]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm64: mvebu: Add bubt command for flash image burn
authorKonstantin Porotchkin <kostap@marvell.com>
Thu, 8 Dec 2016 10:22:28 +0000 (12:22 +0200)
committerStefan Roese <sr@denx.de>
Mon, 12 Dec 2016 08:04:52 +0000 (09:04 +0100)
Add support for mvebu bubt command for flash image
load, check and burn on boot device.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
cmd/Kconfig
cmd/Makefile
cmd/mvebu/Kconfig [new file with mode: 0644]
cmd/mvebu/Makefile [new file with mode: 0644]
cmd/mvebu/bubt.c [new file with mode: 0644]
doc/mvebu/cmd/bubt.txt [new file with mode: 0644]

index 586a6456e4f3597e74fef347e3ffbb1841d62abe..bffa7134f7513bf46e8f98623e5637bda0b8c24a 100644 (file)
@@ -653,6 +653,9 @@ config CMD_QFW
          This provides access to the QEMU firmware interface.  The main
          feature is to allow easy loading of files passed to qemu-system
          via -kernel / -initrd
+
+source "cmd/mvebu/Kconfig"
+
 endmenu
 
 config CMD_BOOTSTAGE
index 9c9a9d112b0db745fd798e880a8e6559fbcd5148..34bc5448b9382fcb35fe9781bb30743db79ca463 100644 (file)
@@ -163,3 +163,5 @@ obj-$(CONFIG_CMD_BLOB) += blob.o
 
 # core command
 obj-y += nvedit.o
+
+obj-$(CONFIG_ARCH_MVEBU) += mvebu/
diff --git a/cmd/mvebu/Kconfig b/cmd/mvebu/Kconfig
new file mode 100644 (file)
index 0000000..ad10a57
--- /dev/null
@@ -0,0 +1,52 @@
+menu "MVEBU commands"
+depends on ARCH_MVEBU
+
+config CMD_MVEBU_BUBT
+       bool "bubt"
+       default n
+       help
+         bubt - Burn a u-boot image to flash
+         For details about bubt command please see the documentation
+         in doc/mvebu/cmd/bubt.txt
+
+choice
+       prompt "Flash for image"
+       default MVEBU_SPI_BOOT
+
+config MVEBU_NAND_BOOT
+       bool "NAND flash boot"
+       depends on NAND_PXA3XX
+       help
+         Enable boot from NAND flash.
+         Allow usage of NAND flash as a target for "bubt" command
+         For details about bubt command please see the documentation
+         in doc/mvebu/cmd/bubt.txt
+
+config MVEBU_SPI_BOOT
+       bool "SPI flash boot"
+       depends on SPI_FLASH
+       help
+         Enable boot from SPI flash.
+         Allow usage of SPI flash as a target for "bubt" command
+         For details about bubt command please see the documentation
+         in doc/mvebu/cmd/bubt.txt
+
+config MVEBU_MMC_BOOT
+       bool "eMMC flash boot"
+       depends on MVEBU_MMC
+       help
+         Enable boot from eMMC boot partition
+         Allow usage of eMMC/SD device as a target for "bubt" command
+         For details about bubt command please see the documentation
+         in doc/mvebu/cmd/bubt.txt
+
+endchoice
+
+config MVEBU_UBOOT_DFLT_NAME
+       string "Default image name for bubt command"
+       default "flash-image.bin"
+       help
+         This option should contain a default file name to be used with
+         MVEBU "bubt" command if the source file name is omitted
+
+endmenu
diff --git a/cmd/mvebu/Makefile b/cmd/mvebu/Makefile
new file mode 100644 (file)
index 0000000..03de53e
--- /dev/null
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2016 Marvell International Ltd.
