board: stm32mp1: fixup the usb product id for USB download gadget

Select the correct USB product id used by the download gadget
for ST stm32mp1 boards.

The board stm32mp1 select the correct product id, as defined in
http://www.linux-usb.org/usb.ids for the STMicroelectronics
vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM):
- dfu = 0xdf11 : STM Device in DFU mode
  it is the value used by ROM code and reused for stm32prog
  command
- fasboot = 0x0afb : Android Fastboot device
- others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM)
  Mass Storage Device
  it is used for UMS command / usb_dnl_ums

This patch avoid conflict when the same USB VID/PID is used for
ums, fastboot or dfu command (two different protocols associated
to the same PID).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 18f9b848765576fcad82661b461e938df53af35a..126af301732701803290aa539870d11c6749e896 100644 (file)
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -233,6 +233,23 @@ int g_dnl_board_usb_cable_connected(void)
 
        return dwc2_udc_B_session_valid(dwc2_udc_otg);
 }
+
+#define STM32MP1_G_DNL_DFU_PRODUCT_NUM 0xdf11
+#define STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM 0x0afb
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+       if (!strcmp(name, "usb_dnl_dfu"))
+               put_unaligned(STM32MP1_G_DNL_DFU_PRODUCT_NUM, &dev->idProduct);
+       else if (!strcmp(name, "usb_dnl_fastboot"))
+               put_unaligned(STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM,
+                             &dev->idProduct);
+       else
+               put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct);
+
+       return 0;
+}
+
 #endif /* CONFIG_USB_GADGET */
 
 #ifdef CONFIG_LED