From: Neil Armstrong <narmstrong@baylibre.com>
Date: Fri, 2 Oct 2020 09:16:09 +0000 (+0200)
Subject: video: dw-mipi-dsi: permit configuring the escape clock rate
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=01c9857fa806e23a30f2b042b32ceeac6bee9d36;p=u-boot.git

video: dw-mipi-dsi: permit configuring the escape clock rate

The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.

This is based on the Linux commit [1] and adapted to the U-Boot driver.

[1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---

diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c
index 44a60ac532..4055ef49b6 100644
--- a/drivers/video/dw_mipi_dsi.c
+++ b/drivers/video/dw_mipi_dsi.c
@@ -485,15 +485,27 @@ static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
 
 static void dw_mipi_dsi_init_pll(struct dw_mipi_dsi *dsi)
 {
+	const struct mipi_dsi_phy_ops *phy_ops = dsi->phy_ops;
+	unsigned int esc_rate;
+	u32 esc_clk_division;
+
 	/*
 	 * The maximum permitted escape clock is 20MHz and it is derived from
-	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
+	 * lanebyteclk, which is running at "lane_mbps / 8".
+	 */
+	if (phy_ops->get_esc_clk_rate)
+		phy_ops->get_esc_clk_rate(dsi->device, &esc_rate);
+	else
+		esc_rate = 20; /* Default to 20MHz */
+
+	/*
+	 * We want:
 	 *
-	 *     (lane_mbps >> 3) / esc_clk_division < 20
+	 *     (lane_mbps >> 3) / esc_clk_division < X
 	 * which is:
-	 *     (lane_mbps >> 3) / 20 > esc_clk_division
+	 *     (lane_mbps >> 3) / X > esc_clk_division
 	 */
-	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+	esc_clk_division = (dsi->lane_mbps >> 3) / esc_rate + 1;
 
 	dsi_write(dsi, DSI_PWR_UP, RESET);
 
diff --git a/include/mipi_dsi.h b/include/mipi_dsi.h
index 55c7ab3328..4ca05f71e2 100644
--- a/include/mipi_dsi.h
+++ b/include/mipi_dsi.h
@@ -123,6 +123,7 @@ struct mipi_dsi_phy_ops {
 	void (*post_set_mode)(void *priv_data,  unsigned long mode_flags);
 	int (*get_timing)(void *priv_data, unsigned int lane_mbps,
 			  struct mipi_dsi_phy_timing *timing);
+	void (*get_esc_clk_rate)(void *priv_data, unsigned int *esc_clk_rate);
 };
 
 /**