Watchdog: introduce ARM SBSA watchdog driver

According to Server Base System Architecture (SBSA) specification,
the SBSA Generic Watchdog has two stage timeouts: the first signal
(WS0) is for alerting the system by interrupt, the second one (WS1) is a
real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)

This driver can operate ARM SBSA Generic Watchdog as a single stage
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index 6316c6ca00f8a5e49c9343ce659ca02b32180286..4c84c4da54d350a2e2de66566cd1fdf1898f7449 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -689,6 +689,7 @@ M:  Priyanka Jain <priyanka.jain@nxp.com>
 S:     Maintained
 T:     git https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git
 F:     drivers/watchdog/sp805_wdt.c
+F:     drivers/watchdog/sbsa_gwdt.c
 
 I2C
 M:     Heiko Schocher <hs@denx.de>

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index bf06180cddfca9c4e4b527f24fb1705b1668daff..6d5c4fcfebb0f472e78aa542c8e2068c37944aa6 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -163,6 +163,15 @@ config WDT_SANDBOX
          can be probed and supports all of the methods of WDT, but does not
          really do anything.
 
+config WDT_SBSA
+       bool "SBSA watchdog timer support"
+       depends on WDT
+       help
+          Select this to enable SBSA watchdog timer.
+          This driver can operate ARM SBSA Generic Watchdog as a single stage.
+          In the single stage mode, when the timeout is reached, your system
+          will be reset by WS1. The first signal (WS0) is ignored.
+
 config WDT_SP805
        bool "SP805 watchdog timer support"
        depends on WDT

diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 519bbd3a40fc4db15f84aa9631e50f9b770948d8..0f0b2eb5bcea1fd45f5b7e326b8d034e92b71013 100644 (file)
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
 obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
 obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
 obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
+obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
 obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
 obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
 obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o

diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c
new file mode 100644 (file)
index 0000000..2eae431
--- /dev/null
+++ b/drivers/watchdog/sbsa_gwdt.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for SBSA
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm/device.h>
+#include <dm/fdtaddr.h>
+#include <dm/read.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <watchdog.h>
+#include <wdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* SBSA Generic Watchdog register definitions */
+/* refresh frame */
+#define SBSA_GWDT_WRR          0x000
+
+/* control frame */
+#define SBSA_GWDT_WCS          0x000
+#define SBSA_GWDT_WOR          0x008
+#define SBSA_GWDT_WCV          0x010
+
+/* refresh/control frame */
+#define SBSA_GWDT_W_IIDR       0xfcc
+#define SBSA_GWDT_IDR          0xfd0
+
+/* Watchdog Control and Status Register */
+#define SBSA_GWDT_WCS_EN       BIT(0)
+#define SBSA_GWDT_WCS_WS0      BIT(1)
+#define SBSA_GWDT_WCS_WS1      BIT(2)
+
+struct sbsa_gwdt_priv {
+       void __iomem *reg_refresh;
+       void __iomem *reg_control;
+};
+
+static int sbsa_gwdt_reset(struct udevice *dev)
+{
+       struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+       writel(0, priv->reg_refresh + SBSA_GWDT_WRR);
+
+       return 0;
+}
+
+static int sbsa_gwdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+       struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+       u32 clk;
+
+       /*
+        * it work in the single stage mode in u-boot,
+        * The first signal (WS0) is ignored,
+        * the timeout is (WOR * 2), so the WOR should be configured
+        * to half value of timeout.
+        */
+       clk = get_tbclk();
+       writel(clk / 2 * timeout,
+              priv->reg_control + SBSA_GWDT_WOR);
+
+       /* writing WCS will cause an explicit watchdog refresh */
+       writel(SBSA_GWDT_WCS_EN, priv->reg_control + SBSA_GWDT_WCS);
+
+       return 0;
+}
+
+static int sbsa_gwdt_stop(struct udevice *dev)
+{
+       struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+       writel(0, priv->reg_control + SBSA_GWDT_WCS);
+
+       return 0;
+}
+
+static int sbsa_gwdt_expire_now(struct udevice *dev, ulong flags)
+{
+       sbsa_gwdt_start(dev, 0, flags);
+
+       return 0;
+}
+
+static int sbsa_gwdt_probe(struct udevice *dev)
+{
+       debug("%s: Probing wdt%u (sbsa-gwdt)\n", __func__, dev->seq);
+
+       return 0;
+}
+
+static int sbsa_gwdt_ofdata_to_platdata(struct udevice *dev)
+{
+       struct sbsa_gwdt_priv *priv = dev_get_priv(dev);
+
+       priv->reg_control = (void __iomem *)dev_read_addr_index(dev, 0);
+       if (IS_ERR(priv->reg_control))
+               return PTR_ERR(priv->reg_control);
+
+       priv->reg_refresh = (void __iomem *)dev_read_addr_index(dev, 1);
+       if (IS_ERR(priv->reg_refresh))
+               return PTR_ERR(priv->reg_refresh);
+
+       return 0;
+}
+
+static const struct wdt_ops sbsa_gwdt_ops = {
+       .start = sbsa_gwdt_start,
+       .reset = sbsa_gwdt_reset,
+       .stop = sbsa_gwdt_stop,
+       .expire_now = sbsa_gwdt_expire_now,
+};
+
+static const struct udevice_id sbsa_gwdt_ids[] = {
+       { .compatible = "arm,sbsa-gwdt" },
+       {}
+};
+
+U_BOOT_DRIVER(sbsa_gwdt) = {
+       .name = "sbsa_gwdt",
+       .id = UCLASS_WDT,
+       .of_match = sbsa_gwdt_ids,
+       .probe = sbsa_gwdt_probe,
+       .priv_auto_alloc_size = sizeof(struct sbsa_gwdt_priv),
+       .ofdata_to_platdata = sbsa_gwdt_ofdata_to_platdata,
+       .ops = &sbsa_gwdt_ops,
+};