From: Patrick Delaunay Date: Mon, 27 Apr 2020 13:29:59 +0000 (+0200) Subject: usb: host: dwc2: add clk support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=0bc632c9b189f0350b2ef81d6583704bd10cfdc9;p=u-boot.git usb: host: dwc2: add clk support Add support for clock with driver model. This patch don't added dependency because when CONFIG_CLK is not activated the clk function are stubbed. Reviewed-by: Simon Goldschmidt Signed-off-by: Patrick Delaunay --- diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index a8e64825b5..b1b79d0a18 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -5,14 +5,15 @@ */ #include +#include #include #include #include #include -#include #include #include #include +#include #include #include #include @@ -39,6 +40,7 @@ struct dwc2_priv { struct udevice *vbus_supply; #endif struct phy phy; + struct clk_bulk clks; #else uint8_t *aligned_buffer; uint8_t *status_buffer; @@ -1377,6 +1379,26 @@ static int dwc2_shutdown_phy(struct udevice *dev) return 0; } +static int dwc2_clk_init(struct udevice *dev) +{ + struct dwc2_priv *priv = dev_get_priv(dev); + int ret; + + ret = clk_get_bulk(dev, &priv->clks); + if (ret == -ENOSYS || ret == -ENOENT) + return 0; + if (ret) + return ret; + + ret = clk_enable_bulk(&priv->clks); + if (ret) { + clk_release_bulk(&priv->clks); + return ret; + } + + return 0; +} + static int dwc2_usb_probe(struct udevice *dev) { struct dwc2_priv *priv = dev_get_priv(dev); @@ -1385,6 +1407,10 @@ static int dwc2_usb_probe(struct udevice *dev) bus_priv->desc_before_addr = true; + ret = dwc2_clk_init(dev); + if (ret) + return ret; + ret = dwc2_setup_phy(dev); if (ret) return ret; @@ -1410,6 +1436,8 @@ static int dwc2_usb_remove(struct udevice *dev) dwc2_uninit_common(priv->regs); reset_release_bulk(&priv->resets); + clk_disable_bulk(&priv->clks); + clk_release_bulk(&priv->clks); return 0; }