sunxi: F1C100s: update DT files from Linux

The initial U-Boot F1C100s port was based on the mainline kernel DT
files, which were quite basic and were missing the essential MMC and
SPI peripherals. While we could work around this in the SPL by
hardcoding the required information, this left U-Boot proper without SD
card or SPI flash support, so actual loading would require FEL boot.

Now the missing DT bits have been submitted and accepted in the kernel
tree, so lets sync back those files into U-Boot to enable MMC and
SPI, plus benefit from some fixes.

This is a verbatim copy of the .dts and .dtsi file from
linux-sunxi/dt-for-5.19[1], which have been part of linux-next for a
while as well.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/log/?h=sunxi/dt-for-5.19

Link: https://lore.kernel.org/linux-arm-kernel/20220317162349.739636-1-andre.przywara@arm.com/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
index a1154e6c7cb5d2a798e97823f84e478e13fe067b..04e59b8381cb8b340d853ba019db8ae917df4732 100644 (file)
--- a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
@@ -11,12 +11,43 @@
        compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
 
        aliases {
+               mmc0 = &mmc0;
                serial0 = &uart0;
+               spi0 = &spi0;
        };
 
        chosen {
                stdout-path = "serial0:115200n8";
        };
+
+       reg_vcc3v3: vcc3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+};
+
+&mmc0 {
+       broken-cd;
+       bus-width = <4>;
+       disable-wp;
+       status = "okay";
+       vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi0_pc_pins>;
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "winbond,w25q128", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+       };
 };
 
 &uart0 {

diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi
index 6100d3b75f613ba6fcd874ea83253d9e77cf69fd..0edc1724407b38f01d6b3f20b15472cf90179093 100644 (file)
--- a/arch/arm/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
        #address-cells = <1>;
        #size-cells = <1>;
@@ -26,9 +29,13 @@
        };
 
        cpus {
-               cpu {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
                        compatible = "arm,arm926ej-s";
                        device_type = "cpu";
+                       reg = <0x0>;
                };
        };
 
@@ -62,6 +69,70 @@
                        };
                };
 
+               spi0: spi@1c05000 {
+                       compatible = "allwinner,suniv-f1c100s-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x01c05000 0x1000>;
+                       interrupts = <10>;
+                       clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI0>;
+                       status = "disabled";
+                       num-cs = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi1: spi@1c06000 {
+                       compatible = "allwinner,suniv-f1c100s-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x01c06000 0x1000>;
+                       interrupts = <11>;
+                       clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI1>;
+                       status = "disabled";
+                       num-cs = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc0: mmc@1c0f000 {
+                       compatible = "allwinner,suniv-f1c100s-mmc",
+                                    "allwinner,sun7i-a20-mmc";
+                       reg = <0x01c0f000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC0>,
+                                <&ccu CLK_MMC0>,
+                                <&ccu CLK_MMC0_OUTPUT>,
+                                <&ccu CLK_MMC0_SAMPLE>;
+                       clock-names = "ahb", "mmc", "output", "sample";
+                       resets = <&ccu RST_BUS_MMC0>;
+                       reset-names = "ahb";
+                       interrupts = <23>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@1c10000 {
+                       compatible = "allwinner,suniv-f1c100s-mmc",
+                                    "allwinner,sun7i-a20-mmc";
+                       reg = <0x01c10000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC1>,
+                                <&ccu CLK_MMC1>,
+                                <&ccu CLK_MMC1_OUTPUT>,
+                                <&ccu CLK_MMC1_SAMPLE>;
+                       clock-names = "ahb", "mmc", "output", "sample";
+                       resets = <&ccu RST_BUS_MMC1>;
+                       reset-names = "ahb";
+                       interrupts = <24>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
                ccu: clock@1c20000 {
                        compatible = "allwinner,suniv-f1c100s-ccu";
                        reg = <0x01c20000 0x400>;
@@ -82,13 +153,24 @@
                        compatible = "allwinner,suniv-f1c100s-pinctrl";
                        reg = <0x01c20800 0x400>;
                        interrupts = <38>, <39>, <40>;
-                       clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+                       clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
                        clock-names = "apb", "hosc", "losc";
                        gpio-controller;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        #gpio-cells = <3>;
 
+                       mmc0_pins: mmc0-pins {
+                               pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+                               function = "mmc0";
+                               drive-strength = <30>;
+                       };
+
+                       spi0_pc_pins: spi0-pc-pins {
+                               pins = "PC0", "PC1", "PC2", "PC3";
+                               function = "spi0";
+                       };
+
                        uart0_pe_pins: uart0-pe-pins {
                                pins = "PE0", "PE1";
                                function = "uart0";
@@ -98,14 +180,16 @@
                timer@1c20c00 {
                        compatible = "allwinner,suniv-f1c100s-timer";
                        reg = <0x01c20c00 0x90>;
-                       interrupts = <13>;
+                       interrupts = <13>, <14>, <15>;
                        clocks = <&osc24M>;
                };
 
                wdt: watchdog@1c20ca0 {
                        compatible = "allwinner,suniv-f1c100s-wdt",
-                                    "allwinner,sun4i-a10-wdt";
+                                    "allwinner,sun6i-a31-wdt";
                        reg = <0x01c20ca0 0x20>;
+                       interrupts = <16>;
+                       clocks = <&osc32k>;
                };
 
                uart0: serial@1c25000 {
@@ -114,8 +198,8 @@
                        interrupts = <1>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 38>;
-                       resets = <&ccu 24>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
                        status = "disabled";
                };
 
@@ -125,8 +209,8 @@
                        interrupts = <2>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 39>;
-                       resets = <&ccu 25>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
                        status = "disabled";
                };
 
@@ -136,8 +220,8 @@
                        interrupts = <3>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 40>;
-                       resets = <&ccu 26>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
                        status = "disabled";
                };
        };