM1 added resets */ -#define AUD_RESET_RESAMPLE_B 26 -#define AUD_RESET_TOVAD 27 -#define AUD_RESET_LOCKER 28 -#define AUD_RESET_SPDIFIN_LB 29 -#define AUD_RESET_FRATV 30 -#define AUD_RESET_FRHDMIRX 31 -#define AUD_RESET_FRDDR_D 32 -#define AUD_RESET_TODDR_D 33 -#define AUD_RESET_LOOPBACK_B 34 -#define AUD_RESET_EARCTX 35 -#define AUD_RESET_EARCRX 36 -#define AUD_RESET_FRDDR_E 37 -#define AUD_RESET_TODDR_E 38 - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h deleted file mode 100644 index 6d487c5eba..0000000000 --- a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Jerome Brunet - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -/* 1 */ -#define RESET_DOS 2 -/* 3-4 */ -#define RESET_VIU 5 -#define RESET_AFIFO 6 -#define RESET_VID_PLL_DIV 7 -/* 8-9 */ -#define RESET_VENC 10 -#define RESET_ASSIST 11 -#define RESET_PCIE_CTRL_A 12 -#define RESET_VCBUS 13 -#define RESET_PCIE_PHY 14 -#define RESET_PCIE_APB 15 -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -/* 18 */ -#define RESET_HDMITX_CAPB3 19 -#define RESET_DVALIN_CAPB3 20 -#define RESET_DOS_CAPB3 21 -/* 22 */ -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -/* 27-31 */ -/* RESET1 */ -/* 32 */ -#define RESET_DEMUX 33 -#define RESET_USB 34 -#define RESET_DDR 35 -/* 36 */ -#define RESET_BT656 37 -#define RESET_AHB_SRAM 38 -/* 39 */ -#define RESET_PARSER 40 -/* 41 */ -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -#define RESET_SD_EMMC_A 44 -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -/* 47 */ -#define RESET_USB_PHY20 48 -#define RESET_USB_PHY21 49 -/* 50-60 */ -#define RESET_AUDIO_CODEC 61 -/* 62-63 */ -/* RESET2 */ -/* 64 */ -#define RESET_AUDIO 65 -#define RESET_HDMITX_PHY 66 -/* 67 */ -#define RESET_MIPI_DSI_HOST 68 -#define RESET_ALOCKER 69 -#define RESET_GE2D 70 -#define RESET_PARSER_REG 71 -#define RESET_PARSER_FETCH 72 -#define RESET_CTL 73 -#define RESET_PARSER_TOP 74 -/* 75-77 */ -#define RESET_DVALIN 78 -#define RESET_HDMITX 79 -/* 80-95 */ -/* RESET3 */ -/* 96-95 */ -#define RESET_DEMUX_TOP 105 -#define RESET_DEMUX_DES_PL 106 -#define RESET_DEMUX_S2P_0 107 -#define RESET_DEMUX_S2P_1 108 -#define RESET_DEMUX_0 109 -#define RESET_DEMUX_1 110 -#define RESET_DEMUX_2 111 -/* 112-127 */ -/* RESET4 */ -/* 128-129 */ -#define RESET_MIPI_DSI_PHY 130 -/* 131-132 */ -#define RESET_RDMA 133 -#define RESET_VENCI 134 -#define RESET_VENCP 135 -/* 136 */ -#define RESET_VDAC 137 -/* 138-139 */ -#define RESET_VDI6 140 -#define RESET_VENCL 141 -#define RESET_I2C_M1 142 -#define RESET_I2C_M2 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_GEN 192 -#define RESET_SPICC0 193 -#define RESET_SC 194 -#define RESET_SANA_3 195 -#define RESET_I2C_M0 196 -#define RESET_TS_PLL 197 -#define RESET_SPICC1 198 -#define RESET_STREAM 199 -#define RESET_TS_CPU 200 -#define RESET_UART0 201 -#define RESET_UART1_2 202 -#define RESET_ASYNC0 203 -#define RESET_ASYNC1 204 -#define RESET_SPIFC0 205 -#define RESET_I2C_M3 206 -/* 207-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -#define RESET_TS_GPU 228 -#define RESET_DEVICE_MMC_ARB 229 -#define RESET_DVALIN_DMC_PIPL 230 -#define RESET_VID_LOCK 231 -#define RESET_NIC_DMC_PIPL 232 -#define RESET_DMC_VPU_PIPL 233 -#define RESET_GE2D_DMC_PIPL 234 -#define RESET_HCODEC_DMC_PIPL 235 -#define RESET_WAVE420_DMC_PIPL 236 -#define RESET_HEVCF_DMC_PIPL 237 -/* 238-255 */ - -#endif diff --git a/include/dt-bindings/sound/meson-g12a-toacodec.h b/include/dt-bindings/sound/meson-g12a-toacodec.h deleted file mode 100644 index 69d7a75592..0000000000 --- a/include/dt-bindings/sound/meson-g12a-toacodec.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_G12A_TOACODEC_H -#define __DT_MESON_G12A_TOACODEC_H - -#define TOACODEC_IN_A 0 -#define TOACODEC_IN_B 1 -#define TOACODEC_IN_C 2 -#define TOACODEC_OUT 3 - -#endif /* __DT_MESON_G12A_TOACODEC_H */ diff --git a/include/dt-bindings/sound/meson-g12a-tohdmitx.h b/include/dt-bindings/sound/meson-g12a-tohdmitx.h deleted file mode 100644 index c5e1f48d30..0000000000 --- a/include/dt-bindings/sound/meson-g12a-tohdmitx.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_G12A_TOHDMITX_H -#define __DT_MESON_G12A_TOHDMITX_H - -#define TOHDMITX_I2S_IN_A 0 -#define TOHDMITX_I2S_IN_B 1 -#define TOHDMITX_I2S_IN_C 2 -#define TOHDMITX_I2S_OUT 3 -#define TOHDMITX_SPDIF_IN_A 4 -#define TOHDMITX_SPDIF_IN_B 5 -#define TOHDMITX_SPDIF_OUT 6 - -#endif /* __DT_MESON_G12A_TOHDMITX_H */