From: Otavio Salvador Date: Fri, 29 Jun 2018 18:19:20 +0000 (-0300) Subject: pico-imx7d: README: Drop old instructions about secure mode X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=0a7b54f58779ddbc3383e75789e6e45bb1b93b7f;p=u-boot.git pico-imx7d: README: Drop old instructions about secure mode Our default config already has the secure mode supported, so the manual step is not required anymore. Signed-off-by: Otavio Salvador --- diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README index 9e88bc2f3d..aa9d72c5d1 100644 --- a/board/technexion/pico-imx7d/README +++ b/board/technexion/pico-imx7d/README @@ -52,20 +52,3 @@ Remove power from the pico board. Put pico board into normal boot mode. Power up the board and the new updated U-Boot should boot from eMMC. - -Building U-Boot to boot with NXP 4.1 kernel: - -The NXP 4.1 kernel boots only in secure boot mode on mx7. - -Follow the next steps to enable secure boot: - -$ make mrproper -$ make pico-imx7d_defconfig -$ make menuconfig - -> ARM architecture - -> [*] Enable support for booting in non-secure mode - -> [*] Boot in secure mode by default - -> Exit -$ make - -Flash u-boot.imx using the imx_usb_loader tool.