+#
+# SPDX-License-Identifier:     GPL-2.0
+# https://spdx.org/licenses
+
+
+obj-$(CONFIG_CMD_MVEBU_BUBT) += bubt.o
diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
new file mode 100644 (file)
index 0000000..1cbfcf0
--- /dev/null
@@ -0,0 +1,767 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <vsprintf.h>
+#include <errno.h>
+#include <dm.h>
+
+#include <spi_flash.h>
+#include <spi.h>
+#include <nand.h>
+#include <usb.h>
+#include <fs.h>
+#include <mmc.h>
+#include <u-boot/sha1.h>
+#include <u-boot/sha256.h>
+
+#ifndef CONFIG_SYS_MMC_ENV_DEV
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+#if defined(CONFIG_ARMADA_8K)
+#define MAIN_HDR_MAGIC         0xB105B002
+
+struct mvebu_image_header {
+       u32     magic;                  /*  0-3  */
+       u32     prolog_size;            /*  4-7  */
+       u32     prolog_checksum;        /*  8-11 */
+       u32     boot_image_size;        /* 12-15 */
+       u32     boot_image_checksum;    /* 16-19 */
+       u32     rsrvd0;                 /* 20-23 */
+       u32     load_addr;              /* 24-27 */
+       u32     exec_addr;              /* 28-31 */
+       u8      uart_cfg;               /*  32   */
+       u8      baudrate;               /*  33   */
+       u8      ext_count;              /*  34   */
+       u8      aux_flags;              /*  35   */
+       u32     io_arg_0;               /* 36-39 */
+       u32     io_arg_1;               /* 40-43 */
+       u32     io_arg_2;               /* 43-47 */
+       u32     io_arg_3;               /* 48-51 */
+       u32     rsrvd1;                 /* 52-55 */
+       u32     rsrvd2;                 /* 56-59 */
+       u32     rsrvd3;                 /* 60-63 */
+};
+#elif defined(CONFIG_ARMADA_3700)      /* A3700 */
+#define HASH_SUM_LEN           16
+#define IMAGE_VERSION_3_6_0    0x030600
+#define IMAGE_VERSION_3_5_0    0x030500
+
+struct common_tim_data {
+       u32     version;
+       u32     identifier;
+       u32     trusted;
+       u32     issue_date;
+       u32     oem_unique_id;
+       u32     reserved[5];            /* Reserve 20 bytes */
+       u32     boot_flash_sign;
+       u32     num_images;
+       u32     num_keys;
+       u32     size_of_reserved;
+};
+
+struct mvebu_image_info {
+       u32     image_id;
+       u32     next_image_id;
+       u32     flash_entry_addr;
+       u32     load_addr;
+       u32     image_size;
+       u32     image_size_to_hash;
+       u32     hash_algorithm_id;
+       u32     hash[HASH_SUM_LEN];     /* Reserve 512 bits for the hash */
+       u32     partition_number;
+       u32     enc_algorithm_id;
+       u32     encrypt_start_offset;
+       u32     encrypt_size;
+};
+#endif /* CONFIG_ARMADA_XXX */
+
+struct bubt_dev {
+       char name[8];
+       size_t (*read)(const char *file_name);
+       int (*write)(size_t image_size);
+       int (*active)(void);
+};
+
+static ulong get_load_addr(void)
+{
+       const char *addr_str;
+       unsigned long addr;
+
+       addr_str = getenv("loadaddr");
+       if (addr_str)
+               addr = simple_strtoul(addr_str, NULL, 16);
+       else
+               addr = CONFIG_SYS_LOAD_ADDR;
+
+       return addr;
+}
+
+/********************************************************************
+ *     eMMC services
+ ********************************************************************/
+#ifdef CONFIG_DM_MMC
+static int mmc_burn_image(size_t image_size)
+{
+       struct mmc      *mmc;
+       lbaint_t        start_lba;
+       lbaint_t        blk_count;
+       ulong           blk_written;
+       int             err;
+       const u8        mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+
+       mmc = find_mmc_device(mmc_dev_num);
+       if (!mmc) {
+               printf("No SD/MMC/eMMC card found\n");
+               return -ENOMEDIUM;
+       }
+
+       err = mmc_init(mmc);
+       if (err) {
+               printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
