CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD_PARTITIONS=y
CONFIG_NAND=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
# CONFIG_NET is not set
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_CONS_INDEX=3
CONFIG_SYS_NS16550=y
CONFIG_LED_STATUS_GREEN_ENABLE=y
CONFIG_LED_STATUS_GREEN=2
CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_SYS_OMAP24_I2C_SPEED=400000
+CONFIG_TWL4030_INPUT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_CONS_INDEX=3
CONFIG_SYS_NS16550=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_LED_STATUS_BIT2=4
CONFIG_LED_STATUS_STATE2=2
CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_LED_STATUS_BIT2=4
CONFIG_LED_STATUS_STATE2=2
CONFIG_LED_STATUS_CMD=y
+CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPL_NAND_SIMPLE=y
driver handles English and German keyboards - set the environment
variable 'keymap' to "de" to select German. Keyboard repeat is
handled by the keyboard itself.
+
+config TWL4030_INPUT
+ bool "Enable TWL4030 Input controller"
+ help
+ Enable TWL4030 Input controller
can make requests to the BPMP. This driver is similar to an MFD
driver in the Linux kernel.
+config TWL4030_LED
+ bool "Enable TWL4030 LED controller"
+ help
+ Enable this to add support for the TWL4030 LED controller.
+
config WINBOND_W83627
bool "Enable Winbond Super I/O driver"
help
/*
* TWL4030
*/
-#define CONFIG_TWL4030_LED
/*
* Board NAND Info.
#undef CONFIG_DM9000_DEBUG
/* TWL4030 */
-#define CONFIG_TWL4030_LED 1
/* Board NAND Info */
#define CONFIG_JFFS2_NAND
/*
* TWL4030
*/
-#define CONFIG_TWL4030_LED
-#define CONFIG_TWL4030_KEYPAD
#define GPIO_SLIDE 71
/* DSS Support */
/* TWL4030 LED Support */
-#define CONFIG_TWL4030_LED
/* Environment */
#define CONFIG_ENV_SIZE SZ_128K
/*
* TWL4030
*/
-#define CONFIG_TWL4030_LED 1
/*
* Board NAND Info.
/* I2C Support */
/* TWL4030 LED */
-#define CONFIG_TWL4030_LED
/* USB EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
*/
/* TWL4030 LED */
-#define CONFIG_TWL4030_LED
/*
* NS16550 Configuration
/*
* TWL4030
*/
-#define CONFIG_TWL4030_LED 1
/*
* Board NAND Info.
* Input
*/
-#define CONFIG_TWL4030_INPUT
-
/*
* SPL
*/
/*
* TWL4030
*/
-#define CONFIG_TWL4030_LED
/*
* Board NAND Info.
#define CONFIG_SYS_EEPROM_BUS_NUM 1
/* TWL4030 */
-#define CONFIG_TWL4030_LED
/* Board NAND Info */
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
CONFIG_TULIP_SELECT_MEDIA
CONFIG_TULIP_USE_IO
CONFIG_TUXX1
-CONFIG_TWL4030_INPUT
-CONFIG_TWL4030_KEYPAD
-CONFIG_TWL4030_LED
CONFIG_TWL6030_INPUT
CONFIG_TWL6030_POWER
CONFIG_TWR