/*------------------------------------------------------------------------------*/
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_NAND_SPL)
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
bx lr
+#ifndef CONFIG_SPL_BUILD
+
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
LIB = $(obj)lib$(BOARD).o
+ifdef CONFIG_SPL_BUILD
+SOBJS := lowlevel_init.o
+endif
COBJS := mx31pdk.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+++ /dev/null
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x87ec0000
-else
-CONFIG_SYS_TEXT_BASE = 0x87f00000
-endif
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong bootflag)
+{
+ relocate_code(0, NULL, CONFIG_SPL_TEXT_BASE);
+ asm volatile("ldr pc, =nand_boot");
+}
+#endif
+
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
LIB = $(obj)lib$(BOARD).o
-COBJS := tx25.o
+ifdef CONFIG_SPL_BUILD
SOBJS := lowlevel_init.o
+endif
+COBJS := tx25.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
+++ /dev/null
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x810c0000
-else
-CONFIG_SYS_TEXT_BASE = 0x81200000
-endif
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong bootflag)
+{
+ relocate_code(0, NULL, CONFIG_SPL_TEXT_BASE);
+ asm volatile("ldr pc, =nand_boot");
+}
+#endif
+
#ifdef CONFIG_FEC_MXC
#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7)
#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9)
imx31_phycore_eet arm arm1136 imx31_phycore - mx31 imx31_phycore:IMX31_PHYCORE_EET
qong arm arm1136 - davedenx mx31
mx31ads arm arm1136 - freescale mx31
-mx31pdk arm arm1136 - freescale mx31 mx31pdk:NAND_U_BOOT
+mx31pdk arm arm1136 - freescale mx31
tt01 arm arm1136 - hale mx31
imx31_litekit arm arm1136 - logicpd mx31
flea3 arm arm1136 - CarMediaLab mx35
-----------------------------------------------------------------------------
-For boards which boot from nand_spl, it is possible to save one copy
+For boards which boot from spl, it is possible to save one copy
if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
is copied again in relocate_code().
-example for the tx25 board:
+example for the tx25 board booting from NAND Flash:
a) cpu starts
b) it copies the first page in nand to internal ram
- (nand_spl_code)
+ (spl code)
c) end executes this code
d) this initialize CPU, RAM, ... and copy itself to RAM
(this bin must fit in one page, so board_init_f()
-----------------------------------------------------------------------------
-Relocation with NAND_SPL (example for the tx25):
+Relocation with SPL (example for the tx25 booting from NAND Flash):
- cpu copies the first page from NAND to 0xbb000000 (IMX_NFC_BASE)
and start with code execution on this address.
-- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
- which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
+- The First page contains u-boot code from drivers/mtd/nand/mxc_nand_spl.c
+ which inits the dram, cpu registers, reloacte itself to CONFIG_SPL_TEXT_BASE and loads
the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
@CONFIG_SYS_NAND_U_BOOT_START
- This u-boot does no RAM init, nor CPU register setup. Just look
where it has to copy and relocate itself to this address. If
relocate address = CONFIG_SYS_TEXT_BASE (not the same, as the
- CONFIG_SYS_TEXT_BASE from the nand_spl code), then there is no need
+ CONFIG_SPL_TEXT_BASE from the spl code), then there is no need
to copy, just go on with bss clear and jump to board_init_r.
-----------------------------------------------------------------------------
else # minimal SPL drivers
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
endif # drivers
endif # nand
defined(CONFIG_MX51) || defined(CONFIG_MX53)
#include <asm/arch/imx-regs.h>
#endif
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
#define DRIVER_NAME "mxc_nand"
struct mtd_info mtd;
struct nand_chip *nand;
- struct fsl_nfc_regs __iomem *regs;
+ struct mxc_nand_regs __iomem *regs;
#ifdef MXC_NFC_V3_2
- struct fsl_nfc_ip_regs __iomem *ip_regs;
+ struct mxc_nand_ip_regs __iomem *ip_regs;
#endif
int spare_only;
int status_request;
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+ host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
#ifdef MXC_NFC_V3_2
host->ip_regs =
- (struct fsl_nfc_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+ (struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
#endif
host->clk_act = 1;
* MA 02111-1307 USA
*/
-#ifndef __FSL_NFC_H
-#define __FSL_NFC_H
+#ifndef __MXC_NAND_H
+#define __MXC_NAND_H
/*
* Register map and bit definitions for the Freescale NAND Flash Controller
#define NAND_MXC_REG_OFFSET 0x1e00
#endif
-struct fsl_nfc_regs {
+struct mxc_nand_regs {
u8 main_area[NAND_MXC_NR_BUFS][0x200];
u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
/*
};
#ifdef MXC_NFC_V3_2
-struct fsl_nfc_ip_regs {
+struct mxc_nand_ip_regs {
u32 wrprot;
u32 wrprot_unlock_blkaddr[8];
u32 config2;
#define writenfc writel
#endif
-#endif /* __FSL_NFC_H */
+#endif /* __MXC_NAND_H */
#include <nand.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR;
#elif defined(MXC_NFC_V3_2)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
-static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
#endif
static void nfc_wait_ready(void)
tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
- NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+ NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) |
NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
NFC_V3_CONFIG2_ONE_CYCLE;
if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
* if spare size is larger that 16 bytes per 512 byte hunk
* then use 8 symbol correction instead of 4
*/
- if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+ if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
else
tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