+                      mmc_dev_num);
+               return err;
+       }
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+       if (mmc->part_num != CONFIG_SYS_MMC_ENV_PART) {
+               err = mmc_switch_part(mmc_dev_num, CONFIG_SYS_MMC_ENV_PART);
+               if (err) {
+                       printf("MMC partition switch failed\n");
+                       return err;
+               }
+       }
+#endif
+
+       /* SD reserves LBA-0 for MBR and boots from LBA-1,
+        * MMC/eMMC boots from LBA-0
+        */
+       start_lba = IS_SD(mmc) ? 1 : 0;
+       blk_count = image_size / mmc->block_dev.blksz;
+       if (image_size % mmc->block_dev.blksz)
+               blk_count += 1;
+
+       blk_written = mmc->block_dev.block_write(mmc_dev_num,
+                                               start_lba, blk_count,
+                                               (void *)get_load_addr());
+       if (blk_written != blk_count) {
+               printf("Error - written %#lx blocks\n", blk_written);
+               return -ENOSPC;
+       }
+       printf("Done!\n");
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+       if (mmc->part_num != CONFIG_SYS_MMC_ENV_PART)
+               mmc_switch_part(mmc_dev_num, mmc->part_num);
+#endif
+
+       return 0;
+}
+
+static size_t mmc_read_file(const char *file_name)
+{
+       loff_t          act_read = 0;
+       int             rc;
+       struct mmc      *mmc;
+       const u8        mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+
+       mmc = find_mmc_device(mmc_dev_num);
+       if (!mmc) {
+               printf("No SD/MMC/eMMC card found\n");
+               return 0;
+       }
+
+       if (mmc_init(mmc)) {
+               printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
+                      mmc_dev_num);
+               return 0;
+       }
+
+       /* Load from data partition (0) */
+       if (fs_set_blk_dev("mmc", "0", FS_TYPE_ANY)) {
+               printf("Error: MMC 0 not found\n");
+               return 0;
+       }
+
+       /* Perfrom file read */
+       rc = fs_read(file_name, get_load_addr(), 0, 0, &act_read);
+       if (rc)
+               return 0;
+
+       return act_read;
+}
+
+static int is_mmc_active(void)
+{
+       return 1;
+}
+#else /* CONFIG_DM_MMC */
+static int mmc_burn_image(size_t image_size)
+{
+       return -ENODEV;
+}
+
+static size_t mmc_read_file(const char *file_name)
+{
+       return 0;
+}
+
+static int is_mmc_active(void)
+{
+       return 0;
+}
+#endif /* CONFIG_DM_MMC */
+
+/********************************************************************
+ *     SPI services
+ ********************************************************************/
+#ifdef CONFIG_SPI_FLASH
+static int spi_burn_image(size_t image_size)
+{
+       int ret;
+       struct spi_flash *flash;
+       u32 erase_bytes;
+
+       /* Probe the SPI bus to get the flash device */
+       flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
+                               CONFIG_ENV_SPI_CS,
+                               CONFIG_SF_DEFAULT_SPEED,
+                               CONFIG_SF_DEFAULT_MODE);
+       if (!flash) {
+               printf("Failed to probe SPI Flash\n");
+               return -ENOMEDIUM;
+       }
+
+#ifdef CONFIG_SPI_FLASH_PROTECTION
+       spi_flash_protect(flash, 0);
+#endif
+       erase_bytes = image_size +
+               (flash->erase_size - image_size % flash->erase_size);
+       printf("Erasing %d bytes (%d blocks) at offset 0 ...",
+              erase_bytes, erase_bytes / flash->erase_size);
+       ret = spi_flash_erase(flash, 0, erase_bytes);
+       if (ret)
+               printf("Error!\n");
+       else
+               printf("Done!\n");
+
+       printf("Writing %d bytes from 0x%lx to offset 0 ...",
+              (int)image_size, get_load_addr());
+       ret = spi_flash_write(flash, 0, image_size, (void *)get_load_addr());
