ARM: dts: rockchip: update rk3188-radxarock.dts

In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
index 204bb3a90eed0dd0547ed76867a59b68bbe5948f..9c9016de1bc60dc7208799f31c4fd0e581e12037 100644 (file)
--- a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
+++ b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi
@@ -5,36 +5,58 @@
 
 #include "rk3188-u-boot.dtsi"
 
+/ {
+       chosen {
+/*             stdout-path = &uart2; */
+               stdout-path = "serial2:115200n8";
+       };
+
+       config {
+               u-boot,boot-led = "rock:red:power";
+               u-boot,dm-pre-reloc;
+       };
+};
+
 &cru {
        u-boot,dm-spl;
 };
 
-&pinctrl {
-       u-boot,dm-spl;
+&dmc {
+       rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+               0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+               0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+               0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+               0x4 0x0>;
+       rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+               0x220 0x40 0x0 0x0>;
+       rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
 };
 
-&mmc0 {
+&emmc {
        fifo-mode;
        max-frequency = <16000000>;
 };
 
-&mmc1 {
+&mmc0 {
        fifo-mode;
        max-frequency = <16000000>;
 };
 
-&emmc {
+&mmc1 {
        fifo-mode;
        max-frequency = <16000000>;
 };
 
-&uart2 {
-       status = "okay";
+&pinctrl {
        u-boot,dm-spl;
 };
 
 &timer3 {
        compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
-       u-boot,dm-spl;
        clock-frequency = <24000000>;
+       u-boot,dm-spl;
+};
+
+&uart2 {
+       u-boot,dm-spl;
 };

diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index 10527a052d8c65b5657d5c829bcfd9f96949f147..e7138a4ae0bca8450d440f043d4a7541da110f83 100644 (file)
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  */
@@ -16,17 +16,7 @@
                mmc0 = &mmc0;
        };
 
-       chosen {
-/*             stdout-path = &uart2; */
-               stdout-path = "serial2:115200n8";
-       };
-
-       config {
-               u-boot,dm-pre-reloc;
-               u-boot,boot-led = "rock:red:power";
-       };
-
-       memory {
+       memory@60000000 {
                device_type = "memory";
                reg = <0x60000000 0x80000000>;
        };
@@ -36,7 +26,7 @@
                autorepeat;
 
                power {
-                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_POWER>;
                        label = "GPIO Key Power";
                        linux,input-type = <1>;
@@ -48,21 +38,21 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               green {
+               green_led: led-0 {
                        label = "rock:green:user1";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
-               blue {
+               blue_led: led-1 {
                        label = "rock:blue:user2";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
-               sleep {
+               sleep_led: led-2 {
                        label = "rock:red:power";
-                       gpios = <&gpio0 15 0>;
+                       gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
        };
@@ -84,7 +74,7 @@
 
        ir_recv: gpio-ir-receiver {
                compatible = "gpio-ir-receiver";
-               gpios = <&gpio0 10 1>;
+               gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&ir_recv_pin>;
        };
@@ -92,7 +82,7 @@
        vcc_otg: usb-otg-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&otg_vbus_drv>;
                regulator-name = "otg-vbus";
@@ -107,7 +97,7 @@
                regulator-name = "sdmmc-supply";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
-               gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+               gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&sdmmc_pwr>;
                startup-delay-us = <100000>;
@@ -117,7 +107,7 @@
        vcc_host: usb-host-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&host_vbus_drv>;
                regulator-name = "host-pwr";
@@ -136,17 +126,6 @@
        };
 };
 
-&dmc {
-       rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
-               0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
-               0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
-               0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
-               0x4 0x0>;
-       rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
-               0x220 0x40 0x0 0x0>;
-       rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
-};
-
 &emac {
        status = "okay";
 
@@ -159,12 +138,28 @@
        phy0: ethernet-phy@0 {
                reg = <0>;
                interrupt-parent = <&gpio3>;
-               interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+               interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
        };
 };
 
 &cpu0 {
-       cpu0-supply = <&vdd_arm>;
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+       status = "okay";
 };
 
 &i2c1 {
@@ -175,7 +170,7 @@
                compatible = "haoyu,hym8563";
                reg = <0x51>;
                interrupt-parent = <&gpio0>;
-               interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
                pinctrl-names = "default";
                pinctrl-0 = <&rtc_int>;
                #clock-cells = <0>;
@@ -287,7 +282,6 @@
 };
 
 &mmc0 {
-       num-slots = <1>;
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -318,40 +312,40 @@
 
        act8846 {
                act8846_dvs0_ctl: act8846-dvs0-ctl {
-                       rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+                       rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
                };
        };
 
        hym8563 {
                rtc_int: rtc-int {
-                       rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+                       rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
                };
        };
 
        lan8720a  {
                phy_int: phy-int {
-                       rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+                       rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
                };
        };
 
        ir-receiver {
                ir_recv_pin: ir-recv-pin {
-                       rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+                       rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
 
        sd0 {
                sdmmc_pwr: sdmmc-pwr {
-                       rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+                       rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
 
        usb {
                host_vbus_drv: host-vbus-drv {
-                       rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+                       rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
                };
                otg_vbus_drv: otg-vbus-drv {
-                       rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+                       rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
 };
@@ -368,6 +362,10 @@
        status = "okay";
 };
 
+&uart2 {
+       status = "okay";
+};
+
 &uart3 {
        status = "okay";
 };