bool "Ethernut5 board"
select CPU_ARM926EJS
-config TARGET_TNY_A9260
- bool "Caloa TNY A9260 board"
- select CPU_ARM926EJS
-
config TARGET_SNAPPER9260
bool "Support snapper9260"
select CPU_ARM926EJS
select DM_SERIAL
select DM_GPIO
-config TARGET_AFEB9260
- bool "Support afeb9260"
- select CPU_ARM926EJS
-
config TARGET_AT91SAM9261EK
bool "Atmel at91sam9261 reference board"
select CPU_ARM926EJS
bool "Ronetix pm9263 board"
select CPU_ARM926EJS
-config TARGET_SBC35_A9G20
- bool "Support sbc35_a9g20"
- select CPU_ARM926EJS
-
config TARGET_STAMP9G20
bool "Support stamp9g20"
select CPU_ARM926EJS
source "board/atmel/sama5d4ek/Kconfig"
source "board/BuS/eb_cpux9k2/Kconfig"
source "board/eukrea/cpuat91/Kconfig"
-source "board/afeb9260/Kconfig"
source "board/bluewater/snapper9260/Kconfig"
source "board/BuS/vl_ma2sc/Kconfig"
-source "board/calao/sbc35_a9g20/Kconfig"
-source "board/calao/tny_a9260/Kconfig"
source "board/calao/usb_a9263/Kconfig"
source "board/egnite/ethernut5/Kconfig"
source "board/esd/meesc/Kconfig"
at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */
at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
+#if defined(CONFIG_AT91SAM9260EK)
/*
* use PA10, PA11 for ETX2, ETX3.
* PA23 and PA24 are for TWI EEPROM
+++ /dev/null
-if TARGET_AFEB9260
-
-config SYS_BOARD
- default "afeb9260"
-
-config SYS_CONFIG_NAME
- default "afeb9260"
-
-endif
+++ /dev/null
-AFEB9260 BOARD
-M: Sergey Lapin <slapin@ossfans.org>
-S: Maintained
-F: board/afeb9260/
-F: include/configs/afeb9260.h
-F: configs/afeb9260_defconfig
+++ /dev/null
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += afeb9260.o
-obj-y += partition.o
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <netdev.h>
-#include <net.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void afeb9260_nand_hw_init(void)
-{
- unsigned long csa;
- struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
- struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-
- /* Assign CS3 to NAND/SmartMedia Interface */
- csa = readl(&matrix->ebicsa);
- csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
- writel(csa, &matrix->ebicsa);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
- AT91_SMC_MODE_DBW_8 |
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-
-#ifdef CONFIG_MACB
-static void afeb9260_macb_hw_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-
-
- /* Enable EMAC clock */
- writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
-
-
- /*
- * Disable pull-up on:
- * RXDV (PA17) => PHY normal mode (not Test mode)
- * ERX0 (PA14) => PHY ADDR0
- * ERX1 (PA15) => PHY ADDR1
- * ERX2 (PA25) => PHY ADDR2
- * ERX3 (PA26) => PHY ADDR3
- * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- &pioa->pudr);
-
- at91_phy_reset();
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- &pioa->puer);
-
- at91_macb_hw_init();
-}
-#endif
-int board_early_init_f(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- /* Enable clocks for all PIOs */
- writel((1 << ATMEL_ID_PIOA) |
- (1 << ATMEL_ID_PIOB) |
- (1 << ATMEL_ID_PIOC),
- &pmc->pcer);
- return 0;
-}
-int board_init(void)
-{
- /* arch number of AT91SAM9260EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AFEB9260;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- at91_seriald_hw_init();
-#ifdef CONFIG_CMD_NAND
- afeb9260_nand_hw_init();
-#endif
- at91_spi0_hw_init((1 << 0) | (1 << 1));
-#ifdef CONFIG_MACB
- afeb9260_macb_hw_init();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(
- (void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
-
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x01);
-#endif
- return rc;
-}
+++ /dev/null
-CONFIG_SYS_TEXT_BASE = 0x21f00000
+++ /dev/null
-/*
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_CLEAR, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
-};
+++ /dev/null
-if TARGET_SBC35_A9G20
-
-config SYS_BOARD
- default "sbc35_a9g20"
-
-config SYS_VENDOR
- default "calao"
-
-config SYS_CONFIG_NAME
- default "sbc35_a9g20"
-
-endif
+++ /dev/null
-SBC35_A9G20 BOARD
-#M: Albin Tonnerre <albin.tonnerre@free-electrons.com>
-S: Orphan (since 2014-06)
-F: board/calao/sbc35_a9g20/
-F: include/configs/sbc35_a9g20.h
-F: configs/sbc35_a9g20_eeprom_defconfig
-F: configs/sbc35_a9g20_nandflash_defconfig
+++ /dev/null
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += sbc35_a9g20.o
-obj-$(CONFIG_ATMEL_SPI) += spi.o
+++ /dev/null
-CONFIG_SYS_TEXT_BASE = 0x23f00000
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free-Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void sbc35_a9g20_nand_hw_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
- struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
- unsigned long csa;
-
- /* Enable CS3 */
- csa = readl(&matrix->ebicsa);
- csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
- writel(csa, &matrix->ebicsa);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_MODE_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_MODE_DBW_8 |
-#endif
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
-
- writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void sbc35_a9g20_macb_hw_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-
