tools/binman/test directory.
+Special properties
+------------------
+
+Some entries support special properties, documented here:
+
+u-boot-with-ucode-ptr:
+ optional-ucode: boolean property to make microcode optional. If the
+ u-boot.bin image does not include microcode, no error will
+ be generated.
+
+
Order of image creation
-----------------------
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for 'u-boot'
+#
+
+import struct
+
+from entry import Entry
+from blob import Entry_blob
+
+FD_SIGNATURE = struct.pack('<L', 0x0ff0a55a)
+MAX_REGIONS = 5
+
+(REGION_DESCRIPTOR, REGION_BIOS, REGION_ME, REGION_GBE,
+ REGION_PDATA) = range(5)
+
+class Region:
+ def __init__(self, data, frba, region_num):
+ pos = frba + region_num * 4
+ val = struct.unpack('<L', data[pos:pos + 4])[0]
+ self.base = (val & 0xfff) << 12
+ self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
+ self.size = self.limit - self.base + 1
+
+class Entry_intel_descriptor(Entry_blob):
+ """Intel flash descriptor block (4KB)
+
+ This is placed at the start of flash and provides information about
+ the SPI flash regions. In particular it provides the base address and
+ size of the ME region, allowing us to place the ME binary in the right
+ place.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self._regions = []
+
+ def GetDefaultFilename(self):
+ return 'descriptor.bin'
+
+ def GetPositions(self):
+ pos = self.data.find(FD_SIGNATURE)
+ if pos == -1:
+ self.Raise('Cannot find FD signature')
+ flvalsig, flmap0, flmap1, flmap2 = struct.unpack('<LLLL',
+ self.data[pos:pos + 16])
+ frba = ((flmap0 >> 16) & 0xff) << 4
+ for i in range(MAX_REGIONS):
+ self._regions.append(Region(self.data, frba, i))
+
+ # Set the offset for ME only, for now, since the others are not used
+ return {'intel-me': [self._regions[REGION_ME].base,
+ self._regions[REGION_ME].size]}
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Management Engine binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_me(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'me.bin'
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for Intel Memory Reference Code binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_mrc(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'mrc.bin'
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for x86 VGA ROM binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_vga(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'vga.bin'
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+## Written by Simon Glass <sjg@chromium.org>
+
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for U-Boot device tree with the microcode removed
+#
+
+import fdt_select
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_dtb_with_ucode(Entry_blob):
+ """A U-Boot device tree file, with the microcode removed
+
+ See Entry_u_boot_ucode for full details of the 3 entries involved in this
+ process.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self.ucode_data = ''
+ self.collate = False
+ self.ucode_offset = None
+ self.ucode_size = None
+
+ def GetDefaultFilename(self):
+ return 'u-boot.dtb'
+
+ def ObtainContents(self):
+ Entry_blob.ObtainContents(self)
+
+ # If the image does not need microcode, there is nothing to do
+ ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+ if not ucode_dest_entry or not ucode_dest_entry.target_pos:
+ return True
+
+ # Create a new file to hold the copied device tree
+ dtb_name = 'u-boot-dtb-with-ucode.dtb'
+ fname = tools.GetOutputFilename(dtb_name)
+ with open(fname, 'wb') as fd:
+ fd.write(self.data)
+
+ # Remove the microcode
+ fdt = fdt_select.FdtScan(fname)
+ fdt.Scan()
+ ucode = fdt.GetNode('/microcode')
+ if not ucode:
+ raise self.Raise("No /microcode node found in '%s'" % fname)
+
+ # There's no need to collate it (move all microcode into one place)
+ # if we only have one chunk of microcode.
+ self.collate = len(ucode.subnodes) > 1
+ for node in ucode.subnodes:
+ data_prop = node.props.get('data')
+ if data_prop:
+ self.ucode_data += ''.join(data_prop.bytes)
+ if not self.collate:
+ poffset = data_prop.GetOffset()
+ if poffset is None:
+ # We cannot obtain a property offset. Collate instead.
