*/
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
#include <input.h>
+#include <keyboard.h>
#include <key_matrix.h>
#include <stdio_dev.h>
#include <tegra-kbc.h>
};
/* keyboard controller config and state */
-static struct keyb {
- struct input_config input; /* The input layer */
+struct tegra_kbd_priv {
+ struct input_config *input; /* The input layer */
struct key_matrix matrix; /* The key matrix layer */
struct kbc_tegra *kbc; /* tegra keyboard controller */
unsigned char inited; /* 1 if keyboard has been inited */
unsigned char first_scan; /* 1 if this is our first key scan */
- unsigned char created; /* 1 if driver has been created */
/*
* After init we must wait a short time before polling the keyboard.
unsigned int start_time_ms; /* Time that we inited (in ms) */
unsigned int last_poll_ms; /* Time we should last polled */
unsigned int next_repeat_ms; /* Next time we repeat a key */
-} config;
+};
/**
* reads the keyboard fifo for current keypresses
*
- * @param config Keyboard config
+ * @param priv Keyboard private data
* @param fifo Place to put fifo results
* @param max_keycodes Maximum number of key codes to put in the fifo
* @return number of items put into fifo
*/
-static int tegra_kbc_find_keys(struct keyb *config, int *fifo,
+static int tegra_kbc_find_keys(struct tegra_kbd_priv *priv, int *fifo,
int max_keycodes)
{
struct key_matrix_key keys[KBC_MAX_KPENT], *key;
for (key = keys, i = 0; i < KBC_MAX_KPENT; i++, key++) {
/* Get next word */
if (!(i & 3))
- kp_ent = readl(&config->kbc->kp_ent[i / 4]);
+ kp_ent = readl(&priv->kbc->kp_ent[i / 4]);
key->valid = (kp_ent & KBC_KPENT_VALID) != 0;
key->row = (kp_ent >> 3) & 0xf;
/* Shift to get next entry */
kp_ent >>= 8;
}
- return key_matrix_decode(&config->matrix, keys, KBC_MAX_KPENT, fifo,
+ return key_matrix_decode(&priv->matrix, keys, KBC_MAX_KPENT, fifo,
max_keycodes);
}
* Note: if fifo_cnt is 0, we will tell the input layer that no keys are
* pressed.
*
- * @param config Keyboard config
+ * @param priv Keyboard private data
* @param fifo_cnt Number of entries in the keyboard fifo
*/
-static void process_fifo(struct keyb *config, int fifo_cnt)
+static void process_fifo(struct tegra_kbd_priv *priv, int fifo_cnt)
{
int fifo[KBC_MAX_KPENT];
int cnt = 0;
/* Always call input_send_keycodes() at least once */
do {
if (fifo_cnt)
- cnt = tegra_kbc_find_keys(config, fifo, KBC_MAX_KPENT);
+ cnt = tegra_kbc_find_keys(priv, fifo, KBC_MAX_KPENT);
- input_send_keycodes(&config->input, fifo, cnt);
+ input_send_keycodes(priv->input, fifo, cnt);
} while (--fifo_cnt > 0);
}
* Check the keyboard controller and emit ASCII characters for any keys that
* are pressed.
*
- * @param config Keyboard config
+ * @param priv Keyboard private data
*/
-static void check_for_keys(struct keyb *config)
+static void check_for_keys(struct tegra_kbd_priv *priv)
{
int fifo_cnt;
- if (!config->first_scan &&
- get_timer(config->last_poll_ms) < KBC_REPEAT_RATE_MS)
+ if (!priv->first_scan &&
+ get_timer(priv->last_poll_ms) < KBC_REPEAT_RATE_MS)
return;
- config->last_poll_ms = get_timer(0);
- config->first_scan = 0;
+ priv->last_poll_ms = get_timer(0);
+ priv->first_scan = 0;
/*
* Once we get here we know the keyboard has been scanned. So if there
* scan waiting for us, we know that nothing is held down.
*/
- fifo_cnt = (readl(&config->kbc->interrupt) >> 4) & 0xf;
- process_fifo(config, fifo_cnt);
+ fifo_cnt = (readl(&priv->kbc->interrupt) >> 4) & 0xf;
+ process_fifo(priv, fifo_cnt);
}
/**
* Wkup mode to Continous polling mode and the repoll time. We can
* deduct the time that's already elapsed.
