]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
armv8/ls2085ardb: Fix SPD address error on early boards
authorYork Sun <yorksun at freescale.com>
Thu, 28 May 2015 09:24:09 +0000 (14:54 +0530)
committerYork Sun <yorksun@freescale.com>
Mon, 20 Jul 2015 18:44:35 +0000 (11:44 -0700)
Board rev C and earlier has duplicated SPD address on 2nd DDR
controller slots. It is fixed on rev D and later. SPD addresses
need to be updated accordingly.

Signed-off-by: York Sun <yorksun at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
board/freescale/ls2085ardb/ls2085ardb.c
include/configs/ls2085ardb.h

index 5f2532802119973db7b78082465be8c6b36e533f..abe2114e1739573b2db928f28e25428f2ccd27f1 100644 (file)
@@ -273,3 +273,22 @@ void qixis_dump_switch(void)
                printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
        }
 }
+
+/*
+ * Board rev C and earlier has duplicated I2C addresses for 2nd controller.
+ * Both slots has 0x54, resulting 2nd slot unusable.
+ */
+void update_spd_address(unsigned int ctrl_num,
+                       unsigned int slot,
+                       unsigned int *addr)
+{
+       u8 sw;
+
+       sw = QIXIS_READ(arch);
+       if ((sw & 0xf) < 0x3) {
+               if (ctrl_num == 1 && slot == 0)
+                       *addr = SPD_EEPROM_ADDRESS4;
+               else if (ctrl_num == 1 && slot == 1)
+                       *addr = SPD_EEPROM_ADDRESS3;
+       }
+}
index ccb85d0179dcafd485dfa546ca60f79025783697..ec103935a280b8ac43477bccecb1a67a136a745b 100644 (file)
@@ -28,8 +28,8 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1    0x51
 #define SPD_EEPROM_ADDRESS2    0x52
-#define SPD_EEPROM_ADDRESS3    0x54
-#define SPD_EEPROM_ADDRESS4    0x53    /* Board error */
+#define SPD_EEPROM_ADDRESS3    0x53
+#define SPD_EEPROM_ADDRESS4    0x54
 #define SPD_EEPROM_ADDRESS5    0x55
 #define SPD_EEPROM_ADDRESS6    0x56    /* dummy address */
 #define SPD_EEPROM_ADDRESS     SPD_EEPROM_ADDRESS1