F: include/bootmeth.h
F: include/bootstd.h
F: net/eth_bootdevice.c
+F: test/boot/
BTRFS
M: Marek Behun <marek.behun@nic.cz>
};
};
+ bootstd {
+ compatible = "u-boot,boot-std";
+
+ filename-prefixes = "/", "/boot/";
+ bootdev-order = "mmc2", "mmc1";
+
+ syslinux {
+ compatible = "u-boot,distro-syslinux";
+ };
+
+ efi {
+ compatible = "u-boot,distro-efi";
+ };
+ };
+
reboot-mode0 {
compatible = "reboot-mode-gpio";
gpios = <&gpio_c 0 GPIO_ACTIVE_HIGH>, <&gpio_c 1 GPIO_ACTIVE_HIGH>;
non-removable;
};
+ /* This is used for the bootdev tests */
mmc1 {
compatible = "sandbox,mmc";
+ filename = "mmc1.img";
};
+ /* This is used for the fastboot tests */
mmc0 {
compatible = "sandbox,mmc";
};
CONFIG_IMAGE_PRE_LOAD=y
CONFIG_IMAGE_PRE_LOAD_SIG=y
CONFIG_CONSOLE_RECORD=y
-CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
+CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ENV_EXT4_INTERFACE="host"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:0"
CONFIG_ENV_IMPORT_FDT=y
+# CONFIG_BOOTDEV_ETH is not set
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NETCONSOLE=y
CONFIG_IP_DEFRAG=y
CONFIG_BOOTSTAGE_STASH=y
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
-CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
+CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_INTERFACE="host"
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:0"
+# CONFIG_BOOTDEV_ETH is not set
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NETCONSOLE=y
CONFIG_IP_DEFRAG=y
int do_ut_addrmap(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[]);
int do_ut_bootm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
+int do_ut_bootstd(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[]);
int do_ut_bloblist(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[]);
int do_ut_common(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
obj-y += ut.o
ifeq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_UNIT_TEST) += boot/
obj-$(CONFIG_UNIT_TEST) += common/
obj-$(CONFIG_UNIT_TEST) += lib/
obj-y += log/
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2021 Google LLC
+
+obj-$(CONFIG_BOOTSTD) += bootdev.o bootstd_common.o bootflow.o bootmeth.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test for bootdev functions. All start with 'bootdev'
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <bootstd.h>
+#include <dm.h>
+#include <bootdev.h>
+#include <bootflow.h>
+#include <mapmem.h>
+#include <os.h>
+#include <test/suites.h>
+#include <test/ut.h>
+#include "bootstd_common.h"
+
+/* Allow reseting the USB-started flag */
+extern char usb_started;
+
+/* Check 'bootdev list' command */
+static int bootdev_test_cmd_list(struct unit_test_state *uts)
+{
+ int probed;
+
+ console_record_reset_enable();
+ for (probed = 0; probed < 2; probed++) {
+ int probe_ch = probed ? '+' : ' ';
+
+ ut_assertok(run_command(probed ? "bootdev list -p" :
+ "bootdev list", 0));
+ ut_assert_nextline("Seq Probed Status Uclass Name");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("%3x [ %c ] %6s %-8s %s", 0, probe_ch, "OK",
+ "mmc", "mmc2.bootdev");
+ ut_assert_nextline("%3x [ %c ] %6s %-8s %s", 1, probe_ch, "OK",
+ "mmc", "mmc1.bootdev");
+ ut_assert_nextline("%3x [ %c ] %6s %-8s %s", 2, probe_ch, "OK",
+ "mmc", "mmc0.bootdev");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(3 bootdevs)");
+ ut_assert_console_end();
+ }
+
+ return 0;
+}
+BOOTSTD_TEST(bootdev_test_cmd_list, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootdev select' and 'info' commands */
+static int bootdev_test_cmd_select(struct unit_test_state *uts)
+{
+ struct bootstd_priv *std;
+