+       if (ret)
+               printf("Error!\n");
+       else
+               printf("Done!\n");
+
+#ifdef CONFIG_SPI_FLASH_PROTECTION
+       spi_flash_protect(flash, 1);
+#endif
+
+       return ret;
+}
+
+static int is_spi_active(void)
+{
+       return 1;
+}
+
+#else /* CONFIG_SPI_FLASH */
+static int spi_burn_image(size_t image_size)
+{
+       return -ENODEV;
+}
+
+static int is_spi_active(void)
+{
+       return 0;
+}
+#endif /* CONFIG_SPI_FLASH */
+
+/********************************************************************
+ *     NAND services
+ ********************************************************************/
+#ifdef CONFIG_CMD_NAND
+static int nand_burn_image(size_t image_size)
+{
+       int ret, block_size;
+       nand_info_t *nand;
+       int dev = nand_curr_device;
+
+       if ((dev < 0) || (dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
+           (!nand_info[dev].name)) {
+               puts("\nno devices available\n");
+               return -ENOMEDIUM;
+       }
+       nand = &nand_info[dev];
+       block_size = nand->erasesize;
+
+       /* Align U-Boot size to currently used blocksize */
+       image_size = ((image_size + (block_size - 1)) & (~(block_size - 1)));
+
+       /* Erase the U-BOOT image space */
+       printf("Erasing 0x%x - 0x%x:...", 0, (int)image_size);
+       ret = nand_erase(nand, 0, image_size);
+       if (ret) {
+               printf("Error!\n");
+               goto error;
+       }
+       printf("Done!\n");
+
+       /* Write the image to flash */
+       printf("Writing image:...");
+       printf("&image_size = 0x%p\n", (void *)&image_size);
+       ret = nand_write(nand, 0, &image_size, (void *)get_load_addr());
+       if (ret)
+               printf("Error!\n");
+       else
+               printf("Done!\n");
+
+error:
+       return ret;
+}
+
+static int is_nand_active(void)
+{
+       return 1;
+}
+
+#else /* CONFIG_CMD_NAND */
+static int nand_burn_image(size_t image_size)
+{
+       return -ENODEV;
+}
+
+static int is_nand_active(void)
+{
+       return 0;
+}
+#endif /* CONFIG_CMD_NAND */
+
+/********************************************************************
+ *     USB services
+ ********************************************************************/
+#if defined(CONFIG_USB_STORAGE) && defined(CONFIG_BLK)
+static size_t usb_read_file(const char *file_name)
+{
+       loff_t act_read = 0;
+       struct udevice *dev;
+       int rc;
+
+       usb_stop();
+
+       if (usb_init() < 0) {
+               printf("Error: usb_init failed\n");
+               return 0;
+       }
+
+       /* Try to recognize storage devices immediately */
+       blk_first_device(IF_TYPE_USB, &dev);
+       if (!dev) {
+               printf("Error: USB storage device not found\n");
+               return 0;
+       }
+
+       /* Always load from usb 0 */
+       if (fs_set_blk_dev("usb", "0", FS_TYPE_ANY)) {
+               printf("Error: USB 0 not found\n");
+               return 0;
+       }
+
+       /* Perfrom file read */
+       rc = fs_read(file_name, get_load_addr(), 0, 0, &act_read);
+       if (rc)
+               return 0;
+
+       return act_read;
+}
+
+static int is_usb_active(void)
+{
+       return 1;
+}
+
+#else /* defined(CONFIG_USB_STORAGE) && defined (CONFIG_BLK) */
+static size_t usb_read_file(const char *file_name)
+{
+       return 0;
+}
+
+static int is_usb_active(void)
+{
+       return 0;
+}
+#endif /* defined(CONFIG_USB_STORAGE) && defined (CONFIG_BLK) */
+
+/********************************************************************
+ *     Network services
+ ********************************************************************/
+#ifdef CONFIG_CMD_NET
+static size_t tftp_read_file(const char *file_name)
+{
+       /* update global variable load_addr before tftp file from network */
+       load_addr = get_load_addr();
+       return net_loop(TFTPGET);
+}
+
