From: Randolph <randolph@andestech.com>
Date: Fri, 29 Dec 2023 08:32:22 +0000 (+0800)
Subject: spl: riscv: falcon: move fdt blob to specified address
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=10c4ab898c251a9f8d79b525880a1751b4815350;p=u-boot.git

spl: riscv: falcon: move fdt blob to specified address

In Falcon Boot mode, the fdt blob should be move to the RAM from
kernel BSS section. To avoid being cleared by BSS initialisation.
SPL_PAYLOAD_ARGS_ADDR is the address where SPL copies.

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
---

diff --git a/board/AndesTech/ae350/ae350.c b/board/AndesTech/ae350/ae350.c
index 4e53fee5d2..62b93b4ecb 100644
--- a/board/AndesTech/ae350/ae350.c
+++ b/board/AndesTech/ae350/ae350.c
@@ -21,8 +21,6 @@
 #include <fdtdec.h>
 #include <dm.h>
 #include <spl.h>
-#include <mapmem.h>
-#include <hang.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -51,29 +49,6 @@ int misc_init_r(void)
 }
 #endif
 
-#if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL)
-#define ANDES_SPL_FDT_ADDR	(CONFIG_TEXT_BASE - 0x100000)
-void spl_perform_fixups(struct spl_image_info *spl_image)
-{
-	/*
-	 * Originally, u-boot-spl will place DTB directly after the kernel,
-	 * but the size of the kernel did not include the BSS section, which
-	 * means u-boot-spl will place the DTB in the kernel BSS section
-	 * causing the DTB to be cleared by kernel BSS initializtion.
-	 * Moving DTB in front of the kernel can avoid the error.
-	 */
-	if (ANDES_SPL_FDT_ADDR < 0) {
-		printf("%s: CONFIG_TEXT_BASE needs to be larger than 0x100000\n",
-		       __func__);
-		hang();
-	}
-
-	memcpy((void *)ANDES_SPL_FDT_ADDR, spl_image->fdt_addr,
-	       fdt_totalsize(spl_image->fdt_addr));
-	spl_image->fdt_addr = map_sysmem(ANDES_SPL_FDT_ADDR, 0);
-}
-#endif
-
 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 6a4772eea9..8805dd33fe 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1113,7 +1113,7 @@ config SPL_OS_BOOT
 
 config SPL_PAYLOAD_ARGS_ADDR
 	hex "Address in memory to load 'args' file for Falcon Mode to"
-	depends on SPL_OS_BOOT
+	depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
 	default 0x88000000 if ARCH_OMAP2PLUS
 	help
 	  Address in memory where the 'args' file, typically a device tree
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
index 9801d38c0b..8127ebc946 100644
--- a/common/spl/spl_opensbi.c
+++ b/common/spl/spl_opensbi.c
@@ -16,6 +16,7 @@
 #include <opensbi.h>
 #include <linux/libfdt.h>
 #include <linux/printk.h>
+#include <mapmem.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -57,6 +58,20 @@ void __noreturn spl_invoke_opensbi(struct spl_image_info *spl_image)
 		hang();
 	}
 
+	/*
+	 * Originally, u-boot-spl will place DTB directly after the kernel,
+	 * but the size of the kernel did not include the BSS section, which
+	 * means u-boot-spl will place the DTB in the kernel BSS section
+	 * causing the DTB to be cleared by kernel BSS initializtion.
+	 * Moving DTB in front of the kernel can avoid the error.
+	 */
+#if CONFIG_IS_ENABLED(LOAD_FIT_OPENSBI_OS_BOOT) && \
+    CONFIG_IS_ENABLED(PAYLOAD_ARGS_ADDR)
+	memcpy((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, spl_image->fdt_addr,
+	       fdt_totalsize(spl_image->fdt_addr));
+	spl_image->fdt_addr = map_sysmem(CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0);
+#endif
+
 	/*
 	 * Find next os image in /fit-images
 	 * The next os image default is u-boot proper, once enable