+ /* get access to the CLI's cur_bootdev */
+ ut_assertok(bootstd_get_priv(&std));
+
+ console_record_reset_enable();
+ ut_asserteq(1, run_command("bootdev info", 0));
+ ut_assert_nextlinen("Please use");
+ ut_assert_console_end();
+
+ /* select by sequence */
+ ut_assertok(run_command("bootdev select 0", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootdev info", 0));
+ ut_assert_nextline("Name: mmc2.bootdev");
+ ut_assert_nextline("Sequence: 0");
+ ut_assert_nextline("Status: Probed");
+ ut_assert_nextline("Uclass: mmc");
+ ut_assert_nextline("Bootflows: 0 (0 valid)");
+ ut_assert_console_end();
+
+ /* select by bootdev name */
+ ut_assertok(run_command("bootdev select mmc1.bootdev", 0));
+ ut_assert_console_end();
+ ut_assertnonnull(std->cur_bootdev);
+ ut_asserteq_str("mmc1.bootdev", std->cur_bootdev->name);
+
+ /* select by bootdev label*/
+ ut_assertok(run_command("bootdev select mmc1", 0));
+ ut_assert_console_end();
+ ut_assertnonnull(std->cur_bootdev);
+ ut_asserteq_str("mmc1.bootdev", std->cur_bootdev->name);
+
+ /* deselect */
+ ut_assertok(run_command("bootdev select", 0));
+ ut_assert_console_end();
+ ut_assertnull(std->cur_bootdev);
+
+ ut_asserteq(1, run_command("bootdev info", 0));
+ ut_assert_nextlinen("Please use");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootdev_test_cmd_select, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check bootdev labels */
+static int bootdev_test_labels(struct unit_test_state *uts)
+{
+ struct udevice *dev, *media;
+
+ ut_assertok(bootdev_find_by_label("mmc2", &dev));
+ ut_asserteq(UCLASS_BOOTDEV, device_get_uclass_id(dev));
+ media = dev_get_parent(dev);
+ ut_asserteq(UCLASS_MMC, device_get_uclass_id(media));
+ ut_asserteq_str("mmc2", media->name);
+
+ /* Check invalid uclass */
+ ut_asserteq(-EINVAL, bootdev_find_by_label("fred0", &dev));
+
+ /* Check unknown sequence number */
+ ut_asserteq(-ENOENT, bootdev_find_by_label("mmc6", &dev));
+
+ return 0;
+}
+BOOTSTD_TEST(bootdev_test_labels, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check bootdev ordering with the bootdev-order property */
+static int bootdev_test_order(struct unit_test_state *uts)
+{
+ struct bootflow_iter iter;
+ struct bootflow bflow;
+
+ /*
+ * First try the order set by the bootdev-order property
+ * Like all sandbox unit tests this relies on the devicetree setting up
+ * the required devices:
+ *
+ * mmc0 - nothing connected
+ * mmc1 - connected to mmc1.img file
+ * mmc2 - nothing connected
+ */
+ ut_assertok(env_set("boot_targets", NULL));
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(2, iter.num_devs);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[0]->name);
+ ut_asserteq_str("mmc1.bootdev", iter.dev_order[1]->name);
+ bootflow_iter_uninit(&iter);
+
+ /* Use the environment variable to override it */
+ ut_assertok(env_set("boot_targets", "mmc1 mmc2"));
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(2, iter.num_devs);
+ ut_asserteq_str("mmc1.bootdev", iter.dev_order[0]->name);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[1]->name);
+ bootflow_iter_uninit(&iter);
+
+ /*
+ * Now drop both orderings, to check the default (prioriy/sequence)
+ * ordering
+ */
+ ut_assertok(env_set("boot_targets", NULL));
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(3, iter.num_devs);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[0]->name);
+ ut_asserteq_str("mmc1.bootdev", iter.dev_order[1]->name);
+ ut_asserteq_str("mmc0.bootdev", iter.dev_order[2]->name);
+
+ /*
+ * Check that adding aliases for the bootdevs works. We just fake it by
+ * setting the sequence numbers directly.
