sunxi: usb: Protect phy-init and phy-power-on against multiple calls

Once we add support for the ohci controller the phy-init and phy-power-on
functions may be called twice (once by the ehci code and once by the ohci
code) protect them against this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index 1f85dec07edc9da5d0aaea1ee0f01d2fca7b81ac..410669e548ea7bbcdbd825d23adbaa2c2394f2f7 100644 (file)
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -45,6 +45,8 @@ static struct sunxi_usb_phy {
        int gpio_vbus;
        int gpio_vbus_det;
        int id;
+       int init_count;
+       int power_on_count;
 } sunxi_usb_phy[] = {
        {
                .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
@@ -170,6 +172,10 @@ void sunxi_usb_phy_init(int index)
        struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
        struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
+       phy->init_count++;
+       if (phy->init_count != 1)
+               return;
+
        setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
 
        sunxi_usb_phy_config(phy);
@@ -183,6 +189,10 @@ void sunxi_usb_phy_exit(int index)
        struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
        struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
+       phy->init_count--;
+       if (phy->init_count != 0)
+               return;
+
        if (phy->id != 0)
                sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
 
@@ -193,6 +203,10 @@ void sunxi_usb_phy_power_on(int index)
 {
        struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
 
+       phy->power_on_count++;
+       if (phy->power_on_count != 1)
+               return;
+
        if (phy->gpio_vbus >= 0)
                gpio_set_value(phy->gpio_vbus, 1);
 }
@@ -201,6 +215,10 @@ void sunxi_usb_phy_power_off(int index)
 {
        struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
 
+       phy->power_on_count--;
+       if (phy->power_on_count != 0)
+               return;
+
        if (phy->gpio_vbus >= 0)
                gpio_set_value(phy->gpio_vbus, 0);
 }