# SPDX-License-Identifier: GPL-2.0+
#
-lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o divsi3.o \
- lshrdi3.o modsi3.o udivsi3.o umodsi3.o div0.o \
- uldivmod.o
+lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o \
+ lib1funcs.o uldivmod.o div0.o
ifdef CONFIG_CPU_V7M
obj-y += vectors_m.o crt0.o
+++ /dev/null
-#include <linux/linkage.h>
-
-.macro ARM_DIV_BODY dividend, divisor, result, curbit
-
-#if __LINUX_ARM_ARCH__ >= 5
-
- clz \curbit, \divisor
- clz \result, \dividend
- sub \result, \curbit, \result
- mov \curbit, #1
- mov \divisor, \divisor, lsl \result
- mov \curbit, \curbit, lsl \result
- mov \result, #0
-
-#else
-
- @ Initially shift the divisor left 3 bits if possible,
- @ set curbit accordingly. This allows for curbit to be located
- @ at the left end of each 4 bit nibbles in the division loop
- @ to save one loop in most cases.
- tst \divisor, #0xe0000000
- moveq \divisor, \divisor, lsl #3
- moveq \curbit, #8
- movne \curbit, #1
-
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
-1: cmp \divisor, #0x10000000
- cmplo \divisor, \dividend
- movlo \divisor, \divisor, lsl #4
- movlo \curbit, \curbit, lsl #4
- blo 1b
-
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
-1: cmp \divisor, #0x80000000
- cmplo \divisor, \dividend
- movlo \divisor, \divisor, lsl #1
- movlo \curbit, \curbit, lsl #1
- blo 1b
-
- mov \result, #0
-
-#endif
-
- @ Division loop
-1: cmp \dividend, \divisor
- subhs \dividend, \dividend, \divisor
- orrhs \result, \result, \curbit
- cmp \dividend, \divisor, lsr #1
- subhs \dividend, \dividend, \divisor, lsr #1
- orrhs \result, \result, \curbit, lsr #1
- cmp \dividend, \divisor, lsr #2
- subhs \dividend, \dividend, \divisor, lsr #2
- orrhs \result, \result, \curbit, lsr #2
- cmp \dividend, \divisor, lsr #3
- subhs \dividend, \dividend, \divisor, lsr #3
- orrhs \result, \result, \curbit, lsr #3
- cmp \dividend, #0 @ Early termination?
- movnes \curbit, \curbit, lsr #4 @ No, any more bits to do?
- movne \divisor, \divisor, lsr #4
- bne 1b
-
-.endm
-
-.macro ARM_DIV2_ORDER divisor, order
-
-#if __LINUX_ARM_ARCH__ >= 5
-
- clz \order, \divisor
- rsb \order, \order, #31
-
-#else
-
- cmp \divisor, #(1 << 16)
- movhs \divisor, \divisor, lsr #16
- movhs \order, #16
- movlo \order, #0
-
- cmp \divisor, #(1 << 8)
- movhs \divisor, \divisor, lsr #8
- addhs \order, \order, #8
-
- cmp \divisor, #(1 << 4)
- movhs \divisor, \divisor, lsr #4
- addhs \order, \order, #4
-
- cmp \divisor, #(1 << 2)
- addhi \order, \order, #3
- addls \order, \order, \divisor, lsr #1
-
-#endif
-
-.endm
-
- .align 5
-.globl __divsi3
-__divsi3:
-ENTRY(__aeabi_idiv)
- cmp r1, #0
- eor ip, r0, r1 @ save the sign of the result.
- beq Ldiv0
- rsbmi r1, r1, #0 @ loops below use unsigned.
- subs r2, r1, #1 @ division by 1 or -1 ?
- beq 10f
- movs r3, r0
- rsbmi r3, r0, #0 @ positive dividend value
- cmp r3, r1
- bls 11f
- tst r1, r2 @ divisor is power of 2 ?
- beq 12f
-
- ARM_DIV_BODY r3, r1, r0, r2
-
- cmp ip, #0
- rsbmi r0, r0, #0
- mov pc, lr
-
-10: teq ip, r0 @ same sign ?
- rsbmi r0, r0, #0
- mov pc, lr
-
-11: movlo r0, #0
- moveq r0, ip, asr #31
- orreq r0, r0, #1
- mov pc, lr
-
-12: ARM_DIV2_ORDER r1, r2
-
- cmp ip, #0
- mov r0, r3, lsr r2
- rsbmi r0, r0, #0
- mov pc, lr
-
-Ldiv0:
-
- str lr, [sp, #-4]!
