mmc: fsl_esdhc: support eMMC HS400 mode

The process for eMMC HS400 mode for eSDHC is,

1. Perform the Tuning Process at the HS400 target operating frequency.
   Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to
   a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
    and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index e7db55d881a5624b9177fb11e569956422ecc599..c53751d0bbb00d5aade575aa20021571acd98afa 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -62,7 +62,12 @@ struct fsl_esdhc {
        uint    hostcapblt2;    /* Host controller capabilities register 2 */
        char    reserved6[8];   /* reserved */
        uint    tbctl;          /* Tuning block control register */
-       char    reserved7[744]; /* reserved */
+       char    reserved7[32];  /* reserved */
+       uint    sdclkctl;       /* SD clock control register */
+       uint    sdtimingctl;    /* SD timing control register */
+       char    reserved8[20];  /* reserved */
+       uint    dllcfg0;        /* DLL config 0 register */
+       char    reserved9[680]; /* reserved */
        uint    esdhcctl;       /* eSDHC control register */
 };
 
@@ -568,16 +573,80 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
        }
 }
 
+static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
+{
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+       u32 time_out;
+
+       esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_FAF);
+
+       time_out = 20;
+       while (esdhc_read32(&regs->esdhcctl) & ESDHCCTL_FAF) {
+               if (time_out == 0) {
+                       printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
+                       break;
+               }
+               time_out--;
+               mdelay(1);
+       }
+}
+
+static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
+                                     bool en)
+{
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+
+       esdhc_clock_control(priv, false);
+       esdhc_flush_async_fifo(priv);
+       if (en)
+               esdhc_setbits32(&regs->tbctl, TBCTL_TB_EN);
+       else
+               esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
+       esdhc_clock_control(priv, true);
+}
+
+static void esdhc_exit_hs400(struct fsl_esdhc_priv *priv)
+{
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+
+       esdhc_clrbits32(&regs->sdtimingctl, FLW_CTL_BG);
+       esdhc_clrbits32(&regs->sdclkctl, CMD_CLK_CTL);
+
+       esdhc_clock_control(priv, false);
+       esdhc_clrbits32(&regs->tbctl, HS400_MODE);
+       esdhc_clock_control(priv, true);
+
+       esdhc_clrbits32(&regs->dllcfg0, DLL_FREQ_SEL | DLL_ENABLE);
+       esdhc_clrbits32(&regs->tbctl, HS400_WNDW_ADJUST);
+
+       esdhc_tuning_block_enable(priv, false);
+}
+
 static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode)
 {
        struct fsl_esdhc *regs = priv->esdhc_regs;
 
+       /* Exit HS400 mode before setting any other mode */
+       if (esdhc_read32(&regs->tbctl) & HS400_MODE &&
+           mode != MMC_HS_400)
+               esdhc_exit_hs400(priv);
+
        esdhc_clock_control(priv, false);
 
        if (mode == MMC_HS_200)
                esdhc_clrsetbits32(&regs->autoc12err, UHSM_MASK,
                                   UHSM_SDR104_HS200);
+       if (mode == MMC_HS_400) {
+               esdhc_setbits32(&regs->tbctl, HS400_MODE);
+               esdhc_setbits32(&regs->sdclkctl, CMD_CLK_CTL);
+               esdhc_clock_control(priv, true);
 
+               esdhc_setbits32(&regs->dllcfg0, DLL_ENABLE | DLL_FREQ_SEL);
+               esdhc_setbits32(&regs->tbctl, HS400_WNDW_ADJUST);
+
+               esdhc_clock_control(priv, false);
+               esdhc_flush_async_fifo(priv);
+       }
        esdhc_clock_control(priv, true);
 }
 
@@ -592,6 +661,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
                esdhc_clock_control(priv, true);
        }
 
+       if (mmc->selected_mode == MMC_HS_400)
+               esdhc_tuning_block_enable(priv, true);
+
        /* Set the clock speed */
        if (priv->clock != mmc->clock)
                set_sysctl(priv, mmc, mmc->clock);
@@ -948,38 +1020,6 @@ static int fsl_esdhc_reinit(struct udevice *dev)
 }
 
 #ifdef MMC_SUPPORTS_TUNING
-static void esdhc_flush_async_fifo(struct fsl_esdhc_priv *priv)
-{
-       struct fsl_esdhc *regs = priv->esdhc_regs;
-       u32 time_out;
-
-       esdhc_setbits32(&regs->esdhcctl, ESDHCCTL_FAF);
-
-       time_out = 20;
-       while (esdhc_read32(&regs->esdhcctl) & ESDHCCTL_FAF) {
-               if (time_out == 0) {
-                       printf("fsl_esdhc: Flush asynchronous FIFO timeout.\n");
-                       break;
-               }
-               time_out--;
-               mdelay(1);
-       }
-}
-
-static void esdhc_tuning_block_enable(struct fsl_esdhc_priv *priv,
-                                     bool en)
-{
-       struct fsl_esdhc *regs = priv->esdhc_regs;
-
-       esdhc_clock_control(priv, false);
-       esdhc_flush_async_fifo(priv);
-       if (en)
-               esdhc_setbits32(&regs->tbctl, TBCTL_TB_EN);
-       else
-               esdhc_clrbits32(&regs->tbctl, TBCTL_TB_EN);
-       esdhc_clock_control(priv, true);
-}
-
 static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 {
        struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
@@ -1007,8 +1047,11 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 
        esdhc_write32(&regs->irqstaten, irqstaten);
 
-       if (i != MAX_TUNING_LOOP)
+       if (i != MAX_TUNING_LOOP) {
+               if (plat->mmc.hs400_tuning)
+                       esdhc_setbits32(&regs->sdtimingctl, FLW_CTL_BG);
                return 0;
+       }
 
        printf("fsl_esdhc: tuning failed!\n");
        esdhc_clrbits32(&regs->autoc12err, SMPCLKSEL);
@@ -1018,6 +1061,14 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 }
 #endif
 
+int fsl_esdhc_hs400_prepare_ddr(struct udevice *dev)
+{
+       struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+       esdhc_tuning_block_enable(priv, false);
+       return 0;
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
        .get_cd         = fsl_esdhc_get_cd,
        .send_cmd       = fsl_esdhc_send_cmd,
@@ -1026,6 +1077,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
        .execute_tuning = fsl_esdhc_execute_tuning,
 #endif
        .reinit = fsl_esdhc_reinit,
+       .hs400_prepare_ddr = fsl_esdhc_hs400_prepare_ddr,
 };
 
 static const struct udevice_id fsl_esdhc_ids[] = {

diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 0a426e1471245c30faa3440ed99afb1e34fe0f92..cc119668d6a380ca0a41ef68d303c5ec7ed4a230 100644 (file)
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -172,6 +172,18 @@
 
 /* Tuning block control register */
 #define TBCTL_TB_EN            0x00000004
+#define HS400_MODE             0x00000010
+#define HS400_WNDW_ADJUST      0x00000040
+
+/* SD clock control register */
+#define CMD_CLK_CTL            0x00008000
+
+/* SD timing control register */
+#define FLW_CTL_BG             0x00008000
+
+/* DLL config 0 register */
+#define DLL_ENABLE             0x80000000
+#define DLL_FREQ_SEL           0x08000000
 
 #define MAX_TUNING_LOOP                40