+ self.collate = True
+ else:
+ # Find the offset in the device tree of the ucode data
+ self.ucode_offset = poffset + 12
+ self.ucode_size = len(data_prop.bytes)
+ if self.collate:
+ prop = node.DeleteProp('data')
+ if self.collate:
+ fdt.Pack()
+ fdt.Flush()
+
+ # Make this file the contents of this entry
+ self._pathname = fname
+ self.ReadContents()
+ return True
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_ucode(Entry_blob):
+ """U-Boot microcode block
+
+ U-Boot on x86 needs a single block of microcode. This is collected from
+ the various microcode update nodes in the device tree. It is also unable
+ to read the microcode from the device tree on platforms that use FSP
+ (Firmware Support Package) binaries, because the API requires that the
+ microcode is supplied before there is any SRAM available to use (i.e.
+ the FSP sets up the SRAM / cache-as-RAM but does so in the call that
+ requires the microcode!). To keep things simple, all x86 platforms handle
+ microcode the same way in U-Boot (even non-FSP platforms). This is that
+ a table is placed at _dt_ucode_base_size containing the base address and
+ size of the microcode. This is either passed to the FSP (for FSP
+ platforms), or used to set up the microcode (for non-FSP platforms).
+ This all happens in the build system since it is the only way to get
+ the microcode into a single blob and accessible without SRAM.
+
+ There are two cases to handle. If there is only one microcode blob in
+ the device tree, then the ucode pointer it set to point to that. This
+ entry (u-boot-ucode) is empty. If there is more than one update, then
+ this entry holds the concatenation of all updates, and the device tree
+ entry (u-boot-dtb-with-ucode) is updated to remove the microcode. This
+ last step ensures that that the microcode appears in one contiguous
+ block in the image and is not unnecessarily duplicated in the device
+ tree. It is referred to as 'collation' here.
+
+ Entry types that have a part to play in handling microcode:
+
+ Entry_u_boot_with_ucode_ptr:
+ Contains u-boot-nodtb.bin (i.e. U-Boot without the device tree).
+ It updates it with the address and size of the microcode so that
+ U-Boot can find it early on start-up.
+ Entry_u_boot_dtb_with_ucode:
+ Contains u-boot.dtb. It stores the microcode in a
+ 'self.ucode_data' property, which is then read by this class to
+ obtain the microcode if needed. If collation is performed, it
+ removes the microcode from the device tree.
+ Entry_u_boot_ucode:
+ This class. If collation is enabled it reads the microcode from
+ the Entry_u_boot_dtb_with_ucode entry, and uses it as the
+ contents of this entry.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def ObtainContents(self):
+ # If the image does not need microcode, there is nothing to do
+ ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+ if ucode_dest_entry and not ucode_dest_entry.target_pos:
+ self.data = ''
+ return True
+
+ # Get the microcode from the device tree entry
+ fdt_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+ if not fdt_entry or not fdt_entry.ucode_data:
+ return False
+
+ if not fdt_entry.collate:
+ # This section can be empty
+ self.data = ''
+ return True
+
+ # Write it out to a file
+ dtb_name = 'u-boot-ucode.bin'
+ fname = tools.GetOutputFilename(dtb_name)
+ with open(fname, 'wb') as fd:
+ fd.write(fdt_entry.ucode_data)
+
+ self._pathname = fname
+ self.ReadContents()
+
+ return True
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+import struct
+
+import command
+from entry import Entry
+from blob import Entry_blob
+import fdt_util
+import tools
+
+class Entry_u_boot_with_ucode_ptr(Entry_blob):
+ """U-Boot with embedded microcode pointer
+
+ See Entry_u_boot_ucode for full details of the 3 entries involved in this
+ process.
+ """
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+ self.elf_fname = 'u-boot'
+ self.target_pos = None
+
+ def GetDefaultFilename(self):
+ return 'u-boot-nodtb.bin'
+
+ def ObtainContents(self):
+ # Figure out where to put the microcode pointer
+ fname = tools.GetInputFilename(self.elf_fname)
+ args = [['nm', fname], ['grep', '-w', '_dt_ucode_base_size']]
+ out = (command.RunPipe(args, capture=True, raise_on_error=False).