- /* Enable EMAC clock */
- writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
-
- /*
- * Disable pull-up on:
- * RXDV (PA17) => PHY normal mode (not Test mode)
- * ERX0 (PA14) => PHY ADDR0
- * ERX1 (PA15) => PHY ADDR1
- * ERX2 (PA25) => PHY ADDR2
- * ERX3 (PA26) => PHY ADDR3
- * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- &pioa->pudr);
-
- at91_phy_reset();
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- &pioa->puer);
-
- at91_macb_hw_init();
-}
-#endif
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- at91_seriald_hw_init();
- sbc35_a9g20_nand_hw_init();
-#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4 | 1 << 5);
-#endif
-#ifdef CONFIG_MACB
- sbc35_a9g20_macb_hw_init();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(
- (void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
-#endif
- return rc;
-}
+++ /dev/null
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_spi.h>
-#include <asm/arch/gpio.h>
-#include <spi.h>
-
-#define SBC_A9260_CS0_PIN AT91_PIN_PA3
-#define SBC_A9260_CS1_PIN AT91_PIN_PC11
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && (cs == 1 || cs == 0);
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- if(slave->cs == 0)
- at91_set_gpio_value(SBC_A9260_CS0_PIN, 0);
- else if(slave->cs == 1)
- at91_set_gpio_value(SBC_A9260_CS1_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- if(slave->cs == 0)
- at91_set_gpio_value(SBC_A9260_CS0_PIN, 1);
- else if(slave->cs == 1)
- at91_set_gpio_value(SBC_A9260_CS1_PIN, 1);
-}
-
-void spi_init_f(void)
-{
- /* everything done in board_init */
-}
+++ /dev/null
-if TARGET_TNY_A9260
-
-config SYS_BOARD
- default "tny_a9260"
-
-config SYS_VENDOR
- default "calao"
-
-config SYS_CONFIG_NAME
- default "tny_a9260"
-
-endif
+++ /dev/null
-TNY_A9260 BOARD
-#M: Albin Tonnerre <albin.tonnerre@free-electrons.com>
-S: Orphan (since 2014-06)
-F: board/calao/tny_a9260/
-F: include/configs/tny_a9260.h
-F: configs/tny_a9260_eeprom_defconfig
-F: configs/tny_a9260_nandflash_defconfig
-F: configs/tny_a9g20_eeprom_defconfig
-F: configs/tny_a9g20_nandflash_defconfig
+++ /dev/null
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += tny_a9260.o
-obj-$(CONFIG_ATMEL_SPI) += spi.o
+++ /dev/null
-CONFIG_SYS_TEXT_BASE = 0x23f00000
+++ /dev/null
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_spi.h>
-#include <asm/arch/gpio.h>
-#include <spi.h>
-
-#define TNY_A9260_CS_PIN AT91_PIN_PC11
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- at91_set_gpio_value(TNY_A9260_CS_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- at91_set_gpio_value(TNY_A9260_CS_PIN, 1);
-}
-
-void spi_init_f(void)
-{
- /* everything done in board_init */
-}
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void tny_a9260_nand_hw_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
- struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
- unsigned long csa;
-
- /* Assign CS3 to NAND/SmartMedia Interface */
- csa = readl(&matrix->ebicsa);
- csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
- writel(csa, &matrix->ebicsa);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
- AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
- &smc->cs[3].setup);
- writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
- AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
- &smc->cs[3].pulse);
- writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
- &smc->cs[3].cycle);
- writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
- AT91_SMC_MODE_EXNW_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_MODE_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_MODE_DBW_8 |
-#endif
- AT91_SMC_MODE_TDF_CYCLE(2),
- &smc->cs[3].mode);
-
- writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
- /* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- at91_seriald_hw_init();
- tny_a9260_nand_hw_init();
- at91_spi0_hw_init(1 << 5);
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(
- (void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_AFEB9260=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_SBC35_A9G20=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_SBC35_A9G20=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_EEPROM"
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH"
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-korat powerpc ppc4xx - - Larry Johnson <lrj@acm.org>
-galaxy5200 powerpc mpc5xxx - - Eric Millbrandt <emillbrandt@dekaresearch.com>
-W7OLMC powerpc ppc4xx - - Erik Theisen <etheisen@mindspring.com>
-W7OLMG powerpc ppc4xx - - Erik Theisen <etheisen@mindspring.com>
-aev powerpc mpc5xxx - -
-TB5200 powerpc mpc5xxx - -
-JSE powerpc ppc4xx - - Stephen Williams <steve@icarus.com>
-BC3450 powerpc mpc5xxx - -
+afeb9260 arm arm926ejs - - Sergey Lapin <slapin@ossfans.org>
+tny_a9260 arm arm926ejs - - Albin Tonnerre <albin.tonnerre@free-electrons.com>
+sbc35_a9g20 arm arm926ejs - - Albin Tonnerre <albin.tonnerre@free-electrons.com>
+korat powerpc ppc4xx 5043045d 2015-03-17 Larry Johnson <lrj@acm.org>
+galaxy5200 powerpc mpc5xxx 41eb4e5c 2015-03-17 Eric Millbrandt <emillbrandt@dekaresearch.com>
