can be displayed via the splashscreen support or the
bmp command.
-- Compression support:
- CONFIG_GZIP
-
- Enabled by default to support gzip compressed images.
-
- CONFIG_BZIP2
-
- If this option is set, support for bzip2 compressed
- images is included. If not, only uncompressed and gzip
- compressed images are supported.
-
- NOTE: the bzip2 algorithm requires a lot of RAM, so
- the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should
- be at least 4MB.
-
- MII/PHY support:
CONFIG_PHY_CLOCK_FREQ (ppc4xx)
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11B=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_SPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
+# CONFIG_GZIP is not set
CONFIG_TPL_USE_TINY_PRINTF=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_CONSOLE_SCROLL_LINES=5
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
+# CONFIG_GZIP is not set
CONFIG_CONSOLE_SCROLL_LINES=5
CONFIG_CMD_DHRYSTONE=y
CONFIG_TPM=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
CONFIG_TPM=y
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
CONFIG_TPM=y
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
CONFIG_TPM=y
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_SOUND=y
CONFIG_SOUND_I8254=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_SOUND=y
CONFIG_SOUND_I8254=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
# CONFIG_VIDEO_VESA is not set
+# CONFIG_GZIP is not set
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
CONFIG_IMX_WATCHDOG=y
+CONFIG_BZIP2=y
# CONFIG_DM_ETH is not set
CONFIG_DEBUG_EFI_CONSOLE=y
# CONFIG_REGEX is not set
+# CONFIG_GZIP is not set
CONFIG_EFI=y
# CONFIG_EFI_LOADER is not set
CONFIG_REGMAP=y
CONFIG_SYSCON=y
# CONFIG_PCI_PNP is not set
+# CONFIG_GZIP is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
# CONFIG_PCI_PNP is not set
+# CONFIG_GZIP is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_STUB_64BIT=y
CONFIG_SPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
+# CONFIG_GZIP is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+CONFIG_BZIP2=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+CONFIG_BZIP2=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+CONFIG_BZIP2=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11B=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+CONFIG_BZIP2=y
CONFIG_OF_LIBFDT=y
CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
CONFIG_FRAMEBUFFER_VESA_MODE=0x144
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
CONFIG_FRAMEBUFFER_VESA_MODE=0x144
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+CONFIG_BZIP2=y
CONFIG_SYSCON=y
# CONFIG_PCI_PNP is not set
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5
+# CONFIG_GZIP is not set
CONFIG_PMECC_CAP=4
CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
CONFIG_LZMA=y
+CONFIG_LZO=y
CONFIG_OF_LIBFDT=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_WDT=y
CONFIG_WDT_ORION=y
+CONFIG_LZO=y
# CONFIG_DM_DEVICE_REMOVE is not set
# CONFIG_MMC is not set
CONFIG_ARM_DCC=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
CONFIG_FAT_WRITE=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
CONFIG_FAT_WRITE=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
# CONFIG_MMC is not set
CONFIG_ARM_DCC=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ARM_DCC=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_NAND_MAX_CHIPS=2
CONFIG_ARM_DCC=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_NAND_ARASAN=y
CONFIG_ARM_DCC=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_SPI=y
CONFIG_ZYNQMP_GQSPI=y
CONFIG_PANIC_HANG=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_ZYNQ=y
CONFIG_ARM_DCC=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_ARM_DCC=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
CONFIG_DEBUG_UART_ARM_DCC=y
CONFIG_ARM_DCC=y
CONFIG_ZYNQ_QSPI=y
+# CONFIG_GZIP is not set
# CONFIG_EFI_LOADER is not set
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
-#define CONFIG_BZIP2
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/*
* Standard filesystems
*/
-#define CONFIG_BZIP2
/*
* mv-plug-common.h should be defined after CMD configs since it used them
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-/*
- * Compression configuration
- */
-#define CONFIG_BZIP2
-
/*
* Commands configuration
*/
*/
#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT
-/*
- * Compression configuration
- */
-#define CONFIG_BZIP2
-
/*
* Commands configuration
*/
#define CONFIG_KW88F6702 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-/* compression configuration */
-#define CONFIG_BZIP2
-
/* commands configuration */
/*
/*
* Standard filesystems
*/
-#define CONFIG_BZIP2
/*
* mv-plug-common.h should be defined after CMD configs since it used them
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
#define CONFIG_RBTREE
-#define CONFIG_LZO
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
-#define CONFIG_LZO
#define CONFIG_CMD_MTDPARTS
#define CONFIG_SYS_MALLOC_LEN (4 << 20)
#define CONFIG_LMB
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
/* SATA AHCI storage */
/* Undef unneeded configs */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
#undef CONFIG_CMD_ENV
/* BOOTP options */
#undef CONFIG_BOOTCOMMAND
#undef CONFIG_EXTRA_ENV_SETTINGS
#undef CONFIG_SYS_MALLOC_LEN
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
#undef CONFIG_CMD_ENV
#undef CONFIG_SYS_INIT_SP_ADDR
/* Undef unneeded configs */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
#undef CONFIG_SYS_CBSIZE