+ stdout.splitlines())
+ if len(out) == 1:
+ self.target_pos = int(out[0].split()[0], 16)
+ elif not fdt_util.GetBool(self._node, 'optional-ucode'):
+ self.Raise('Cannot locate _dt_ucode_base_size symbol in u-boot')
+
+ return Entry_blob.ObtainContents(self)
+
+ def ProcessContents(self):
+ # If the image does not need microcode, there is nothing to do
+ if not self.target_pos:
+ return
+
+ # Get the position of the microcode
+ ucode_entry = self.image.FindEntryType('u-boot-ucode')
+ if not ucode_entry:
+ self.Raise('Cannot find microcode region u-boot-ucode')
+
+ # Check the target pos is in the image. If it is not, then U-Boot is
+ # being linked incorrectly, or is being placed at the wrong position
+ # in the image.
+ #
+ # The image must be set up so that U-Boot is placed at the
+ # flash address to which it is linked. For example, if
+ # CONFIG_SYS_TEXT_BASE is 0xfff00000, and the ROM is 8MB, then
+ # the U-Boot region must start at position 7MB in the image. In this
+ # case the ROM starts at 0xff800000, so the position of the first
+ # entry in the image corresponds to that.
+ if (self.target_pos < self.pos or
+ self.target_pos >= self.pos + self.size):
+ self.Raise('Microcode pointer _dt_ucode_base_size at %08x is '
+ 'outside the image ranging from %08x to %08x' %
+ (self.target_pos, self.pos, self.pos + self.size))
+
+ # Get the microcode, either from u-boot-ucode or u-boot-dtb-with-ucode.
+ # If we have left the microcode in the device tree, then it will be
+ # in the former. If we extracted the microcode from the device tree
+ # and collated it in one place, it will be in the latter.
+ if ucode_entry.size:
+ pos, size = ucode_entry.pos, ucode_entry.size
+ else:
+ dtb_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+ if not dtb_entry:
+ self.Raise('Cannot find microcode region u-boot-dtb-with-ucode')
+ pos = dtb_entry.pos + dtb_entry.ucode_offset
+ size = dtb_entry.ucode_size
+
+ # Write the microcode position and size into the entry
+ pos_and_size = struct.pack('<2L', pos, size)
+ self.target_pos -= self.pos
+ self.data = (self.data[:self.target_pos] + pos_and_size +
+ self.data[self.target_pos + 8:])
--- /dev/null
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Entry-type module for the 16-bit x86 start-up code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_start16(Entry_blob):
+ def __init__(self, image, etype, node):
+ Entry_blob.__init__(self, image, etype, node)
+
+ def GetDefaultFilename(self):
+ return 'u-boot-x86-16bit.bin'
TestFunctional._MakeInputFile('u-boot.img', U_BOOT_IMG_DATA)
TestFunctional._MakeInputFile('spl/u-boot-spl.bin', U_BOOT_SPL_DATA)
TestFunctional._MakeInputFile('blobfile', BLOB_DATA)
+ TestFunctional._MakeInputFile('me.bin', ME_DATA)
+ TestFunctional._MakeInputFile('vga.bin', VGA_DATA)
TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+ TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA)
TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA)
self._output_setup = False
+ # ELF file with a '_dt_ucode_base_size' symbol
+ with open(self.TestFile('u_boot_ucode_ptr')) as fd:
+ TestFunctional._MakeInputFile('u-boot', fd.read())
+
+ # Intel flash descriptor file
+ with open(self.TestFile('descriptor.bin')) as fd:
+ TestFunctional._MakeInputFile('descriptor.bin', fd.read())
+
@classmethod
def tearDownClass(self):
"""Remove the temporary input directory and its contents"""
'-d', self.TestFile(fname))
def _SetupDtb(self, fname, outfile='u-boot.dtb'):
+ """Set up a new test device-tree file
+
+ The given file is compiled and set up as the device tree to be used
+ for ths test.
+
+ Args:
+ fname: Filename of .dts file to read
+ outfile: Output filename for compiled device tree binary
+
+ Returns:
+ Contents of device tree binary
+ """
if not self._output_setup:
tools.PrepareOutputDir(self._indir, True)
self._output_setup = True
with open(dtb) as fd:
data = fd.read()
TestFunctional._MakeInputFile(outfile, data)
+ return data
- def _DoReadFile(self, fname, use_real_dtb=False):
+ def _DoReadFileDtb(self, fname, use_real_dtb=False):
"""Run binman and return the resulting image
This runs binman with a given test file and then reads the resulting
the u-boot-dtb entry. Normally this is not needed and the
test contents (the U_BOOT_DTB_DATA string) can be used.