- bl __div0
- mov r0, #0 @ About as wrong as it could be.
- ldr pc, [sp], #4
-ENDPROC(__aeabi_idiv)
--- /dev/null
+/*
+ * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
+ *
+ * Author: Nicolas Pitre <nico@fluxnic.net>
+ * - contributed to gcc-3.4 on Sep 30, 2003
+ * - adapted for the Linux kernel on Oct 2, 2003
+ */
+
+/* Copyright 1995, 1996, 1998, 1999, 2000, 2003 Free Software Foundation, Inc.
+
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * U-Boot compatibility bit, define empty UNWIND() macro as, since we
+ * do not support stack unwinding and define CONFIG_AEABI to make all
+ * of the functions available without diverging from Linux code.
+ */
+#ifdef __UBOOT__
+#define UNWIND(x...)
+#define CONFIG_AEABI
+#endif
+
+.macro ARM_DIV_BODY dividend, divisor, result, curbit
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+ clz \curbit, \divisor
+ clz \result, \dividend
+ sub \result, \curbit, \result
+ mov \curbit, #1
+ mov \divisor, \divisor, lsl \result
+ mov \curbit, \curbit, lsl \result
+ mov \result, #0
+
+#else
+
+ @ Initially shift the divisor left 3 bits if possible,
+ @ set curbit accordingly. This allows for curbit to be located
+ @ at the left end of each 4 bit nibbles in the division loop
+ @ to save one loop in most cases.
+ tst \divisor, #0xe0000000
+ moveq \divisor, \divisor, lsl #3
+ moveq \curbit, #8
+ movne \curbit, #1
+
+ @ Unless the divisor is very big, shift it up in multiples of
+ @ four bits, since this is the amount of unwinding in the main
+ @ division loop. Continue shifting until the divisor is
+ @ larger than the dividend.
+1: cmp \divisor, #0x10000000
+ cmplo \divisor, \dividend
+ movlo \divisor, \divisor, lsl #4
+ movlo \curbit, \curbit, lsl #4
+ blo 1b
+
+ @ For very big divisors, we must shift it a bit at a time, or
+ @ we will be in danger of overflowing.
+1: cmp \divisor, #0x80000000
+ cmplo \divisor, \dividend
+ movlo \divisor, \divisor, lsl #1
+ movlo \curbit, \curbit, lsl #1
+ blo 1b
+
+ mov \result, #0
+
+#endif
+
+ @ Division loop
+1: cmp \dividend, \divisor
+ subhs \dividend, \dividend, \divisor
+ orrhs \result, \result, \curbit
+ cmp \dividend, \divisor, lsr #1
+ subhs \dividend, \dividend, \divisor, lsr #1
+ orrhs \result, \result, \curbit, lsr #1
+ cmp \dividend, \divisor, lsr #2
+ subhs \dividend, \dividend, \divisor, lsr #2
+ orrhs \result, \result, \curbit, lsr #2
+ cmp \dividend, \divisor, lsr #3
+ subhs \dividend, \dividend, \divisor, lsr #3
+ orrhs \result, \result, \curbit, lsr #3
+ cmp \dividend, #0 @ Early termination?
+ movnes \curbit, \curbit, lsr #4 @ No, any more bits to do?
+ movne \divisor, \divisor, lsr #4
+ bne 1b
+
+.endm
+
+
+.macro ARM_DIV2_ORDER divisor, order
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+ clz \order, \divisor
+ rsb \order, \order, #31
+
+#else
+
+ cmp \divisor, #(1 << 16)
+ movhs \divisor, \divisor, lsr #16
+ movhs \order, #16
+ movlo \order, #0
+
+ cmp \divisor, #(1 << 8)
+ movhs \divisor, \divisor, lsr #8
+ addhs \order, \order, #8
+
+ cmp \divisor, #(1 << 4)
+ movhs \divisor, \divisor, lsr #4
+ addhs \order, \order, #4
+
+ cmp \divisor, #(1 << 2)
+ addhi \order, \order, #3
+ addls \order, \order, \divisor, lsr #1
+
+#endif
+
+.endm
+
+
+.macro ARM_MOD_BODY dividend, divisor, order, spare
+
+#if __LINUX_ARM_ARCH__ >= 5
+
+ clz \order, \divisor
+ clz \spare, \dividend
+ sub \order, \order, \spare
+ mov \divisor, \divisor, lsl \order
+
+#else
+
+ mov \order, #0
+
+ @ Unless the divisor is very big, shift it up in multiples of
+ @ four bits, since this is the amount of unwinding in the main
+ @ division loop. Continue shifting until the divisor is
+ @ larger than the dividend.