+W7OLMC powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen@mindspring.com>
+W7OLMG powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen@mindspring.com>
+aev powerpc mpc5xxx 470ee8b1 2015-03-17
+TB5200 powerpc mpc5xxx 470ee8b1 2015-03-17
+JSE powerpc ppc4xx 2da8137b 2015-03-17 Stephen Williams <steve@icarus.com>
+BC3450 powerpc mpc5xxx f8296d69 2015-03-17
hawkboard arm arm926ejs cb957cda 2015-02-24 Syed Mohammed Khasim <sm.khasim@gmail.com>:Sughosh Ganu <urwithsughosh@gmail.com>
tnetv107x arm arm1176 50b82c4b 2015-02-24 Chan-Taek Park <c-park@ti.com>
a320evb arm arm920t 29fc6f24 2015-02-24 Po-Yu Chuang <ratbert@faraday-tech.com>
+++ /dev/null
-/*
- * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
- *
- * Configuation settings for the AFEB9260 board.
- * Based on configuration for AT91SAM9260-EK
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#define CONFIG_AT91SAM9260 /* Atmel AT91SAM9260 SoC*/
-#include <asm/arch/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE 0x21f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_AFEB9260 /* AFEB9260 Board */
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_PULLUP 1
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_USART3 /* USART 3 is DBGU */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
-
-#endif
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_NET_RETRY_COUNT 20
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_USB_STORAGE
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x21e00000
-
-#define CONFIG_SYS_USE_DATAFLASH_CS1
-#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 -\
- GENERATED_GBL_DATA_SIZE)
-
-/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-#define CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xa0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock2 " \
- "rw rootfstype=jffs2 panic=20"
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * Configuation settings for the Calao SBC35-A9G20 board
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* SoC type is defined in boards.cfg */
-#include <asm/hardware.h>
-#include <linux/sizes.h>
-
-#if defined(CONFIG_SYS_USE_NANDFLASH)
-#define CONFIG_ENV_IS_IN_NAND
-#else
-#define CONFIG_ENV_IS_IN_EEPROM
-#endif
-
-#define MACH_TYPE_SBC35_A9G20 1848
-#define CONFIG_MACH_TYPE MACH_TYPE_SBC35_A9G20
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* GPIO */
-#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-
-/* Serial */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/* SPI EEPROM */
-#define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SPI_M95XXX
-#define CONFIG_SYS_EEPROM_SIZE 0x10000
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-
-/* SPI RTC */
-#define CONFIG_CMD_DATE
-#define CONFIG_RTC_M41T94
-#define CONFIG_M41T94_SPI_BUS 0
-#define CONFIG_M41T94_SPI_CS 0
-
-/* NAND flash */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH 1
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-/* Env in EEPROM, bootstrap + u-boot in NAND*/
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 0x20
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-
-/* Env, bootstrap and u-boot in NAND */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000
-#endif
-
-#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=atmel_nand:16M(kernel)ro," \
- "120M(rootfs),-(other) " \
- "rw rootfstype=jffs2"
-
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * Configuation settings for the Calao TNY-A9260 and TNY-A9G20 boards
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * SoC must be defined first, before hardware.h is included.
- * In this case SoC is defined in boards.cfg.
- */
-#include <asm/hardware.h>
-
-#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH)
-#define CONFIG_ENV_IS_IN_NAND
-#else
-#define CONFIG_ENV_IS_IN_EEPROM
-#endif
-
-/* Define actual evaluation board type from used processor type */
-#ifdef CONFIG_AT91SAM9G20
-# define CONFIG_TNY_A9G20
-# define MACH_TYPE_TNY_A9G20 2059
-# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9G20
-#else
-# define CONFIG_TNY_A9260
-# define MACH_TYPE_TNY_A9260 2058
-# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9260
-#endif
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-# define CONFIG_SYS_INIT_SP_ADDR \
- (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* SPI EEPROM */
-#define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SPI_M95XXX
-#define CONFIG_SYS_EEPROM_SIZE 0x10000
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-
-/* NAND flash */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-/* Env in EEPROM, bootstrap + u-boot in NAND*/
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 0x20
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-
-/* Env, bootstrap and u-boot in NAND */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000
-#endif
-
-#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=atmel_nand:16M(kernel)ro," \
- "120M(rootfs),-(other) " \
- "rw rootfstype=jffs2"
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
-#endif
projects / u-boot.git / commitdiff