But in some test we need the real contents.
+
+ Returns:
+ Tuple:
+ Resulting image contents
+ Device tree contents
"""
+ dtb_data = None
# Use the compiled test file as the u-boot-dtb input
if use_real_dtb:
- self._SetupDtb(fname)
+ dtb_data = self._SetupDtb(fname)
try:
retcode = self._DoTestFile(fname)
fname = tools.GetOutputFilename('image.bin')
self.assertTrue(os.path.exists(fname))
with open(fname) as fd:
- return fd.read()
+ return fd.read(), dtb_data
finally:
# Put the test file back
if use_real_dtb:
TestFunctional._MakeInputFile('u-boot.dtb', U_BOOT_DTB_DATA)
+ def _DoReadFile(self, fname, use_real_dtb=False):
+ """Helper function which discards the device-tree binary"""
+ return self._DoReadFileDtb(fname, use_real_dtb)[0]
+
@classmethod
def _MakeInputFile(self, fname, contents):
"""Create a new test input file, creating directories as needed
self.assertEqual(pos, entry.pos)
pos += entry.size
+ def GetFdtLen(self, dtb):
+ """Get the totalsize field from a device tree binary
+
+ Args:
+ dtb: Device tree binary contents
+
+ Returns:
+ Total size of device tree binary, from the header
+ """
+ return struct.unpack('>L', dtb[4:8])[0]
+
def testRun(self):
"""Test a basic run with valid args"""
result = self._RunBinman('-h')
"""Test that a device tree can be added to U-Boot"""
data = self._DoReadFile('26_pack_u_boot_dtb.dts')
self.assertEqual(U_BOOT_NODTB_DATA + U_BOOT_DTB_DATA, data)
+
+ def testPackX86RomNoSize(self):
+ """Test that the end-at-4gb property requires a size property"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('27_pack_4gb_no_size.dts')
+ self.assertIn("Image '/binman': Image size must be provided when "
+ "using end-at-4gb", str(e.exception))
+
+ def testPackX86RomOutside(self):
+ """Test that the end-at-4gb property checks for position boundaries"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('28_pack_4gb_outside.dts')
+ self.assertIn("Node '/binman/u-boot': Position 0x0 (0) is outside "
+ "the image starting at 0xfffffff0 (4294967280)",
+ str(e.exception))
+
+ def testPackX86Rom(self):
+ """Test that a basic x86 ROM can be created"""
+ data = self._DoReadFile('29_x86-rom.dts')
+ self.assertEqual(U_BOOT_DATA + chr(0) * 3 + U_BOOT_SPL_DATA +
+ chr(0) * 6, data)
+
+ def testPackX86RomMeNoDesc(self):
+ """Test that an invalid Intel descriptor entry is detected"""
+ TestFunctional._MakeInputFile('descriptor.bin', '')
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('31_x86-rom-me.dts')
+ self.assertIn("Node '/binman/intel-descriptor': Cannot find FD "
+ "signature", str(e.exception))
+
+ def testPackX86RomBadDesc(self):
+ """Test that the Intel requires a descriptor entry"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('30_x86-rom-me-no-desc.dts')
+ self.assertIn("Node '/binman/intel-me': No position set with "
+ "pos-unset: should another entry provide this correct "
+ "position?", str(e.exception))
+
+ def testPackX86RomMe(self):
+ """Test that an x86 ROM with an ME region can be created"""
+ data = self._DoReadFile('31_x86-rom-me.dts')
+ self.assertEqual(ME_DATA, data[0x1000:0x1000 + len(ME_DATA)])
+
+ def testPackVga(self):
+ """Test that an image with a VGA binary can be created"""
+ data = self._DoReadFile('32_intel-vga.dts')
+ self.assertEqual(VGA_DATA, data[:len(VGA_DATA)])
+
+ def testPackStart16(self):
+ """Test that an image with an x86 start16 region can be created"""
+ data = self._DoReadFile('33_x86-start16.dts')
+ self.assertEqual(X86_START16_DATA, data[:len(X86_START16_DATA)])
+
+ def testPackUbootMicrocode(self):
+ """Test that x86 microcode can be handled correctly
+
+ We expect to see the following in the image, in order:
+ u-boot-nodtb.bin with a microcode pointer inserted at the correct
+ place
+ u-boot.dtb with the microcode removed
+ the microcode
+ """
+ data = self._DoReadFile('34_x86_ucode.dts', True)
+
+ # Now check the device tree has no microcode
+ second = data[len(U_BOOT_NODTB_DATA):]
+ fname = tools.GetOutputFilename('test.dtb')
+ with open(fname, 'wb') as fd:
+ fd.write(second)
+ fdt = fdt_select.FdtScan(fname)
+ ucode = fdt.GetNode('/microcode')
+ self.assertTrue(ucode)
+ for node in ucode.subnodes:
+ self.assertFalse(node.props.get('data'))
+
+ fdt_len = self.GetFdtLen(second)
+ third = second[fdt_len:]
+
+ # Check that the microcode appears immediately after the Fdt
+ # This matches the concatenation of the data properties in
+ # the /microcode/update@xxx nodes in x86_ucode.dts.