*
- * @param config Keyboard config
+ * @param priv Keyboard private data
*/
-static void kbd_wait_for_fifo_init(struct keyb *config)
+static void kbd_wait_for_fifo_init(struct tegra_kbd_priv *priv)
{
- if (!config->inited) {
+ if (!priv->inited) {
unsigned long elapsed_time;
long delay_ms;
- elapsed_time = get_timer(config->start_time_ms);
- delay_ms = config->init_dly_ms - elapsed_time;
+ elapsed_time = get_timer(priv->start_time_ms);
+ delay_ms = priv->init_dly_ms - elapsed_time;
if (delay_ms > 0) {
udelay(delay_ms * 1000);
debug("%s: delay %ldms\n", __func__, delay_ms);
}
- config->inited = 1;
+ priv->inited = 1;
}
}
*/
static int tegra_kbc_check(struct input_config *input)
{
- kbd_wait_for_fifo_init(&config);
- check_for_keys(&config);
-
- return 1;
-}
+ struct tegra_kbd_priv *priv = dev_get_priv(input->dev);
-/**
- * Test if keys are available to be read
- *
- * @return 0 if no keys available, 1 if keys are available
- */
-static int kbd_tstc(struct stdio_dev *dev)
-{
- /* Just get input to do this for us */
- return input_tstc(&config.input);
-}
+ kbd_wait_for_fifo_init(priv);
+ check_for_keys(priv);
-/**
- * Read a key
- *
- * TODO: U-Boot wants 0 for no key, but Ctrl-@ is a valid key...
- *
- * @return ASCII key code, or 0 if no key, or -1 if error
- */
-static int kbd_getc(struct stdio_dev *dev)
-{
- /* Just get input to do this for us */
- return input_getc(&config.input);
+ return 1;
}
/* configures keyboard GPIO registers to use the rows and columns */
-static void config_kbc_gpio(struct kbc_tegra *kbc)
+static void config_kbc_gpio(struct tegra_kbd_priv *priv, struct kbc_tegra *kbc)
{
int i;
row_cfg &= ~r_mask;
col_cfg &= ~c_mask;
- if (i < config.matrix.num_rows) {
+ if (i < priv->matrix.num_rows) {
row_cfg |= ((i << 1) | 1) << r_shift;
} else {
- col_cfg |= (((i - config.matrix.num_rows) << 1) | 1)
+ col_cfg |= (((i - priv->matrix.num_rows) << 1) | 1)
<< c_shift;
}
/**
* Start up the keyboard device
*/
-static void tegra_kbc_open(void)
+static void tegra_kbc_open(struct tegra_kbd_priv *priv)
{
- struct kbc_tegra *kbc = config.kbc;
+ struct kbc_tegra *kbc = priv->kbc;
unsigned int scan_period;
u32 val;
* Before reading from the keyboard we must wait for the init_dly
* plus the rpt_delay, plus 2ms for the row scan time.
*/
- config.init_dly_ms = scan_period * 2 + 2;
+ priv->init_dly_ms = scan_period * 2 + 2;
val = KBC_DEBOUNCE_COUNT << KBC_DEBOUNCE_CNT_SHIFT;
val |= 1 << KBC_FIFO_TH_CNT_SHIFT; /* fifo interrupt threshold */
val |= KBC_CONTROL_KBC_EN; /* enable */
writel(val, &kbc->control);
- config.start_time_ms = get_timer(0);
- config.last_poll_ms = config.next_repeat_ms = get_timer(0);
- config.first_scan = 1;
+ priv->start_time_ms = get_timer(0);
+ priv->last_poll_ms = get_timer(0);
+ priv->next_repeat_ms = priv->last_poll_ms;
+ priv->first_scan = 1;
+}
+
+static int tegra_kbd_start(struct udevice *dev)
+{
+ struct tegra_kbd_priv *priv = dev_get_priv(dev);
+
+ /* Set up pin mux and enable the clock */
+ funcmux_select(PERIPH_ID_KBC, FUNCMUX_DEFAULT);
+ clock_enable(PERIPH_ID_KBC);
+ config_kbc_gpio(priv, priv->kbc);
+
+ tegra_kbc_open(priv);
+ debug("%s: Tegra keyboard ready\n", __func__);
+
+ return 0;
}
/**
*
* @return 0 if ok, -ve on error
*/
-static int init_tegra_keyboard(struct stdio_dev *dev)
+static int tegra_kbd_probe(struct udevice *dev)
{
- /* check if already created */
- if (config.created)
- return 0;
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
- int node;
-
- node = fdtdec_next_compatible(gd->fdt_blob, 0,
- COMPAT_NVIDIA_TEGRA20_KBC);
- if (node < 0) {
- debug("%s: cannot locate keyboard node\n", __func__);
