tools/env: lookup dev_type directly from flash_read_buf/flash_write_buf

flash_write_buf already looks up size/offset/#sector from struct
envdev_s. It can look up mtd_type as well. Same applies to
flash_read_buf. Makes the interface simpler

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>

diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 86849b76a9331b47aad160155d8042b7a8f60ac8..0f0eaa4d8e00c8ee130bd44050727cc4427c2782 100644 (file)
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -689,7 +689,7 @@ static int flash_bad_block(int fd, uint8_t mtd_type, loff_t blockstart)
  * the DEVOFFSET (dev) block. On NOR the loop is only run once.
  */
 static int flash_read_buf (int dev, int fd, void *buf, size_t count,
-                          off_t offset, uint8_t mtd_type)
+                          off_t offset)
 {
        size_t blocklen;        /* erase / write length - one block on NAND,
                                   0 on NOR */
@@ -706,7 +706,7 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count,
        /* Offset inside a block */
        block_seek = offset - blockstart;
 
-       if (mtd_type == MTD_NANDFLASH) {
+       if (DEVTYPE(dev) == MTD_NANDFLASH) {
                /*
                 * NAND: calculate which blocks we are reading. We have
                 * to read one block at a time to skip bad blocks.
@@ -722,7 +722,7 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count,
 
        /* This only runs once on NOR flash */
        while (processed < count) {
-               rc = flash_bad_block(fd, mtd_type, blockstart);
+               rc = flash_bad_block(fd, DEVTYPE(dev), blockstart);
                if (rc < 0)             /* block test failed */
                        return -1;
 
@@ -770,7 +770,7 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count,
  * erase and write the whole data at once.
  */
 static int flash_write_buf (int dev, int fd, void *buf, size_t count,
-                           off_t offset, uint8_t mtd_type)
+                           off_t offset)
 {
        void *data;
        struct erase_info_user erase;
@@ -793,7 +793,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
        /*
         * For mtd devices only offset and size of the environment do matter
         */
-       if (mtd_type == MTD_ABSENT) {
+       if (DEVTYPE(dev) == MTD_ABSENT) {
                blocklen = count;
                erase_len = blocklen;
                blockstart = offset;
@@ -834,8 +834,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
                        return -1;
                }
 
-               rc = flash_read_buf (dev, fd, data, write_total, erase_offset,
-                                    mtd_type);
+               rc = flash_read_buf(dev, fd, data, write_total, erase_offset);
                if (write_total != rc)
                        return -1;
 
@@ -862,7 +861,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
                data = buf;
        }
 
-       if (mtd_type == MTD_NANDFLASH) {
+       if (DEVTYPE(dev) == MTD_NANDFLASH) {
                /*
                 * NAND: calculate which blocks we are writing. We have
                 * to write one block at a time to skip bad blocks.
@@ -876,7 +875,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
 
        /* This only runs once on NOR flash and SPI-dataflash */
        while (processed < write_total) {
-               rc = flash_bad_block(fd, mtd_type, blockstart);
+               rc = flash_bad_block(fd, DEVTYPE(dev), blockstart);
                if (rc < 0)             /* block test failed */
                        return rc;
 
@@ -890,11 +889,11 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
                        continue;
                }
 
-               if (mtd_type != MTD_ABSENT) {
+               if (DEVTYPE(dev) != MTD_ABSENT) {
                        erase.start = blockstart;
                        ioctl(fd, MEMUNLOCK, &erase);
                        /* These do not need an explicit erase cycle */
-                       if (mtd_type != MTD_DATAFLASH)
+                       if (DEVTYPE(dev) != MTD_DATAFLASH)
                                if (ioctl(fd, MEMERASE, &erase) != 0) {
                                        fprintf(stderr,
                                                "MTD erase error on %s: %s\n",
@@ -921,7 +920,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count,
                        return -1;
                }
 
-               if (mtd_type != MTD_ABSENT)
+               if (DEVTYPE(dev) != MTD_ABSENT)
                        ioctl(fd, MEMLOCK, &erase);
 
                processed  += erasesize;
@@ -1008,8 +1007,7 @@ static int flash_write (int fd_current, int fd_target, int dev_target)
 #endif
 
        rc = flash_write_buf(dev_target, fd_target, environment.image,
-                             CUR_ENVSIZE, DEVOFFSET(dev_target),
-                             DEVTYPE(dev_target));
+                            CUR_ENVSIZE, DEVOFFSET(dev_target));
        if (rc < 0)
                return rc;
 
@@ -1033,7 +1031,7 @@ static int flash_read (int fd)
        int rc;
 
        rc = flash_read_buf(dev_current, fd, environment.image, CUR_ENVSIZE,
-                           DEVOFFSET(dev_current), DEVTYPE(dev_current));
+                           DEVOFFSET(dev_current));
        if (rc != CUR_ENVSIZE)
                return -1;