+ ucode_data = struct.pack('>4L', 0x12345678, 0x12345679, 0xabcd0000,
+ 0x78235609)
+ self.assertEqual(ucode_data, third[:len(ucode_data)])
+ ucode_pos = len(U_BOOT_NODTB_DATA) + fdt_len
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected position and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ first = data[:len(U_BOOT_NODTB_DATA)]
+ self.assertEqual('nodtb with microcode' + pos_and_size +
+ ' somewhere in here', first)
+
+ def _RunPackUbootSingleMicrocode(self, collate):
+ """Test that x86 microcode can be handled correctly
+
+ We expect to see the following in the image, in order:
+ u-boot-nodtb.bin with a microcode pointer inserted at the correct
+ place
+ u-boot.dtb with the microcode
+ an empty microcode region
+ """
+ # We need the libfdt library to run this test since only that allows
+ # finding the offset of a property. This is required by
+ # Entry_u_boot_dtb_with_ucode.ObtainContents().
+ if not fdt_select.have_libfdt:
+ return
+ data = self._DoReadFile('35_x86_single_ucode.dts', True)
+
+ second = data[len(U_BOOT_NODTB_DATA):]
+
+ fdt_len = self.GetFdtLen(second)
+ third = second[fdt_len:]
+ second = second[:fdt_len]
+
+ if not collate:
+ ucode_data = struct.pack('>2L', 0x12345678, 0x12345679)
+ self.assertIn(ucode_data, second)
+ ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA)
+
+ # Check that the microcode pointer was inserted. It should match the
+ # expected position and size
+ pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos,
+ len(ucode_data))
+ first = data[:len(U_BOOT_NODTB_DATA)]
+ self.assertEqual('nodtb with microcode' + pos_and_size +
+ ' somewhere in here', first)
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ u-boot {
+ pos = <0xfffffff0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ u-boot {
+ pos = <0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ u-boot {
+ pos = <0xfffffff0>;
+ };
+
+ u-boot-spl {
+ pos = <0xfffffff7>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <16>;
+ intel-me {
+ pos-unset;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x800000>;
+ intel-descriptor {
+ };
+
+ intel-me {
+ pos-unset;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ intel-vga {
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ size = <16>;
+
+ x86-start16 {
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ update@1 {
+ data = <0xabcd0000 0x78235609>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ binman {
+ sort-by-pos;
+ end-at-4gb;
+ size = <0x200>;
+ u-boot-with-ucode-ptr {
+ };
+
+ u-boot-dtb-with-ucode {
+ };
+
+ u-boot-ucode {
+ };
+ };
+
+ microcode {
+ update@0 {
+ data = <0x12345678 0x12345679>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Simple program to create a _dt_ucode_base_size symbol which can be read
+ * by 'nm'. This is used by binman tests.
+ *
+ * Build with:
+ * cc -march=i386 -m32 -o u_boot_ucode_ptr -T u_boot_ucode_ptr.lds -nostdlib \
+ u_boot_ucode_ptr.c
+ */
+
+static unsigned long _dt_ucode_base_size[2]
+ __attribute__((section(".ucode"))) = {1, 2};
--- /dev/null
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0xfffffdf0;
+ _start = .;
+ .ucode : {
+ *(.ucode)
+ }
+}
projects / u-boot.git / commitdiff
