ARM: bcm283x: change the virtual address of the XHCI PCI device base

Move the XHCI PCI device base up in the virtual address space. This fixes
initialization failure observed with newer Raspberry Pi firmware, later
than 63b1922311 ("firmware: arm_loader: Update armstubs with those from
PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base
conflicts with the updated ARM/VideoCore firmware.

This also requires to reduce the size of the mapped PCI device region
from 8MiB to 4MiB to fit into 32bit address space. This is still enough
for the XHCI PCI device.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index 49027ce0a2e62bd7eda918751ecf150715ea83f0..980349998527e46551b14ee3667aa5fa4793ffc8 100644 (file)
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -14,7 +14,7 @@
 #include <asm/global_data.h>
 
 #define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS       0x600000000UL
-#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE       0x800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE       0x400000UL
 
 #ifdef CONFIG_ARM64
 #include <asm/armv8/mmu.h>
@@ -148,7 +148,7 @@ int mach_cpu_init(void)
 
 #ifdef CONFIG_ARMV7_LPAE
 #ifdef CONFIG_TARGET_RPI_4_32B
-#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT       0xff800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT       0xffc00000UL
 #include <addr_map.h>
 #include <asm/system.h>