+static int is_tftp_active(void)
+{
+       return 1;
+}
+
+#else
+static size_t tftp_read_file(const char *file_name)
+{
+       return 0;
+}
+
+static int is_tftp_active(void)
+{
+       return 0;
+}
+#endif /* CONFIG_CMD_NET */
+
+enum bubt_devices {
+       BUBT_DEV_NET = 0,
+       BUBT_DEV_USB,
+       BUBT_DEV_MMC,
+       BUBT_DEV_SPI,
+       BUBT_DEV_NAND,
+
+       BUBT_MAX_DEV
+};
+
+struct bubt_dev bubt_devs[BUBT_MAX_DEV] = {
+       {"tftp", tftp_read_file, NULL, is_tftp_active},
+       {"usb",  usb_read_file,  NULL, is_usb_active},
+       {"mmc",  mmc_read_file,  mmc_burn_image, is_mmc_active},
+       {"spi",  NULL, spi_burn_image,  is_spi_active},
+       {"nand", NULL, nand_burn_image, is_nand_active},
+};
+
+static int bubt_write_file(struct bubt_dev *dst, size_t image_size)
+{
+       if (!dst->write) {
+               printf("Error: Write not supported on device %s\n", dst->name);
+               return -ENOTSUPP;
+       }
+
+       return dst->write(image_size);
+}
+
+#if defined(CONFIG_ARMADA_8K)
+u32 do_checksum32(u32 *start, int32_t len)
+{
+       u32 sum = 0;
+       u32 *startp = start;
+
+       do {
+               sum += *startp;
+               startp++;
+               len -= 4;
+       } while (len > 0);
+
+       return sum;
+}
+
+static int check_image_header(void)
+{
+       struct mvebu_image_header *hdr =
+                       (struct mvebu_image_header *)get_load_addr();
+       u32 header_len = hdr->prolog_size;
+       u32 checksum;
+       u32 checksum_ref = hdr->prolog_checksum;
+
+       /*
+        * For now compare checksum, and magic. Later we can
+        * verify more stuff on the header like interface type, etc
+        */
+       if (hdr->magic != MAIN_HDR_MAGIC) {
+               printf("ERROR: Bad MAGIC 0x%08x != 0x%08x\n",
+                      hdr->magic, MAIN_HDR_MAGIC);
+               return -ENOEXEC;
+       }
+
+       /* The checksum value is discarded from checksum calculation */
+       hdr->prolog_checksum = 0;
+
+       checksum = do_checksum32((u32 *)hdr, header_len);
+       if (checksum != checksum_ref) {
+               printf("Error: Bad Image checksum. 0x%x != 0x%x\n",
+                      checksum, checksum_ref);
+               return -ENOEXEC;
+       }
+
+       /* Restore the checksum before writing */
+       hdr->prolog_checksum = checksum_ref;
+       printf("Image checksum...OK!\n");
+
+       return 0;
+}
+#elif defined(CONFIG_ARMADA_3700) /* Armada 3700 */
+static int check_image_header(void)
+{
+       struct common_tim_data *hdr = (struct common_tim_data *)get_load_addr();
+       int image_num;
+       u8 hash_160_output[SHA1_SUM_LEN];
+       u8 hash_256_output[SHA256_SUM_LEN];
+       sha1_context hash1_text;
+       sha256_context hash256_text;
+       u8 *hash_output;
+       u32 hash_algorithm_id;
+       u32 image_size_to_hash;
+       u32 flash_entry_addr;
+       u32 *hash_value;
+       u32 internal_hash[HASH_SUM_LEN];
+       const u8 *buff;
+       u32 num_of_image = hdr->num_images;
+       u32 version = hdr->version;
+       u32 trusted = hdr->trusted;
+
+       /* bubt checksum validation only supports nontrusted images */
+       if (trusted == 1) {
+               printf("bypass image validation, ");
+               printf("only untrusted image is supported now\n");
+               return 0;
+       }
+       /* only supports image version 3.5 and 3.6 */
+       if (version != IMAGE_VERSION_3_5_0 && version != IMAGE_VERSION_3_6_0) {
+               printf("Error: Unsupported Image version = 0x%08x\n", version);
+               return -ENOEXEC;
+       }
+       /* validate images hash value */
+       for (image_num = 0; image_num < num_of_image; image_num++) {
+               struct mvebu_image_info *info =
+                               (struct mvebu_image_info *)(get_load_addr() +
+                               sizeof(struct common_tim_data) +