+1: cmp \divisor, #0x10000000
+ cmplo \divisor, \dividend
+ movlo \divisor, \divisor, lsl #4
+ addlo \order, \order, #4
+ blo 1b
+
+ @ For very big divisors, we must shift it a bit at a time, or
+ @ we will be in danger of overflowing.
+1: cmp \divisor, #0x80000000
+ cmplo \divisor, \dividend
+ movlo \divisor, \divisor, lsl #1
+ addlo \order, \order, #1
+ blo 1b
+
+#endif
+
+ @ Perform all needed subtractions to keep only the reminder.
+ @ Do comparisons in batch of 4 first.
+ subs \order, \order, #3 @ yes, 3 is intended here
+ blt 2f
+
+1: cmp \dividend, \divisor
+ subhs \dividend, \dividend, \divisor
+ cmp \dividend, \divisor, lsr #1
+ subhs \dividend, \dividend, \divisor, lsr #1
+ cmp \dividend, \divisor, lsr #2
+ subhs \dividend, \dividend, \divisor, lsr #2
+ cmp \dividend, \divisor, lsr #3
+ subhs \dividend, \dividend, \divisor, lsr #3
+ cmp \dividend, #1
+ mov \divisor, \divisor, lsr #4
+ subges \order, \order, #4
+ bge 1b
+
+ tst \order, #3
+ teqne \dividend, #0
+ beq 5f
+
+ @ Either 1, 2 or 3 comparison/subtractions are left.
+2: cmn \order, #2
+ blt 4f
+ beq 3f
+ cmp \dividend, \divisor
+ subhs \dividend, \dividend, \divisor
+ mov \divisor, \divisor, lsr #1
+3: cmp \dividend, \divisor
+ subhs \dividend, \dividend, \divisor
+ mov \divisor, \divisor, lsr #1
+4: cmp \dividend, \divisor
+ subhs \dividend, \dividend, \divisor
+5:
+.endm
+
+
+ENTRY(__udivsi3)
+ENTRY(__aeabi_uidiv)
+UNWIND(.fnstart)
+
+ subs r2, r1, #1
+ reteq lr
+ bcc Ldiv0
+ cmp r0, r1
+ bls 11f
+ tst r1, r2
+ beq 12f
+
+ ARM_DIV_BODY r0, r1, r2, r3
+
+ mov r0, r2
+ ret lr
+
+11: moveq r0, #1
+ movne r0, #0
+ ret lr
+
+12: ARM_DIV2_ORDER r1, r2
+
+ mov r0, r0, lsr r2
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__udivsi3)
+ENDPROC(__aeabi_uidiv)
+
+ENTRY(__umodsi3)
+UNWIND(.fnstart)
+
+ subs r2, r1, #1 @ compare divisor with 1
+ bcc Ldiv0
+ cmpne r0, r1 @ compare dividend with divisor
+ moveq r0, #0
+ tsthi r1, r2 @ see if divisor is power of 2
+ andeq r0, r0, r2
+ retls lr
+
+ ARM_MOD_BODY r0, r1, r2, r3
+
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__umodsi3)
+
+ENTRY(__divsi3)
+ENTRY(__aeabi_idiv)
+UNWIND(.fnstart)
+
+ cmp r1, #0
+ eor ip, r0, r1 @ save the sign of the result.
+ beq Ldiv0
+ rsbmi r1, r1, #0 @ loops below use unsigned.
+ subs r2, r1, #1 @ division by 1 or -1 ?
+ beq 10f
+ movs r3, r0
+ rsbmi r3, r0, #0 @ positive dividend value
+ cmp r3, r1
+ bls 11f
+ tst r1, r2 @ divisor is power of 2 ?
+ beq 12f
+
+ ARM_DIV_BODY r3, r1, r0, r2
+
+ cmp ip, #0
+ rsbmi r0, r0, #0
+ ret lr
+
+10: teq ip, r0 @ same sign ?