+ */
+ iter.dev_order[0]->seq_ = 0;
+ iter.dev_order[1]->seq_ = 3;
+ iter.dev_order[2]->seq_ = 2;
+ bootflow_iter_uninit(&iter);
+
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(3, iter.num_devs);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[0]->name);
+ ut_asserteq_str("mmc0.bootdev", iter.dev_order[1]->name);
+ ut_asserteq_str("mmc1.bootdev", iter.dev_order[2]->name);
+ bootflow_iter_uninit(&iter);
+
+ return 0;
+}
+BOOTSTD_TEST(bootdev_test_order, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check bootdev ordering with the uclass priority */
+static int bootdev_test_prio(struct unit_test_state *uts)
+{
+ struct bootdev_uc_plat *ucp;
+ struct bootflow_iter iter;
+ struct bootflow bflow;
+ struct udevice *blk;
+
+ /* Start up USB which gives us three additional bootdevs */
+ usb_started = false;
+ ut_assertok(run_command("usb start", 0));
+
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ /* 3 MMC and 3 USB bootdevs: MMC should come before USB */
+ console_record_reset_enable();
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(6, iter.num_devs);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[0]->name);
+ ut_asserteq_str("usb_mass_storage.lun0.bootdev",
+ iter.dev_order[3]->name);
+
+ ut_assertok(bootdev_get_sibling_blk(iter.dev_order[3], &blk));
+ ut_asserteq_str("usb_mass_storage.lun0", blk->name);
+
+ /* adjust the priority of the first USB bootdev to the highest */
+ ucp = dev_get_uclass_plat(iter.dev_order[3]);
+ ucp->prio = 1;
+
+ bootflow_iter_uninit(&iter);
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(6, iter.num_devs);
+ ut_asserteq_str("usb_mass_storage.lun0.bootdev",
+ iter.dev_order[0]->name);
+ ut_asserteq_str("mmc2.bootdev", iter.dev_order[1]->name);
+
+ return 0;
+}
+BOOTSTD_TEST(bootdev_test_prio, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test for bootdev functions. All start with 'bootdev'
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <bootdev.h>
+#include <bootflow.h>
+#include <bootstd.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <test/suites.h>
+#include <test/ut.h>
+#include "bootstd_common.h"
+
+/* Check 'bootflow scan/list' commands */
+static int bootflow_cmd(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootdev select 1", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow scan -l", 0));
+ ut_assert_nextline("Scanning for bootflows in bootdev 'mmc1.bootdev'");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(1 bootflow, 1 valid)");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow list", 0));
+ ut_assert_nextline("Showing bootflows for bootdev 'mmc1.bootdev'");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(1 bootflow, 1 valid)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow scan' with a name / label / seq */
+static int bootflow_cmd_label(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan -l mmc1", 0));
+ ut_assert_nextline("Scanning for bootflows in bootdev 'mmc1.bootdev'");
+ ut_assert_skip_to_line("(1 bootflow, 1 valid)");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow scan -l mmc0.bootdev", 0));
+ ut_assert_nextline("Scanning for bootflows in bootdev 'mmc0.bootdev'");
+ ut_assert_skip_to_line("(0 bootflows, 0 valid)");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow scan -l 0", 0));
+ ut_assert_nextline("Scanning for bootflows in bootdev 'mmc2.bootdev'");
+ ut_assert_skip_to_line("(0 bootflows, 0 valid)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd_label, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow scan/list' commands using all bootdevs */
+static int bootflow_cmd_glob(struct unit_test_state *uts)
+{
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan -l", 0));
+ ut_assert_nextline("Scanning for bootflows in all bootdevs");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':");
+ ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':");
+ ut_assert_nextline(" 0 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_nextline("Scanning bootdev 'mmc0.bootdev':");
+ ut_assert_nextline("No more bootdevs");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(1 bootflow, 1 valid)");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow list", 0));
+ ut_assert_nextline("Showing all bootflows");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(1 bootflow, 1 valid)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd_glob, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow scan -e' */
+static int bootflow_cmd_scan_e(struct unit_test_state *uts)
+{
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan -ale", 0));