+                               image_num * sizeof(struct mvebu_image_info));
+               hash_algorithm_id = info->hash_algorithm_id;
+               image_size_to_hash = info->image_size_to_hash;
+               flash_entry_addr = info->flash_entry_addr;
+               hash_value = info->hash;
+               buff = (const u8 *)(get_load_addr() + flash_entry_addr);
+
+               if (image_num == 0) {
+                       /*
+                        * The first image includes hash values in its content.
+                        * For hash calculation, we need to save the original
+                        * hash values to a local variable that will be
+                        * copied back for comparsion and set all zeros to
+                        * the orignal hash values for calculating new value.
+                        * First image original format :
+                        * x...x (datum1) x...x(orig. hash values) x...x(datum2)
+                        * Replaced first image format :
+                        * x...x (datum1) 0...0(hash values) x...x(datum2)
+                        */
+                       memcpy(internal_hash, hash_value,
+                              sizeof(internal_hash));
+                       memset(hash_value, 0, sizeof(internal_hash));
+               }
+               if (image_size_to_hash == 0) {
+                       printf("Warning: Image_%d hash checksum is disabled, ",
+                              image_num);
+                       printf("skip the image validation.\n");
+                       continue;
+               }
+               switch (hash_algorithm_id) {
+               case SHA1_SUM_LEN:
+                       sha1_starts(&hash1_text);
+                       sha1_update(&hash1_text, buff, image_size_to_hash);
+                       sha1_finish(&hash1_text, hash_160_output);
+                       hash_output = hash_160_output;
+                       break;
+               case SHA256_SUM_LEN:
+                       sha256_starts(&hash256_text);
+                       sha256_update(&hash256_text, buff, image_size_to_hash);
+                       sha256_finish(&hash256_text, hash_256_output);
+                       hash_output = hash_256_output;
+                       break;
+               default:
+                       printf("Error: Unsupported hash_algorithm_id = %d\n",
+                              hash_algorithm_id);
+                       return -ENOEXEC;
+               }
+               if (image_num == 0)
+                       memcpy(hash_value, internal_hash,
+                              sizeof(internal_hash));
+               if (memcmp(hash_value, hash_output, hash_algorithm_id) != 0) {
+                       printf("Error: Image_%d checksum is not correct\n",
+                              image_num);
+                       return -ENOEXEC;
+               }
+       }
+       printf("Image checksum...OK!\n");
+
+       return 0;
+}
+
+#else /* Not ARMADA? */
+static int check_image_header(void)
+{
+       printf("bubt cmd does not support this SoC device or family!\n");
+       return -ENOEXEC;
+}
+#endif
+
+static int bubt_verify(size_t image_size)
+{
+       int err;
+
+       /* Check a correct image header exists */
+       err = check_image_header();
+       if (err) {
+               printf("Error: Image header verification failed\n");
+               return err;
+       }
+
+       return 0;
+}
+
+static int bubt_read_file(struct bubt_dev *src)
+{
+       size_t image_size;
+
+       if (!src->read) {
+               printf("Error: Read not supported on device \"%s\"\n",
+                      src->name);
+               return 0;
+       }
+
+       image_size = src->read(net_boot_file_name);
+       if (image_size <= 0) {
+               printf("Error: Failed to read file %s from %s\n",
+                      net_boot_file_name, src->name);