+ rsbmi r0, r0, #0
+ ret lr
+
+11: movlo r0, #0
+ moveq r0, ip, asr #31
+ orreq r0, r0, #1
+ ret lr
+
+12: ARM_DIV2_ORDER r1, r2
+
+ cmp ip, #0
+ mov r0, r3, lsr r2
+ rsbmi r0, r0, #0
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__divsi3)
+ENDPROC(__aeabi_idiv)
+
+ENTRY(__modsi3)
+UNWIND(.fnstart)
+
+ cmp r1, #0
+ beq Ldiv0
+ rsbmi r1, r1, #0 @ loops below use unsigned.
+ movs ip, r0 @ preserve sign of dividend
+ rsbmi r0, r0, #0 @ if negative make positive
+ subs r2, r1, #1 @ compare divisor with 1
+ cmpne r0, r1 @ compare dividend with divisor
+ moveq r0, #0
+ tsthi r1, r2 @ see if divisor is power of 2
+ andeq r0, r0, r2
+ bls 10f
+
+ ARM_MOD_BODY r0, r1, r2, r3
+
+10: cmp ip, #0
+ rsbmi r0, r0, #0
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__modsi3)
+
+#ifdef CONFIG_AEABI
+
+ENTRY(__aeabi_uidivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr} )
+
+ stmfd sp!, {r0, r1, ip, lr}
+ bl __aeabi_uidiv
+ ldmfd sp!, {r1, r2, ip, lr}
+ mul r3, r0, r2
+ sub r1, r1, r3
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__aeabi_uidivmod)
+
+ENTRY(__aeabi_idivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr} )
+ stmfd sp!, {r0, r1, ip, lr}
+ bl __aeabi_idiv
+ ldmfd sp!, {r1, r2, ip, lr}
+ mul r3, r0, r2
+ sub r1, r1, r3
+ ret lr
+
+UNWIND(.fnend)
+ENDPROC(__aeabi_idivmod)
+
+#endif
+
+Ldiv0:
+UNWIND(.fnstart)
+UNWIND(.pad #4)
+UNWIND(.save {lr})
+ str lr, [sp, #-8]!
+ bl __div0
+ mov r0, #0 @ About as wrong as it could be.
+ ldr pc, [sp], #8
+UNWIND(.fnend)
+ENDPROC(Ldiv0)
+++ /dev/null
-#include <linux/linkage.h>
-
-.macro ARM_MOD_BODY dividend, divisor, order, spare
-
-#if __LINUX_ARM_ARCH__ >= 5
-
- clz \order, \divisor
- clz \spare, \dividend
- sub \order, \order, \spare
- mov \divisor, \divisor, lsl \order
-
-#else
-
- mov \order, #0
-
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
-1: cmp \divisor, #0x10000000
- cmplo \divisor, \dividend
- movlo \divisor, \divisor, lsl #4
- addlo \order, \order, #4
- blo 1b
-
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
-1: cmp \divisor, #0x80000000
- cmplo \divisor, \dividend
- movlo \divisor, \divisor, lsl #1
- addlo \order, \order, #1
- blo 1b
-
-#endif
-
- @ Perform all needed substractions to keep only the reminder.
- @ Do comparisons in batch of 4 first.
- subs \order, \order, #3 @ yes, 3 is intended here
- blt 2f
-
-1: cmp \dividend, \divisor
- subhs \dividend, \dividend, \divisor
- cmp \dividend, \divisor, lsr #1
- subhs \dividend, \dividend, \divisor, lsr #1
- cmp \dividend, \divisor, lsr #2
- subhs \dividend, \dividend, \divisor, lsr #2
- cmp \dividend, \divisor, lsr #3
- subhs \dividend, \dividend, \divisor, lsr #3
- cmp \dividend, #1
- mov \divisor, \divisor, lsr #4
- subges \order, \order, #4
- bge 1b
-
- tst \order, #3
- teqne \dividend, #0
- beq 5f
-
- @ Either 1, 2 or 3 comparison/substractions are left.
