]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mmc: sunxi: Fix mmc clocks for DM_MMC
authorJagan Teki <jagan@amarulasolutions.com>
Wed, 9 Jan 2019 11:28:39 +0000 (16:58 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Thu, 10 Jan 2019 09:15:15 +0000 (14:45 +0530)
Existing clock configure code has been followed based on the
legacy MMC dt node definitions and it cannot work with recent
dts(i) sync from Linux.

So, add clock configure code for Allwinner platforms which support
DM_MMC and eventually this will drop once CLK support is in Mainline.

Fixes: 3c92cca3cda0 ("ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Priit Laes <plaes@plaes.org> # Gemei G9 A10 Tablet
Tested-by: Marek Kraus <gamelasterv2@gmail.com> # A10-OLinuXino-Lime
drivers/mmc/sunxi_mmc.c

index 9bf040cb40871fdc3e730549dd5396f9c192d8e0..302332bf9794b65d24e4980b29b7f6820f7d5d9e 100644 (file)
 #include <asm/arch/mmc.h>
 #include <asm-generic/gpio.h>
 
+#ifdef CONFIG_DM_MMC
+struct sunxi_mmc_variant {
+       u16 gate_offset;
+       u16 mclk_offset;
+};
+#endif
+
 struct sunxi_mmc_plat {
        struct mmc_config cfg;
        struct mmc mmc;
@@ -32,6 +39,9 @@ struct sunxi_mmc_priv {
        int cd_inverted;                /* Inverted Card Detect */
        struct sunxi_mmc *reg;
        struct mmc_config cfg;
+#ifdef CONFIG_DM_MMC
+       const struct sunxi_mmc_variant *variant;
+#endif
 };
 
 #if !CONFIG_IS_ENABLED(DM_MMC)
@@ -599,7 +609,7 @@ static int sunxi_mmc_probe(struct udevice *dev)
        struct sunxi_mmc_priv *priv = dev_get_priv(dev);
        struct mmc_config *cfg = &plat->cfg;
        struct ofnode_phandle_args args;
-       u32 *gate_reg;
+       u32 *gate_reg, *ccu_reg;
        int bus_width, ret;
 
        cfg->name = dev->name;
@@ -618,21 +628,21 @@ static int sunxi_mmc_probe(struct udevice *dev)
        cfg->f_max = 52000000;
 
        priv->reg = (void *)dev_read_addr(dev);
+       priv->variant =
+               (const struct sunxi_mmc_variant *)dev_get_driver_data(dev);
 
        /* We don't have a sunxi clock driver so find the clock address here */
        ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
                                          1, &args);
        if (ret)
                return ret;
-       priv->mclkreg = (u32 *)ofnode_get_addr(args.node);
+       ccu_reg = (u32 *)ofnode_get_addr(args.node);
 
-       ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
-                                         0, &args);
-       if (ret)
-               return ret;
-       gate_reg = (u32 *)ofnode_get_addr(args.node);
-       setbits_le32(gate_reg, 1 << args.args[0]);
-       priv->mmc_no = args.args[0] - 8;
+       priv->mmc_no = ((uintptr_t)priv->reg - SUNXI_MMC0_BASE) / 0x1000;
+       priv->mclkreg = (void *)ccu_reg +
+                       (priv->variant->mclk_offset + (priv->mmc_no * 4));
+       gate_reg = (void *)ccu_reg + priv->variant->gate_offset;
+       setbits_le32(gate_reg, BIT(AHB_GATE_OFFSET_MMC(priv->mmc_no)));
 
        ret = mmc_set_mod_clk(priv, 24000000);
        if (ret)
@@ -665,11 +675,25 @@ static int sunxi_mmc_bind(struct udevice *dev)
        return mmc_bind(dev, &plat->mmc, &plat->cfg);
 }
 
+static const struct sunxi_mmc_variant sun4i_a10_variant = {
+       .gate_offset = 0x60,
+       .mclk_offset = 0x88,
+};
+
 static const struct udevice_id sunxi_mmc_ids[] = {
-       { .compatible = "allwinner,sun4i-a10-mmc" },
-       { .compatible = "allwinner,sun5i-a13-mmc" },
-       { .compatible = "allwinner,sun7i-a20-mmc" },
-       { }
+       {
+         .compatible = "allwinner,sun4i-a10-mmc",
+         .data = (ulong)&sun4i_a10_variant,
+       },
+       {
+         .compatible = "allwinner,sun5i-a13-mmc",
+         .data = (ulong)&sun4i_a10_variant,
+       },
+       {
+         .compatible = "allwinner,sun7i-a20-mmc",
+         .data = (ulong)&sun4i_a10_variant,
+       },
+       { /* sentinel */ }
 };
 
 U_BOOT_DRIVER(sunxi_mmc_drv) = {