+               return 0;
+       }
+
+       return image_size;
+}
+
+static int bubt_is_dev_active(struct bubt_dev *dev)
+{
+       if (!dev->active) {
+               printf("Device \"%s\" not supported by U-BOOT image\n",
+                      dev->name);
+               return 0;
+       }
+
+       if (!dev->active()) {
+               printf("Device \"%s\" is inactive\n", dev->name);
+               return 0;
+       }
+
+       return 1;
+}
+
+struct bubt_dev *find_bubt_dev(char *dev_name)
+{
+       int dev;
+
+       for (dev = 0; dev < BUBT_MAX_DEV; dev++) {
+               if (strcmp(bubt_devs[dev].name, dev_name) == 0)
+                       return &bubt_devs[dev];
+       }
+
+       return 0;
+}
+
+#define DEFAULT_BUBT_SRC "tftp"
+
+#ifndef DEFAULT_BUBT_DST
+#ifdef CONFIG_MVEBU_SPI_BOOT
+#define DEFAULT_BUBT_DST "spi"
+#elif defined(CONFIG_MVEBU_NAND_BOOT)
+#define DEFAULT_BUBT_DST "nand"
+#elif defined(CONFIG_MVEBU_MMC_BOOT)
+#define DEFAULT_BUBT_DST "mmc"
+else
+#define DEFAULT_BUBT_DST "error"
+#endif
+#endif /* DEFAULT_BUBT_DST */
+
+int do_bubt_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       struct bubt_dev *src, *dst;
+       size_t image_size;
+       char src_dev_name[8];
+       char dst_dev_name[8];
+       char *name;
+       int  err;
+
+       if (argc < 2)
+               copy_filename(net_boot_file_name,
+                             CONFIG_MVEBU_UBOOT_DFLT_NAME,
+                             sizeof(net_boot_file_name));
+       else
+               copy_filename(net_boot_file_name, argv[1],
+                             sizeof(net_boot_file_name));
+
+       if (argc >= 3) {
+               strncpy(dst_dev_name, argv[2], 8);
+       } else {
+               name = DEFAULT_BUBT_DST;
+               strncpy(dst_dev_name, name, 8);
+       }
+
+       if (argc >= 4)
+               strncpy(src_dev_name, argv[3], 8);
+       else
+               strncpy(src_dev_name, DEFAULT_BUBT_SRC, 8);
+
+       /* Figure out the destination device */
+       dst = find_bubt_dev(dst_dev_name);
+       if (!dst) {
+               printf("Error: Unknown destination \"%s\"\n", dst_dev_name);
+               return -EINVAL;
+       }
+
+       if (!bubt_is_dev_active(dst))
+               return -ENODEV;
+
+       /* Figure out the source device */
+       src = find_bubt_dev(src_dev_name);
+       if (!src) {
+               printf("Error: Unknown source \"%s\"\n", src_dev_name);
+               return 1;
+       }
+
+       if (!bubt_is_dev_active(src))
+               return -ENODEV;
+
+       printf("Burning U-BOOT image \"%s\" from \"%s\" to \"%s\"\n",
+              net_boot_file_name, src->name, dst->name);
+
+       image_size = bubt_read_file(src);
+       if (!image_size)
+               return -EIO;
+
+       err = bubt_verify(image_size);
+       if (err)
+               return err;
+
+       err = bubt_write_file(dst, image_size);
+       if (err)
+               return err;
+
+       return 0;
+}
+
+U_BOOT_CMD(
+       bubt, 4, 0, do_bubt_cmd,
+       "Burn a u-boot image to flash",
+       "[file-name] [destination [source]]\n"
+       "\t-file-name     The image file name to burn. Default = flash-image.bin\n"
+       "\t-destination   Flash to burn to [spi, nand, mmc]. Default = active boot device\n"
+       "\t-source        The source to load image from [tftp, usb, mmc]. Default = tftp\n"
+       "Examples:\n"
+       "\tbubt - Burn flash-image.bin from tftp to active boot device\n"
+       "\tbubt flash-image-new.bin nand - Burn flash-image-new.bin from tftp to NAND flash\n"
+       "\tbubt backup-flash-image.bin mmc usb - Burn backup-flash-image.bin from usb to MMC\n"
+
+);
diff --git a/doc/mvebu/cmd/bubt.txt b/doc/mvebu/cmd/bubt.txt
new file mode 100644 (file)
index 0000000..6f9f525
--- /dev/null
@@ -0,0 +1,64 @@
+BUBT (Burn ATF) command
+--------------------------
+Bubt command is used to burn a new ATF image to flash device.