+ ut_assert_nextline("Scanning for bootflows in all bootdevs");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':");
+ ut_assert_nextline(" 0 syslinux media mmc 0 mmc2.bootdev.whole <NULL>");
+ ut_assert_nextline(" ** No partition found, err=-93");
+ ut_assert_nextline(" 1 efi media mmc 0 mmc2.bootdev.whole <NULL>");
+ ut_assert_nextline(" ** No partition found, err=-93");
+
+ ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':");
+ ut_assert_nextline(" 2 syslinux media mmc 0 mmc1.bootdev.whole <NULL>");
+ ut_assert_nextline(" ** No partition found, err=-2");
+ ut_assert_nextline(" 3 efi media mmc 0 mmc1.bootdev.whole <NULL>");
+ ut_assert_nextline(" ** No partition found, err=-2");
+ ut_assert_nextline(" 4 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_nextline(" 5 efi fs mmc 1 mmc1.bootdev.part_1 efi/boot/bootsbox.efi");
+
+ ut_assert_skip_to_line("Scanning bootdev 'mmc0.bootdev':");
+ ut_assert_skip_to_line(" 3f efi media mmc 0 mmc0.bootdev.whole <NULL>");
+ ut_assert_nextline(" ** No partition found, err=-93");
+ ut_assert_nextline("No more bootdevs");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(64 bootflows, 1 valid)");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow list", 0));
+ ut_assert_nextline("Showing all bootflows");
+ ut_assert_nextline("Seq Method State Uclass Part Name Filename");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 syslinux media mmc 0 mmc2.bootdev.whole <NULL>");
+ ut_assert_nextline(" 1 efi media mmc 0 mmc2.bootdev.whole <NULL>");
+ ut_assert_skip_to_line(" 4 syslinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf");
+ ut_assert_skip_to_line(" 3f efi media mmc 0 mmc0.bootdev.whole <NULL>");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(64 bootflows, 1 valid)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd_scan_e, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow info' */
+static int bootflow_cmd_info(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootdev select 1", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow scan", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow select 0", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow info", 0));
+ ut_assert_nextline("Name: mmc1.bootdev.part_1");
+ ut_assert_nextline("Device: mmc1.bootdev");
+ ut_assert_nextline("Block dev: mmc1.blk");
+ ut_assert_nextline("Method: syslinux");
+ ut_assert_nextline("State: ready");
+ ut_assert_nextline("Partition: 1");
+ ut_assert_nextline("Subdir: (none)");
+ ut_assert_nextline("Filename: /extlinux/extlinux.conf");
+ ut_assert_nextlinen("Buffer: ");
+ ut_assert_nextline("Size: 253 (595 bytes)");
+ ut_assert_nextline("Error: 0");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("bootflow info -d", 0));
+ ut_assert_nextline("Name: mmc1.bootdev.part_1");
+ ut_assert_skip_to_line("Error: 0");
+ ut_assert_nextline("Contents:");
+ ut_assert_nextline("%s", "");
+ ut_assert_nextline("# extlinux.conf generated by appliance-creator");
+ ut_assert_skip_to_line(" initrd /initramfs-5.3.7-301.fc31.armv7hl.img");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd_info, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow scan -b' to boot the first available bootdev */
+static int bootflow_scan_boot(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan -b", 0));
+ ut_assert_nextline(
+ "** Booting bootflow 'mmc1.bootdev.part_1' with syslinux");
+ ut_assert_nextline("Ignoring unknown command: ui");
+
+ /*
+ * We expect it to get through to boot although sandbox always returns
+ * -EFAULT as it cannot actually boot the kernel
+ */
+ ut_assert_skip_to_line("sandbox: continuing, as we cannot run Linux");
+ ut_assert_nextline("Boot failed (err=-14)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_scan_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check iterating through available bootflows */
+static int bootflow_iter(struct unit_test_state *uts)
+{
+ struct bootflow_iter iter;
+ struct bootflow bflow;
+
+ bootstd_clear_glob();
+
+ /* The first device is mmc2.bootdev which has no media */
+ ut_asserteq(-EPROTONOSUPPORT,
+ bootflow_scan_first(&iter, BOOTFLOWF_ALL, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(0, iter.cur_method);
+ ut_asserteq(0, iter.part);
+ ut_asserteq(0, iter.max_part);
+ ut_asserteq_str("syslinux", iter.method->name);
+ ut_asserteq(0, bflow.err);
+
+ /*
+ * This shows MEDIA even though there is none, since int
+ * bootdev_find_in_blk() we call part_get_info() which returns
+ * -EPROTONOSUPPORT. Ideally it would return -EEOPNOTSUPP and we would
+ * know.