- return node;
- }
- config.kbc = (struct kbc_tegra *)fdtdec_get_addr(gd->fdt_blob,
- node, "reg");
- if ((fdt_addr_t)config.kbc == FDT_ADDR_T_NONE) {
+ struct tegra_kbd_priv *priv = dev_get_priv(dev);
+ struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct stdio_dev *sdev = &uc_priv->sdev;
+ struct input_config *input = &uc_priv->input;
+ int node = dev->of_offset;
+ int ret;
+
+ priv->kbc = (struct kbc_tegra *)dev_get_addr(dev);
+ if ((fdt_addr_t)priv->kbc == FDT_ADDR_T_NONE) {
debug("%s: No keyboard register found\n", __func__);
- return -1;
+ return -EINVAL;
}
- input_set_delays(&config.input, KBC_REPEAT_DELAY_MS,
- KBC_REPEAT_RATE_MS);
+ input_set_delays(input, KBC_REPEAT_DELAY_MS, KBC_REPEAT_RATE_MS);
/* Decode the keyboard matrix information (16 rows, 8 columns) */
- if (key_matrix_init(&config.matrix, 16, 8, 1)) {
- debug("%s: Could not init key matrix\n", __func__);
- return -1;
+ ret = key_matrix_init(&priv->matrix, 16, 8, 1);
+ if (ret) {
+ debug("%s: Could not init key matrix: %d\n", __func__, ret);
+ return ret;
}
- if (key_matrix_decode_fdt(&config.matrix, gd->fdt_blob, node)) {
- debug("%s: Could not decode key matrix from fdt\n", __func__);
- return -1;
+ ret = key_matrix_decode_fdt(&priv->matrix, gd->fdt_blob, node);
+ if (ret) {
+ debug("%s: Could not decode key matrix from fdt: %d\n",
+ __func__, ret);
+ return ret;
}
- if (config.matrix.fn_keycode) {
- if (input_add_table(&config.input, KEY_FN, -1,
- config.matrix.fn_keycode,
- config.matrix.key_count))
- return -1;
+ if (priv->matrix.fn_keycode) {
+ ret = input_add_table(input, KEY_FN, -1,
+ priv->matrix.fn_keycode,
+ priv->matrix.key_count);
+ if (ret) {
+ debug("%s: input_add_table() failed\n", __func__);
+ return ret;
+ }
}
-#else
-#error "Tegra keyboard driver requires FDT definitions"
-#endif
-
- /* Set up pin mux and enable the clock */
- funcmux_select(PERIPH_ID_KBC, FUNCMUX_DEFAULT);
- clock_enable(PERIPH_ID_KBC);
- config_kbc_gpio(config.kbc);
- tegra_kbc_open();
- config.created = 1;
- debug("%s: Tegra keyboard ready\n", __func__);
+ /* Register the device. init_tegra_keyboard() will be called soon */
+ priv->input = input;
+ input->dev = dev;
+ input->read_keys = tegra_kbc_check;
+ input_add_tables(input);
+ strcpy(sdev->name, "tegra-kbc");
+ ret = input_stdio_register(sdev);
+ if (ret) {
+ debug("%s: input_stdio_register() failed\n", __func__);
+ return ret;
+ }
return 0;
}
-int drv_keyboard_init(void)
-{
- struct stdio_dev dev;
- char *stdinname = getenv("stdin");
- int error;
-
- if (input_init(&config.input, 0)) {
- debug("%s: Cannot set up input\n", __func__);
- return -1;
- }
- config.input.read_keys = tegra_kbc_check;
- input_add_tables(input);
+static const struct keyboard_ops tegra_kbd_ops = {
+ .start = tegra_kbd_start,
+};
- memset(&dev, '\0', sizeof(dev));
- strcpy(dev.name, "tegra-kbc");
- dev.flags = DEV_FLAGS_INPUT;
- dev.getc = kbd_getc;
- dev.tstc = kbd_tstc;
- dev.start = init_tegra_keyboard;
+static const struct udevice_id tegra_kbd_ids[] = {
+ { .compatible = "nvidia,tegra20-kbc" },
+ { }
+};
- /* Register the device. init_tegra_keyboard() will be called soon */
- error = input_stdio_register(&dev);
- if (error)
- return error;
-#ifdef CONFIG_CONSOLE_MUX
- error = iomux_doenv(stdin, stdinname);
- if (error)
- return error;
-#endif
- return 0;
-}
+U_BOOT_DRIVER(tegra_kbd) = {
+ .name = "tegra_kbd",
+ .id = UCLASS_KEYBOARD,
+ .of_match = tegra_kbd_ids,
+ .probe = tegra_kbd_probe,
+ .ops = &tegra_kbd_ops,
+ .priv_auto_alloc_size = sizeof(struct tegra_kbd_priv),
+};
projects / u-boot.git / commitdiff