-2: cmn \order, #2
- blt 4f
- beq 3f
- cmp \dividend, \divisor
- subhs \dividend, \dividend, \divisor
- mov \divisor, \divisor, lsr #1
-3: cmp \dividend, \divisor
- subhs \dividend, \dividend, \divisor
- mov \divisor, \divisor, lsr #1
-4: cmp \dividend, \divisor
- subhs \dividend, \dividend, \divisor
-5:
-.endm
-
- .align 5
-ENTRY(__modsi3)
- cmp r1, #0
- beq Ldiv0
- rsbmi r1, r1, #0 @ loops below use unsigned.
- movs ip, r0 @ preserve sign of dividend
- rsbmi r0, r0, #0 @ if negative make positive
- subs r2, r1, #1 @ compare divisor with 1
- cmpne r0, r1 @ compare dividend with divisor
- moveq r0, #0
- tsthi r1, r2 @ see if divisor is power of 2
- andeq r0, r0, r2
- bls 10f
-
- ARM_MOD_BODY r0, r1, r2, r3
-
-10: cmp ip, #0
- rsbmi r0, r0, #0
- mov pc, lr
-ENDPROC(__modsi3)
-
-Ldiv0:
-
- str lr, [sp, #-4]!
- bl __div0
- mov r0, #0 @ About as wrong as it could be.
- ldr pc, [sp], #4
+++ /dev/null
-#include <linux/linkage.h>
-
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-dividend .req r0
-divisor .req r1
-result .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .globl __udivsi3
- .type __udivsi3 ,function
- .globl __aeabi_uidiv
- .type __aeabi_uidiv ,function
- .align 0
- __udivsi3:
- __aeabi_uidiv:
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- mov result, #0
- cmp dividend, divisor
- bcc Lgot_result
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions, and note which bits
- @ are done in the result. On the final pass, this may subtract
- @ too much from the dividend, but the result will be ok, since the
- @ "bit" will have been shifted out at the bottom.
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- orrcs result, result, curbit
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs result, result, curbit, lsr #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs result, result, curbit, lsr #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs result, result, curbit, lsr #3
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
-Lgot_result:
- mov r0, result
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __udivsi3 , . - __udivsi3
-
-ENTRY(__aeabi_uidivmod)
-
- stmfd sp!, {r0, r1, ip, lr}
- bl __aeabi_uidiv
- ldmfd sp!, {r1, r2, ip, lr}
- mul r3, r0, r2
- sub r1, r1, r3
- mov pc, lr
-ENDPROC(__aeabi_uidivmod)
-
-ENTRY(__aeabi_idivmod)
-
- stmfd sp!, {r0, r1, ip, lr}
- bl __aeabi_idiv
- ldmfd sp!, {r1, r2, ip, lr}
- mul r3, r0, r2
- sub r1, r1, r3
- mov pc, lr
-ENDPROC(__aeabi_idivmod)
+++ /dev/null
-#include <linux/linkage.h>
-
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-/* # 145 "libgcc1.S" */
-dividend .req r0
-divisor .req r1
-overdone .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .type __umodsi3 ,function
- .align 0
- ENTRY(__umodsi3)
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- cmp dividend, divisor
- movcc pc, lr
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions. On the final pass, this may
- @ subtract too much from the dividend, so keep track of which
- @ subtractions are done, we can fix them up afterwards...
- mov overdone, #0
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs overdone, overdone, curbit, ror #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs overdone, overdone, curbit, ror #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs overdone, overdone, curbit, ror #3
- mov ip, curbit
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
- @ Any subtractions that we should not have done will be recorded in
- @ the top three bits of "overdone". Exactly which were not needed
- @ are governed by the position of the bit, stored in ip.
- @ If we terminated early, because dividend became zero,
- @ then none of the below will match, since the bit in ip will not be
- @ in the bottom nibble.
- ands overdone, overdone, #0xe0000000
- moveq pc, lr @ No fixups needed
- tst overdone, ip, ror #3
- addne dividend, dividend, divisor, lsr #3
- tst overdone, ip, ror #2
- addne dividend, dividend, divisor, lsr #2
- tst overdone, ip, ror #1
- addne dividend, dividend, divisor, lsr #1
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __umodsi3 , . - __umodsi3
-/* # 320 "libgcc1.S" */
-/* # 421 "libgcc1.S" */
-/* # 433 "libgcc1.S" */
-/* # 456 "libgcc1.S" */
-/* # 500 "libgcc1.S" */
-/* # 580 "libgcc1.S" */
-ENDPROC(__umodsi3)
projects / u-boot.git / commitdiff