+ */
+ ut_asserteq(BOOTFLOWST_MEDIA, bflow.state);
+
+ ut_asserteq(-EPROTONOSUPPORT, bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(1, iter.cur_method);
+ ut_asserteq(0, iter.part);
+ ut_asserteq(0, iter.max_part);
+ ut_asserteq_str("efi", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_MEDIA, bflow.state);
+ bootflow_free(&bflow);
+
+ /* The next device is mmc1.bootdev - at first we use the whole device */
+ ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(0, iter.cur_method);
+ ut_asserteq(0, iter.part);
+ ut_asserteq(0x1e, iter.max_part);
+ ut_asserteq_str("syslinux", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_MEDIA, bflow.state);
+ bootflow_free(&bflow);
+
+ ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(1, iter.cur_method);
+ ut_asserteq(0, iter.part);
+ ut_asserteq(0x1e, iter.max_part);
+ ut_asserteq_str("efi", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_MEDIA, bflow.state);
+ bootflow_free(&bflow);
+
+ /* Then more to partition 1 where we find something */
+ ut_assertok(bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(0, iter.cur_method);
+ ut_asserteq(1, iter.part);
+ ut_asserteq(0x1e, iter.max_part);
+ ut_asserteq_str("syslinux", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_READY, bflow.state);
+ bootflow_free(&bflow);
+
+ ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(1, iter.cur_method);
+ ut_asserteq(1, iter.part);
+ ut_asserteq(0x1e, iter.max_part);
+ ut_asserteq_str("efi", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_FS, bflow.state);
+ bootflow_free(&bflow);
+
+ /* Then more to partition 2 which doesn't exist */
+ ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow));
+ ut_asserteq(2, iter.num_methods);
+ ut_asserteq(0, iter.cur_method);
+ ut_asserteq(2, iter.part);
+ ut_asserteq(0x1e, iter.max_part);
+ ut_asserteq_str("syslinux", iter.method->name);
+ ut_asserteq(0, bflow.err);
+ ut_asserteq(BOOTFLOWST_MEDIA, bflow.state);
+ bootflow_free(&bflow);
+
+ bootflow_iter_uninit(&iter);
+
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_iter, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check using the system bootdev */
+static int bootflow_system(struct unit_test_state *uts)
+{
+ struct udevice *bootstd, *dev;
+
+ /* Add the EFI bootmgr driver */
+ ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
+ ut_assertok(device_bind_driver(bootstd, "bootmeth_efi_mgr", "bootmgr",
+ &dev));
+
+ /* Add the system bootdev that it uses */
+ ut_assertok(device_bind_driver(bootstd, "system_bootdev",
+ "system-bootdev", &dev));
+
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ /* We should get a single 'bootmgr' method right at the end */
+ bootstd_clear_glob();
+ console_record_reset_enable();
+ ut_assertok(run_command("bootflow scan -l", 0));
+ ut_assert_skip_to_line(" 1 bootmgr ready bootstd 0 <NULL> <NULL>");
+ ut_assert_nextline("No more bootdevs");
+ ut_assert_skip_to_line("(2 bootflows, 2 valid)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_system, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check disabling a bootmethod if it requests it */
+static int bootflow_iter_disable(struct unit_test_state *uts)
+{
+ struct udevice *bootstd, *dev;
+ struct bootflow_iter iter;
+ struct bootflow bflow;
+ int i;
+
+ /* Add the EFI bootmgr driver */
+ ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
+ ut_assertok(device_bind_driver(bootstd, "bootmeth_sandbox", "sandbox",
+ &dev));
+
+ /* Add the system bootdev that it uses */
+ ut_assertok(device_bind_driver(bootstd, "system_bootdev",
+ "system-bootdev", &dev));
+
+ ut_assertok(bootstd_test_drop_bootdev_order(uts));
+
+ bootstd_clear_glob();
+ ut_assertok(run_command("bootflow scan -lb", 0));
+
+ /* Try to boot the bootmgr flow, which will fail */
+ console_record_reset_enable();
+ ut_assertok(bootflow_scan_first(&iter, 0, &bflow));