int config1;
- writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+ writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size);
/* unlocking RAM Buff */
writenfc(0x2, &nfc->config);
* if spare size is larger that 16 bytes per 512 byte hunk
* then use 8 symbol correction instead of 4
*/
- if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+ if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
else
config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
u32 ecc_status = readl(&nfc->ecc_status_result);
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
- int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
+ int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4;
int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512;
do {
return 0;
}
-#if defined(CONFIG_ARM)
-void board_init_f (ulong bootflag)
-{
- relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
- CONFIG_SYS_TEXT_BASE);
-}
-#endif
-
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x87dc0000
+#define CONFIG_SYS_TEXT_BASE 0x87e00000
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x81000000 uImage-mx31; bootm\0" \
- "prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; " \
+ "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \
"nand erase 0x0 0x40000; " \
"nand write 0x81000000 0x0 0x40000\0"
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
+ CONFIG_SYS_INIT_RAM_SIZE)
/*-----------------------------------------------------------------------
* FLASH and environment organization
/* NAND configuration for the NAND_SPL */
/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
-#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
/* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/imx-regs.h>
/*
* KARO TX25 board - SoC Configuration
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
-/* NAND BOOT is the only boot method */
-#define CONFIG_NAND_U_BOOT
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x810c0000
+#define CONFIG_SYS_TEXT_BASE 0x81200000
#ifndef MACH_TYPE_TX25
#define MACH_TYPE_TX25 2177
#define CONFIG_MACH_TYPE MACH_TYPE_TX25
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
/* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
-#define CONFIG_SYS_NAND_U_BOOT_DST (0x81200000)
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_SPARE_SIZE 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024)
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE)
#endif /* __CONFIG_H */
+++ /dev/null
-CONFIG_NAND_SPL = y
-PAD_TO := 2048
-
-include $(TOPDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
- $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS = start.o crt0.o lowlevel_init.o
-COBJS = nand_boot_fsl_nfc.o
-
-SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS += $(SRCTREE)/arch/arm/cpu/arm1136/start.S
-SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS += $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $@
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
- -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm1136/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/board/freescale/mx31pdk/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/nand_spl/%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- start.o (.text)
- lowlevel_init.o (.text)
- nand_boot_fsl_nfc.o (.text)
- *(.text)
- . = 2K;
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : {
- *(.data)
- }
-
- . = ALIGN(4);
-
- . = ALIGN(4);
- .u_boot_list : {
- *(SORT(.u_boot_list*));
- }
-
- . = ALIGN(4);
-
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
- }
-
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
- _end = .;
-
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
- . = ALIGN(4);
- __bss_end = .;
- }
-
- /DISCARD/ : { *(.bss*) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
-}
+++ /dev/null
-#
-# (C) Copyright 2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_NAND_SPL = y
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-nandobj := $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
- $(LDFLAGS_FINAL)
-AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS = start.o crt0.o lowlevel_init.o
-COBJS = nand_boot_fsl_nfc.o
-
-SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS += $(SRCTREE)/arch/arm/cpu/arm926ejs/start.S
-SRCS += $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS += $(SRCTREE)/board/karo/tx25/lowlevel_init.S
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(nandobj)board/$(BOARDDIR)
-
-ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all: $(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
- -Map $(nandobj)u-boot-spl.map \
- -o $@
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
- -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm926ejs/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/board/karo/tx25/%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(SRCTREE)/nand_spl/%.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-PAD_TO := 2048
+++ /dev/null
-/*
- * (C) Copyright 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- start.o (.text)
- lowlevel_init.o (.text)
- nand_boot_fsl_nfc.o (.text)
- *(.text)
- . = 2K;
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : {
- *(.data)
- }
-
- . = ALIGN(4);
-
- . = ALIGN(4);
- .u_boot_list : {
- *(SORT(.u_boot_list*));
- }
-
- . = ALIGN(4);
-
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
- }
-
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
- _end = .;
-
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
- . = ALIGN(4);
- __bss_end = .;
- }
-
- /DISCARD/ : { *(.bss*) }
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynsym*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.hash*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
-}
projects / u-boot.git / commitdiff
