From: Prabhakar Kushwaha Date: Tue, 16 Apr 2013 07:58:12 +0000 (+0530) Subject: board/p1010rdb:Add NAND boot support using new SPL format X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=0fa934d235c282e8efd119fc14a18315a8666930;p=u-boot.git board/p1010rdb:Add NAND boot support using new SPL format - defines constants - Add spl_minimal.c to initialise DDR - update TLB entries as per NAND boot - remove nand_spl support for P1010RDB Signed-off-by: Prabhakar Kushwaha Signed-off-by: Andy Fleming --- diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile index 4c705b627e..e6563be098 100644 --- a/board/freescale/p1010rdb/Makefile +++ b/board/freescale/p1010rdb/Makefile @@ -24,11 +24,27 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +MINIMAL= + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +ifdef MINIMAL + +COBJS-y += spl_minimal.o tlb.o law.o + +else + COBJS-y += $(BOARD).o COBJS-y += ddr.o COBJS-y += law.o COBJS-y += tlb.o +endif + SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/board/freescale/p1010rdb/spl_minimal.c similarity index 95% rename from nand_spl/board/freescale/p1010rdb/nand_boot.c rename to board/freescale/p1010rdb/spl_minimal.c index 3c7bc2bc65..c909e0ee31 100644 --- a/nand_spl/board/freescale/p1010rdb/nand_boot.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -31,11 +31,18 @@ DECLARE_GLOBAL_DATA_PTR; -unsigned long ddr_freq_mhz; void sdram_init(void) { ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 ddr_ratio; + unsigned long ddr_freq_mhz; + + ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; + ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; + ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; + /* mask off E bit */ u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); @@ -81,6 +88,7 @@ void sdram_init(void) __raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds); } + asm volatile("sync;isync"); udelay(500); /* Let the controller go */ @@ -91,7 +99,7 @@ void sdram_init(void) void board_init_f(ulong bootflag) { - u32 plat_ratio, ddr_ratio; + u32 plat_ratio; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; /* initialize selected port with appropriate baud rate */ @@ -99,10 +107,6 @@ void board_init_f(ulong bootflag) plat_ratio >>= 1; gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, gd->bus_clk / 16 / CONFIG_BAUDRATE); @@ -115,8 +119,8 @@ void board_init_f(ulong bootflag) /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); + + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); } void board_init_r(gd_t *gd, ulong dest_addr) diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index 4256bf4e57..7a8690a90d 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -43,16 +43,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), + SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_8K, 1), /* *I*G* - CCSRBAR */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), -#ifndef CONFIG_NAND_SPL +#ifndef CONFIG_SPL_BUILD #ifndef CONFIG_SDCARD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, @@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 3, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_PCI +#ifndef CONFIG_PCI /* *I*G* - PCI */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_1M, 1), #endif -#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_1G, 1) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 0eeee6534b..7b28a27bc0 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -48,15 +48,25 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif -#ifdef CONFIG_NAND /* NAND Boot */ -#define CONFIG_RAMBOOT_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE_SPL 0xff800000 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL -#else -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#endif /* CONFIG_NAND_SPL */ +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" + +#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SPL_TEXT_BASE 0xFFFFE000 +#define CONFIG_SPL_MAX_SIZE 8192 +#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 +#define CONFIG_SPL_RELOC_STACK 0x00100000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif @@ -74,8 +84,10 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif /* High Level Configuration Options */ @@ -242,7 +254,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* Don't relocate CCSRBAR while in NAND_SPL */ -#ifdef CONFIG_NAND_SPL +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif @@ -268,6 +280,10 @@ extern unsigned long get_sdram_size(void); * IFC Definitions */ /* NOR Flash on IFC */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NO_FLASH +#endif + #define CONFIG_SYS_FLASH_BASE 0xee000000 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ @@ -353,7 +369,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SECBOOT) +#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR @@ -385,15 +401,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 #endif -/* NAND boot: 8K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x2000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x10000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffb00000 @@ -421,8 +428,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CS3_FTIM3 0x0 #endif /* CONFIG_SDCARD */ -#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ - defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #else @@ -457,7 +463,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL +#ifdef CONFIG_SPL_BUILD #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -512,7 +518,7 @@ extern unsigned long get_sdram_size(void); * SPI interface will not be available in case of NAND boot SPI CS0 will be * used for SLIC */ -#if !defined(CONFIG_NAND_U_BOOT) || !defined(CONFIG_NAND_SECBOOT) +#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) /* eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH @@ -607,7 +613,6 @@ extern unsigned long get_sdram_size(void); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) #if defined(CONFIG_RAMBOOT_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION @@ -622,16 +627,15 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_NAND_U_BOOT) +#elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_U_BOOT_SIZE +#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#else +#elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile deleted file mode 100644 index f7bdf9207d..0000000000 --- a/nand_spl/board/freescale/p1010rdb/Makefile +++ /dev/null @@ -1,142 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2011 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -NAND_SPL := y -CONFIG_SYS_TEXT_BASE_SPL := 0xff800000 -PAD_TO := 0xff802000 - -include $(TOPDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -AFLAGS += -DCONFIG_NAND_SPL -CFLAGS += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o ticks.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o - -SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c - -$(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c - -$(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c - -$(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c - -$(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c - -$(obj)nand_boot_fsl_ifc.c: - @rm -f $(obj)nand_boot_fsl_ifc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_ifc.c \ - $(obj)nand_boot_fsl_ifc.c - -$(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c - -$(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S - -$(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S - -$(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S - -$(obj)ticks.S: - @rm -f $(obj)ticks.S - ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S - -$(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c - -$(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c - -ifneq ($(OBJTREE), $(SRCTREE)) -$(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c -endif - -######################################################################### - -$(obj)%.o: $(obj)%.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)%.o: $(obj)%.c - $(CC) $(CFLAGS) -c -o $@ $< - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/nand_spl/nand_boot_fsl_ifc.c b/nand_spl/nand_boot_fsl_ifc.c deleted file mode 100644 index 44972c5c09..0000000000 --- a/nand_spl/nand_boot_fsl_ifc.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine - * - * Copyright 2011 Freescale Semiconductor, Inc. - * Author: Dipen Dudhat - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -static inline int is_blank(uchar *addr, int page_size) -{ - int i; - - for (i = 0; i < page_size; i++) { - if (__raw_readb(&addr[i]) != 0xff) - return 0; - } - - /* - * For the SPL, don't worry about uncorrectable errors - * where the main area is all FFs but shouldn't be. - */ - return 1; -} - -/* returns nonzero if entire page is blank */ -static inline int check_read_ecc(uchar *buf, u32 *eccstat, - unsigned int bufnum, int page_size) -{ - u32 reg = eccstat[bufnum / 4]; - int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15; - - if (errors == 15) { /* uncorrectable */ - /* Blank pages fail hw ECC checks */ - if (is_blank(buf, page_size)) - return 1; - - puts("ecc error\n"); - for (;;) - ; - } - - return 0; -} - -static inline void nand_wait(uchar *buf, int bufnum, int page_size) -{ - struct fsl_ifc *ifc = IFC_BASE_ADDR; - u32 status; - u32 eccstat[4]; - int bufperpage = page_size / 512; - int bufnum_end, i; - - bufnum *= bufperpage; - bufnum_end = bufnum + bufperpage - 1; - - do { - status = in_be32(&ifc->ifc_nand.nand_evter_stat); - } while (!