From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Fri, 22 Nov 2019 17:26:31 +0000 (+0200)
Subject: board: ti: am43xx: remove net platform code
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=0a7886c84dc88011c127eebcad0c909bfce5dae8;p=u-boot.git

board: ti: am43xx: remove net platform code

The TI AM43xx platform has DM_ETH and OF_CONTROL enabled,
so remove networking platform code.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index d12f1ebfdf..99b83d7ed1 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -9,6 +9,7 @@
 
 #include <common.h>
 #include <eeprom.h>
+#include <dm/uclass.h>
 #include <env.h>
 #include <i2c.h>
 #include <init.h>
@@ -28,8 +29,6 @@
 #include <power/pmic.h>
 #include <power/tps65218.h>
 #include <power/tps62362.h>
-#include <miiphy.h>
-#include <cpsw.h>
 #include <linux/usb/gadget.h>
 #include <dwc3-uboot.h>
 #include <dwc3-omap-uboot.h>
@@ -853,109 +852,6 @@ int board_usb_cleanup(int index, enum usb_init_type init)
 #endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
 #endif /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
 
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-static void cpsw_control(int enabled)
-{
-	/* Additional controls can be added here */
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 16,
-	},
-	{
-		.slave_reg_ofs	= 0x308,
-		.sliver_reg_ofs	= 0xdc0,
-		.phy_addr	= 1,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv;
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	/* try reading mac address from efuse */
-	mac_lo = readl(&cdev->macid0l);
-	mac_hi = readl(&cdev->macid0h);
-	mac_addr[0] = mac_hi & 0xFF;
-	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-	mac_addr[4] = mac_lo & 0xFF;
-	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-	if (!env_get("ethaddr")) {
-		puts("<ethaddr> not set. Validating first E-fuse MAC\n");
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-	}
-
-	mac_lo = readl(&cdev->macid1l);
-	mac_hi = readl(&cdev->macid1h);
-	mac_addr[0] = mac_hi & 0xFF;
-	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-	mac_addr[4] = mac_lo & 0xFF;
-	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-	if (!env_get("eth1addr")) {
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("eth1addr", mac_addr);
-	}
-
-	if (board_is_eposevm()) {
-		writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
-		cpsw_slaves[0].phy_addr = 16;
-	} else if (board_is_sk()) {
-		writel(RGMII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-		cpsw_slaves[0].phy_addr = 4;
-		cpsw_slaves[1].phy_addr = 5;
-	} else if (board_is_idk()) {
-		writel(RGMII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-		cpsw_slaves[0].phy_addr = 0;
-	} else {
-		writel(RGMII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
-		cpsw_slaves[0].phy_addr = 0;
-	}
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-
-	return rv;
-}
-#endif
-
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, bd_t *bd)
 {