+ ut_asserteq(3, iter.num_methods);
+ ut_asserteq_str("sandbox", iter.method->name);
+ ut_asserteq(-ENOTSUPP, bootflow_run_boot(&iter, &bflow));
+
+ ut_assert_skip_to_line("Boot method 'sandbox' failed and will not be retried");
+ ut_assert_console_end();
+
+ /* Check that the sandbox bootmeth has been removed */
+ ut_asserteq(2, iter.num_methods);
+ for (i = 0; i < iter.num_methods; i++)
+ ut_assert(strcmp("sandbox", iter.method_order[i]->name));
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_iter_disable, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootflow boot' to boot a selected bootflow */
+static int bootflow_cmd_boot(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootdev select 1", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow scan", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootflow select 0", 0));
+ ut_assert_console_end();
+ ut_asserteq(1, run_command("bootflow boot", 0));
+ ut_assert_nextline(
+ "** Booting bootflow 'mmc1.bootdev.part_1' with syslinux");
+ ut_assert_nextline("Ignoring unknown command: ui");
+
+ /*
+ * We expect it to get through to boot although sandbox always returns
+ * -EFAULT as it cannot actually boot the kernel
+ */
+ ut_assert_skip_to_line("sandbox: continuing, as we cannot run Linux");
+ ut_assert_nextline("Boot failed (err=-14)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootflow_cmd_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test for bootdev functions. All start with 'bootdev'
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <bootstd.h>
+#include <test/suites.h>
+#include <test/ut.h>
+#include "bootstd_common.h"
+
+/* Check 'bootmeth list' command */
+static int bootmeth_cmd_list(struct unit_test_state *uts)
+{
+ console_record_reset_enable();
+ ut_assertok(run_command("bootmeth list", 0));
+ ut_assert_nextline("Order Seq Name Description");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 0 syslinux Syslinux boot from a block device");
+ ut_assert_nextline(" 1 1 efi EFI boot from an .efi file");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(2 bootmeths)");
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootmeth_cmd_list, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootmeth order' command */
+static int bootmeth_cmd_order(struct unit_test_state *uts)
+{
+ /* Select just one bootmethod */
+ console_record_reset_enable();
+ ut_assertok(run_command("bootmeth order syslinux", 0));
+ ut_assert_console_end();
+ ut_assertnonnull(env_get("bootmeths"));
+ ut_asserteq_str("syslinux", env_get("bootmeths"));
+
+ /* Only that one should be listed */
+ ut_assertok(run_command("bootmeth list", 0));
+ ut_assert_nextline("Order Seq Name Description");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 0 syslinux Syslinux boot from a block device");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(1 bootmeth)");
+ ut_assert_console_end();
+
+ /* Check the -a flag, efi should show as not in the order ("-") */
+ ut_assertok(run_command("bootmeth list -a", 0));
+ ut_assert_nextline("Order Seq Name Description");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 0 syslinux Syslinux boot from a block device");
+ ut_assert_nextline(" - 1 efi EFI boot from an .efi file");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(2 bootmeths)");
+ ut_assert_console_end();
+
+ /* Check the -a flag with the reverse order */
+ ut_assertok(run_command("bootmeth order \"efi syslinux\"", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootmeth list -a", 0));
+ ut_assert_nextline("Order Seq Name Description");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 1 0 syslinux Syslinux boot from a block device");
+ ut_assert_nextline(" 0 1 efi EFI boot from an .efi file");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(2 bootmeths)");
+ ut_assert_console_end();