(status & IFC_NAND_EVTER_STAT_OPC)); - - if (status & IFC_NAND_EVTER_STAT_FTOER) { - puts("flash time out error\n"); - for (;;) - ; - } - - for (i = bufnum / 4; i <= bufnum_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); - - for (i = bufnum; i <= bufnum_end; i++) { - if (check_read_ecc(buf, eccstat, i, page_size)) - break; - } - - out_be32(&ifc->ifc_nand.nand_evter_stat, status); -} - -static inline int bad_block(uchar *marker, int port_size) -{ - if (port_size == 8) - return __raw_readb(marker) != 0xff; - else - return __raw_readw((u16 *)marker) != 0xffff; -} - -static void nand_load(unsigned int offs, int uboot_size, uchar *dst) -{ - struct fsl_ifc *ifc = IFC_BASE_ADDR; - uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; - int page_size; - int port_size; - int pages_per_blk; - int blk_size; - int bad_marker = 0; - int bufnum_mask, bufnum; - - int csor, cspr; - int pos = 0; - int j = 0; - - int sram_addr; - int pg_no; - - /* Get NAND Flash configuration */ - csor = CONFIG_SYS_NAND_CSOR; - cspr = CONFIG_SYS_NAND_CSPR; - - if (!(csor & CSOR_NAND_ECC_DEC_EN)) { - /* soft ECC in SPL is unimplemented */ - puts("WARNING: soft ECC not checked in SPL\n"); - } else { - u32 hwcsor; - - /* make sure board is configured with ECC on boot */ - hwcsor = in_be32(&ifc->csor_cs[0].csor); - if (!(hwcsor & CSOR_NAND_ECC_DEC_EN)) - puts("WARNING: ECC not checked in SPL, " - "check board cfg\n"); - } - - port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8; - - if (csor & CSOR_NAND_PGS_4K) { - page_size = 4096; - bufnum_mask = 1; - } else if (csor & CSOR_NAND_PGS_2K) { - page_size = 2048; - bufnum_mask = 3; - } else { - page_size = 512; - bufnum_mask = 15; - - if (port_size == 8) - bad_marker = 5; - } - - pages_per_blk = - 32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT); - - blk_size = pages_per_blk * page_size; - - /* Open Full SRAM mapping for spare are access */ - out_be32(&ifc->ifc_nand.ncfgr, 0x0); - - /* Clear Boot events */ - out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); - - /* Program FIR/FCR for Large/Small page */ - if (page_size > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); - } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); - } - - /* Program FBCR = 0 for full page read */ - out_be32(&ifc->ifc_nand.nand_fbcr, 0); - - /* Read and copy u-boot on SDRAM from NAND device, In parallel - * check for Bad block if found skip it and read continue to - * next Block - */ - while (pos < uboot_size) { - int i = 0; - do { - pg_no = offs / page_size; - bufnum = pg_no & bufnum_mask; - sram_addr = bufnum * page_size * 2; - - out_be32(&ifc->ifc_nand.row0, pg_no); - out_be32(&ifc->ifc_nand.col0, 0); - /* start read */ - out_be32(&ifc->ifc_nand.nandseq_strt, - IFC_NAND_SEQ_STRT_FIR_STRT); - - /* wait for read to complete */ - nand_wait(&buf[sram_addr], bufnum, page_size); - - /* - * If either of the first two pages are marked bad, - * continue to the next block. - */ - if (i++ < 2 && - bad_block(&buf[sram_addr + page_size + bad_marker], - port_size)) { - puts("skipping\n"); - offs = (offs + blk_size) & ~(blk_size - 1); - pos &= ~(blk_size - 1); - break; - } - - for (j = 0; j < page_size; j++) - dst[pos + j] = __raw_readb(&buf[sram_addr + j]); - - pos += page_size; - offs += page_size; - } while ((offs & (blk_size - 1)) && (pos < uboot_size)); - } -} - -/* - * Main entrypoint for NAND Boot. It's necessary that SDRAM is already - * configured and available since this code loads the main U-boot image - * from NAND into SDRAM and starts from there. - */ -void nand_boot(void) -{ - __attribute__((noreturn)) void (*uboot)(void); - - /* - * Load U-Boot image from NAND into RAM - */ - nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); - -#ifdef CONFIG_NAND_ENV_DST - nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST); - -#ifdef CONFIG_ENV_OFFSET_REDUND - nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); -#endif -#endif - - /* - * Jump to U-Boot image - */ - /* - * Clean d-cache and invalidate i-cache, to - * make sure that no stale data is executed. - */ - flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - uboot(); -}