From: Michal Simek <michal.simek@amd.com>
Date: Thu, 1 Feb 2024 12:38:43 +0000 (+0100)
Subject: arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=04dca75ae3dbb4ec009cd9ff3e5602698f85544d;p=u-boot.git

arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1

usb0 is already updated but forget to also update usb1.

Fixes: 4ff083f09bc2 ("arm64: zynqmp: Do not expose usbhub nodes")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/862ca748670f18f25d88aa5b43c37e3dd6aa35eb.1706791116.git.michal.simek@amd.com
---

diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index afcf8a8ee6..ce7c5eb6d3 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -174,12 +174,13 @@
 	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
-
+#if 0
 	usbhub1: usb-hub { /* u84 */
 		i2c-bus = <&usbhub_i2c1>;
 		compatible = "microchip,usb5744";
 		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
 	};
+#endif
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index 24be5dd84e..6c29f65741 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -175,11 +175,13 @@
 	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
 	assigned-clock-rates = <250000000>, <20000000>;
 
+#if 0
 	usbhub1: usb-hub { /* u84 */
 		i2c-bus = <&usbhub_i2c1>;
 		compatible = "microchip,usb5744";
 		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
 	};
+#endif
 };
 
 &dwc3_1 {