mmc: Continue polling MMC card for OCR only if it is still not ready

Some MMC cards come to ready state quite quickly, so that the respective
flag appears to be set in mmc_send_op_cond already. In this case trying
to continue polling the card with CMD1 in mmc_complete_op_cond is incorrect
and may lead to unpredictable results. So check the flag before polling
and skip it appropriately.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index d073d7900c36ff03d9f54d440828c0e7bb97ca5c..42af47c4c27372fc6e896c91ed2ae2288c013a7a 100644 (file)
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -403,15 +403,17 @@ static int mmc_complete_op_cond(struct mmc *mmc)
        int err;
 
        mmc->op_cond_pending = 0;
-       start = get_timer(0);
-       do {
-               err = mmc_send_op_cond_iter(mmc, 1);
-               if (err)
-                       return err;
-               if (get_timer(start) > timeout)
-                       return UNUSABLE_ERR;
-               udelay(100);
-       } while (!(mmc->ocr & OCR_BUSY));
+       if (!(mmc->ocr & OCR_BUSY)) {
+               start = get_timer(0);
+               do {
+                       err = mmc_send_op_cond_iter(mmc, 1);
+                       if (err)
+                               return err;
+                       if (get_timer(start) > timeout)
+                               return UNUSABLE_ERR;
+                       udelay(100);
+               } while (!(mmc->ocr & OCR_BUSY));
+       }
 
        if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
                cmd.cmdidx = MMC_CMD_SPI_READ_OCR;