]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
clk: stm32f7: retrieve PWR base address from DT
authorPatrice Chotard <patrice.chotard@st.com>
Wed, 15 Nov 2017 12:14:44 +0000 (13:14 +0100)
committerTom Rini <trini@konsulko.com>
Thu, 30 Nov 2017 03:30:50 +0000 (22:30 -0500)
PWR IP is used to enable over-drive feature in
order to reach a higher frequency.
Get its base address from DT instead of hard-coded value

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
arch/arm/include/asm/arch-stm32f4/stm32_pwr.h [new file with mode: 0644]
arch/arm/include/asm/arch-stm32f7/stm32.h
arch/arm/include/asm/arch-stm32f7/stm32_pwr.h [new file with mode: 0644]
drivers/clk/clk_stm32f7.c

diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h b/arch/arm/include/asm/arch-stm32f4/stm32_pwr.h
new file mode 100644 (file)
index 0000000..bfe5469
--- /dev/null
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __STM32_PWR_H_
+
+/*
+ * Offsets of some PWR registers
+ */
+#define PWR_CR1_ODEN                   BIT(16)
+#define PWR_CR1_ODSWEN                 BIT(17)
+#define PWR_CSR1_ODRDY                 BIT(16)
+#define PWR_CSR1_ODSWRDY               BIT(17)
+
+struct stm32_pwr_regs {
+       u32 cr1;   /* power control register 1 */
+       u32 csr1;  /* power control/status register 2 */
+};
+
+#endif /* __STM32_PWR_H_ */
index d6412a00cc6274639856135c6eb24b90f2102dfe..0117039cf2c8f4486f84839367d99bd0539f205d 100644 (file)
@@ -95,13 +95,6 @@ struct stm32_rcc_regs {
 };
 #define STM32_RCC              ((struct stm32_rcc_regs *)RCC_BASE)
 
-struct stm32_pwr_regs {
-       u32 cr1;   /* power control register 1 */
-       u32 csr1;  /* power control/status register 2 */
-       u32 cr2;   /* power control register 2 */
-       u32 csr2;  /* power control/status register 2 */
-};
-#define STM32_PWR              ((struct stm32_pwr_regs *)PWR_BASE)
 
 void stm32_flash_latency_cfg(int latency);
 
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h b/arch/arm/include/asm/arch-stm32f7/stm32_pwr.h
new file mode 100644 (file)
index 0000000..917dd46
--- /dev/null
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __STM32_PWR_H_
+
+/*
+ * Offsets of some PWR registers
+ */
+#define PWR_CR1_ODEN                   BIT(16)
+#define PWR_CR1_ODSWEN                 BIT(17)
+#define PWR_CSR1_ODRDY                 BIT(16)
+#define PWR_CSR1_ODSWRDY               BIT(17)
+
+struct stm32_pwr_regs {
+       u32 cr1;   /* power control register 1 */
+       u32 csr1;  /* power control/status register 2 */
+       u32 cr2;   /* power control register 2 */
+       u32 csr2;  /* power control/status register 2 */
+};
+
+#endif /* __STM32_PWR_H_ */
index f1a9e9ca44ee4341c3926e00b17cbafdd5ef5eb3..0fa838c4ee51a67fdaa2793607bbf7bcc46c1583 100644 (file)
@@ -8,10 +8,12 @@
 #include <common.h>
 #include <clk-uclass.h>
 #include <dm.h>
+
 #include <asm/io.h>
 #include <asm/arch/rcc.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_pwr.h>
 
 #include <dt-bindings/mfd/stm32f7-rcc.h>
 
 #define RCC_CFGR_PPRE1_SHIFT           10
 #define RCC_CFGR_PPRE2_SHIFT           13
 
-/*
- * Offsets of some PWR registers
- */
-#define PWR_CR1_ODEN                   BIT(16)
-#define PWR_CR1_ODSWEN                 BIT(17)
-#define PWR_CSR1_ODRDY                 BIT(16)
-#define PWR_CSR1_ODSWRDY               BIT(17)
 
 struct pll_psc {
        u8      pll_m;
@@ -88,6 +83,7 @@ struct pll_psc {
 
 struct stm32_clk {
        struct stm32_rcc_regs *base;
+       struct stm32_pwr_regs *pwr_regs;
 };
 
 #if !defined(CONFIG_STM32_HSE_HZ)
@@ -115,6 +111,7 @@ static int configure_clocks(struct udevice *dev)
 {
        struct stm32_clk *priv = dev_get_priv(dev);
        struct stm32_rcc_regs *regs = priv->base;
+       struct stm32_pwr_regs *pwr = priv->pwr_regs;
 
        /* Reset RCC configuration */
        setbits_le32(&regs->cr, RCC_CR_HSION);
@@ -153,14 +150,14 @@ static int configure_clocks(struct udevice *dev)
 
        /* Enable high performance mode, System frequency up to 200 MHz */
        setbits_le32(&regs->apb1enr, RCC_APB1ENR_PWREN);
-       setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN);
+       setbits_le32(&pwr->cr1, PWR_CR1_ODEN);
        /* Infinite wait! */
-       while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY))
+       while (!(readl(&pwr->csr1) & PWR_CSR1_ODRDY))
                ;
        /* Enable the Over-drive switch */
-       setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODSWEN);
+       setbits_le32(&pwr->cr1, PWR_CR1_ODSWEN);
        /* Infinite wait! */
-       while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODSWRDY))
+       while (!(readl(&pwr->csr1) & PWR_CSR1_ODSWRDY))
                ;
 
        stm32_flash_latency_cfg(5);
@@ -268,6 +265,9 @@ void clock_setup(int peripheral)
 
 static int stm32_clk_probe(struct udevice *dev)
 {
+       struct ofnode_phandle_args args;
+       int err;
+
        debug("%s: stm32_clk_probe\n", __func__);
 
        struct stm32_clk *priv = dev_get_priv(dev);
@@ -279,6 +279,16 @@ static int stm32_clk_probe(struct udevice *dev)
 
        priv->base = (struct stm32_rcc_regs *)addr;
 
+       err = dev_read_phandle_with_args(dev, "st,syscfg", NULL, 0, 0,
+                                        &args);
+       if (err) {
+               debug("%s: can't find syscon device (%d)\n", __func__,
+                     err);
+               return err;
+       }
+
+       priv->pwr_regs = (struct stm32_pwr_regs *)ofnode_get_addr(args.node);
+
        configure_clocks(dev);
 
        return 0;