+
+The bubt command gets the following parameters: ATF file name, destination device and source device.
+bubt [file-name] [destination [source]]
+       - file-name             Image file name to burn. default = flash-image.bin
+       - destination           Flash to burn to [spi, nand, mmc]. default = active flash
+       - source                Source to load image from [tftp, usb]. default = tftp
+
+Examples:
+       bubt                            - Burn flash-image.bin from tftp to active flash
+       bubt latest-spi.bin nand        - Burn latest-spi.bin from tftp to NAND flash
+
+Notes:
+- For the TFTP interface set serverip and ipaddr.
+- To burn image to SD/eMMC device, the target is defined
+  by parameters CONFIG_SYS_MMC_ENV_DEV and CONFIG_SYS_MMC_ENV_PART.
+
+Bubt command details (burn image step by-step)
+----------------------------------------------
+This section describes bubt command flow:
+
+1. Fetch the requested ATF image from an available interface (USB/SD/SATA/XDB, etc.)
+   into the DRAM, and place it at <load_address>
+   Example: when using the FAT file system on USB flash device:
+   # usb reset
+   # fatls usb 0 (see files in device)
+   # fatload usb 0 <load_address> <file_name>
+
+2. Erase the target device:
+       - NAND:         # nand erase 0 100000
+       - SPI:          # sf probe 0
+                       # sf erase 0 100000
+       - SD/eMMC:      # mmc dev <dev_id> <boot_partition>
+
+Notes:
+- The eMMC has 2 boot partitions (BOOT0 and BOOT1) and a user data partition (DATA).
+  The boot partitions are numbered as partition 1 and 2 in MMC driver.
+  Number 0 is used for user data partition and should not be utilized for storing
+  boot images and U-Boot environment in RAW mode since it will break file system
+  structures usually located here.
+  The default boot partition is BOOT0. It is selected by the following parameter:
+  CONFIG_SYS_MMC_ENV_PART=1
+  Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1.
+  Please never use partition number 0 here!
+  The eMMC has 2 boot partitions (BOOT0 and BOOT1) and a user data partition (DATA).
+  The boot partitions are numbered as partition 1 and 2 in MMC driver.
+  Number 0 is used for user data partition and should not be utilized for storing
+  boot images and U-Boot environment in RAW mode since it will break file system
+  structures usually located here.
+  The default boot partition is BOOT0. It is selected by the following parameter:
+  CONFIG_SYS_MMC_ENV_PART=1
+  Valid values for this parameter are 1 for BOOT0 and 2 for BOOT1.
+  Please never use partition number 0 here!
+- The partition number is ignored if the target device is SD card.
+- The boot image offset starts at block 0 for eMMC and block 1 for SD devices.
+  The block 0 on SD devices is left for MBR storage.
+
+3. Write the ATF image:
+       - NAND:         # nand write <load_address> 0 <ATF Size>
+       - SPI:          # sf write <load_address> 0 <ATF Size>
+       - SD/eMMC:      # mmc write <load_address> [0|1] <ATF Size>/<block_size>
+