rockchip: rk3288: Allow setting up clocks in U-Boot proper

If U-Boot is chain-loaded from a previous boot loader we must set up the
clocks the way U-Boot wants them. Add code for this. It will do nothing if
SPL has already done the job.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 18fd0dcd207dad5cba2bf829806f78c24a0c7e8b..a354d992da72337f47121ff61173acfb32f42e9e 100644 (file)
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -309,3 +309,38 @@ U_BOOT_CMD(
        "display information about clocks",
        ""
 );
+
+#define GRF_SOC_CON2 0xff77024c
+
+int board_early_init_f(void)
+{
+       struct udevice *pinctrl;
+       struct udevice *dev;
+       int ret;
+
+       /*
+        * This init is done in SPL, but when chain-loading U-Boot SPL will
+        * have been skipped. Allow the clock driver to check if it needs
+        * setting up.
+        */
+       ret = rockchip_get_clk(&dev);
+       if (ret) {
+               debug("CLK init failed: %d\n", ret);
+               return ret;
+       }
+       ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+       if (ret) {
+               debug("%s: Cannot find pinctrl device\n", __func__);
+               return ret;
+       }
+
+       /* Enable debug UART */
+       ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
+       if (ret) {
+               debug("%s: Failed to set up console UART\n", __func__);
+               return ret;
+       }
+       rk_setreg(GRF_SOC_CON2, 1 << 0);
+
+       return 0;
+}

diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 6fc0dcc023f2c389c886f9b364fdfa648ca00bc5..bb880585e14e9bcbf8553d7767ab424bf22c1c84 100644 (file)
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -10,6 +10,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3288-veyron-jerry"
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 # CONFIG_CMD_IMLS is not set