+
+ /* Now reset the order to empty, which should show all of them again */
+ ut_assertok(run_command("bootmeth order", 0));
+ ut_assert_console_end();
+ ut_assertnull(env_get("bootmeths"));
+ ut_assertok(run_command("bootmeth list", 0));
+ ut_assert_skip_to_line("(2 bootmeths)");
+
+ /* Try reverse order */
+ ut_assertok(run_command("bootmeth order \"efi syslinux\"", 0));
+ ut_assert_console_end();
+ ut_assertok(run_command("bootmeth list", 0));
+ ut_assert_nextline("Order Seq Name Description");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline(" 0 1 efi EFI boot from an .efi file");
+ ut_assert_nextline(" 1 0 syslinux Syslinux boot from a block device");
+ ut_assert_nextlinen("---");
+ ut_assert_nextline("(2 bootmeths)");
+ ut_assertnonnull(env_get("bootmeths"));
+ ut_asserteq_str("efi syslinux", env_get("bootmeths"));
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootmeth_cmd_order, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
+
+/* Check 'bootmeths' env var */
+static int bootmeth_env(struct unit_test_state *uts)
+{
+ struct bootstd_priv *std;
+
+ ut_assertok(bootstd_get_priv(&std));
+
+ /* Select just one bootmethod */
+ console_record_reset_enable();
+ ut_assertok(env_set("bootmeths", "syslinux"));
+ ut_asserteq(1, std->bootmeth_count);
+
+ /* Select an invalid bootmethod */
+ ut_asserteq(1, run_command("setenv bootmeths fred", 0));
+ ut_assert_nextline("Unknown bootmeth 'fred'");
+ ut_assert_nextlinen("## Error inserting");
+ ut_assert_console_end();
+
+ ut_assertok(env_set("bootmeths", "efi syslinux"));
+ ut_asserteq(2, std->bootmeth_count);
+ ut_assert_console_end();
+
+ return 0;
+}
+BOOTSTD_TEST(bootmeth_env, UT_TESTF_DM | UT_TESTF_SCAN_FDT);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test for bootdev functions. All start with 'bootdev'
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <bootstd.h>
+#include <dm.h>
+#include <test/suites.h>
+#include <test/ut.h>
+#include "bootstd_common.h"
+
+int bootstd_test_drop_bootdev_order(struct unit_test_state *uts)
+{
+ struct bootstd_priv *priv;
+ struct udevice *bootstd;
+
+ ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd));
+ priv = dev_get_priv(bootstd);
+ priv->bootdev_order = NULL;
+
+ return 0;
+}
+
+int do_ut_bootstd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct unit_test *tests = UNIT_TEST_SUITE_START(bootstd_test);
+ const int n_ents = UNIT_TEST_SUITE_COUNT(bootstd_test);
+
+ return cmd_ut_category("bootstd", "bootstd_test_",
+ tests, n_ents, argc, argv);
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Common header file for bootdev, bootflow, bootmeth tests
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __bootstd_common_h
+#define __bootstd_common_h
+
+/* Declare a new bootdev test */
+#define BOOTSTD_TEST(_name, _flags) \
+ UNIT_TEST(_name, _flags, bootstd_test)
+
+struct unit_test_state;
+
+/**
+ * bootstd_test_drop_bootdev_order() - Remove the existing boot order
+ *
+ * Drop the boot order so that all bootdevs are used in their alias order
+ *
+ * @uts: Unit test state to use for ut_assert...() functions
+ */
+int bootstd_test_drop_bootdev_order(struct unit_test_state *uts);
+
+#endif
static struct cmd_tbl cmd_ut_sub[] = {
U_BOOT_CMD_MKENT(all, CONFIG_SYS_MAXARGS, 1, do_ut_all, "", ""),
+#ifdef CONFIG_BOOTSTD
+ U_BOOT_CMD_MKENT(bootstd, CONFIG_SYS_MAXARGS, 1, do_ut_bootstd,
+ "", ""),
+#endif
U_BOOT_CMD_MKENT(common, CONFIG_SYS_MAXARGS, 1, do_ut_common, "", ""),
#if defined(CONFIG_UT_DM)
U_BOOT_CMD_MKENT(dm, CONFIG_SYS_MAXARGS, 1, do_ut_dm, "", ""),
"ut bloblist - Test bloblist implementation\n"
"ut compression - Test compressors and bootm decompression\n"
#endif
+#ifdef CONFIG_BOOTSTD
+ "ut bootstd - Test standard boot implementation\n"
+#endif
#ifdef CONFIG_UT_DM
"ut dm [test-name]\n"
#endif
projects / u-boot.git / commitdiff
