doc: board: Convert i.MXRT1020 EVK README to reST

Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README
deleted file mode 100644 (file)
index 9bc5bc0..0000000
--- a/board/freescale/imxrt1020-evk/README
+++ /dev/null
@@ -1,31 +0,0 @@
-How to use U-Boot on NXP i.MXRT1020 EVK
------------------------------------------------
-
-- Build U-Boot for i.MXRT1020 EVK:
-
-$ make mrproper
-$ make imxrt1020-evk_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
-
-- Flash the u-boot.img image into the micro SD card:
-
-sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
-
-- Jumper settings:
-
-SW8: 0 1 1 0
-
-where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-- Connect the USB cable between the EVK and the PC for the console.
-(The USB console connector is the one close the ethernet connector)
-
-- Insert the micro SD card in the board, power it up and U-Boot messages should
-come up.

diff --git a/doc/board/freescale/imxrt1020-evk.rst b/doc/board/freescale/imxrt1020-evk.rst
new file mode 100644 (file)
index 0000000..267f80c
--- /dev/null
+++ b/doc/board/freescale/imxrt1020-evk.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imxrt1020-evk
+=============
+
+How to use U-Boot on NXP i.MXRT1020 EVK
+---------------------------------------
+
+- Build U-Boot for i.MXRT1020 EVK:
+
+.. code-block:: bash
+
+   $ make mrproper
+   $ make imxrt1020-evk_defconfig
+   $ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+.. code-block:: bash
+
+   $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync
+
+- Jumper settings::
+
+   SW8: 0 1 1 0
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Connect the USB cable between the EVK and the PC for the console.
+  The USB console connector is the one close the ethernet connector
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should come up.

diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst
index 6cd352565fe30c56280362bee94ef73e5acff4b4..81c4826bebe43ca669e963a9b5461ece190bb6cc 100644 (file)
--- a/doc/board/freescale/index.rst
+++ b/doc/board/freescale/index.rst
@@ -12,3 +12,4 @@ Freescale
    imx8mp_evk
    imx8mq_evk
    imx8qxp_mek
+   imxrt1020-evk